Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Feit Electric 2x2 LED Troffer Light, Model TR2X2G2/6WY/WH. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
CAUTION: Suitable for damp locations. Do not use where directly exposed to water.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electric Code (NEC).
- If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- Do not attempt to alter the fixture. Any alterations may void the warranty and create a safety hazard.
- This fixture is designed for 120-277V operation. Verify your supply voltage before installation.
Package Contents
Verify that all components are present before installation:
- 1 x Feit Electric 2x2 LED Troffer Light (Model TR2X2G2/6WY/WH)
- Instruction Manual
Image: Front view of the Feit Electric 2x2 LED Troffer Light.
Setup and Installation
This LED troffer light is designed for lay-in installation in standard T-grid ceilings. It includes a hook mount for simplified wiring.
Tools Required (Not Included):
- Screwdriver
- Wire Strippers
- Pliers
- Safety Glasses
Installation Steps:
- Turn Off Power: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker or fuse box.
- Prepare Ceiling Opening: Ensure the ceiling grid opening is a standard 2x2 foot size.
- Connect Wiring:
- Open the wiring compartment on the back of the fixture.
- Connect the incoming AC power wires to the fixture's wires: Black to Black (Line), White to White (Neutral), and Green to Green (Ground).
- If using 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the fixture to the corresponding wires from your 0-10V dimmer (dimmer not included). Ensure proper polarity.
- Secure all connections with appropriate wire connectors.
- Position Fixture: Carefully place the LED troffer into the T-grid ceiling opening. The fixture is lightweight and designed for easy handling.
- Secure Fixture (Optional but Recommended): Use the integrated hook mounts to secure the fixture to the ceiling grid for added stability.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Image: Example of the Feit Electric 2x2 LED Troffer Light installed in a T-grid ceiling.
Operating Instructions
Color Temperature Selection (5CCT)
Your Feit Electric LED Troffer Light features selectable color temperatures, allowing you to choose from five options:
- Soft White (3000K)
- Neutral White (3500K)
- Bright White (4000K)
- Daylight (5000K)
- Daylight Deluxe (6500K)
You can select the desired color temperature in two ways:
- Before Installation: Locate the CCT selection switch on the side of the fixture. Slide the switch to your preferred color temperature setting.
- After Installation (Wall Switch Toggle): If the CCT selection switch is set to 'SWITCH' mode, you can cycle through the color temperatures by quickly toggling your standard wall switch OFF and ON. The fixture will remember the last selected setting after a few seconds.
Image: Diagram illustrating the 5CCT selection options and methods.
0-10V Dimming
This fixture is equipped for 0-10V dimming. It is not compatible with standard residential dimmers. To utilize the dimming function, connect the purple (DIM+) and gray (DIM-) wires to a compatible 0-10V dimmer (sold separately). This allows for smooth dimming from 10% to 100% light output.
Maintenance
The Feit Electric 2x2 LED Troffer Light is designed for long-lasting, maintenance-free operation. No user-serviceable parts are inside.
- Cleaning: To clean the fixture, ensure power is off. Use a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or optical components.
- Lamp Replacement: The LEDs are integrated and not replaceable. The fixture has a rated life of 50,000 hours.
Troubleshooting
If you experience issues with your LED Troffer Light, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. Loose wiring connection. Faulty fixture. | Check circuit breaker/fuse. Verify all wire connections are secure (ensure power is off first). Contact customer support if problem persists. |
| Light flickers. | Incompatible dimmer. Loose wiring. Voltage fluctuations. | Ensure a 0-10V dimmer is used for dimming. Check wiring connections. Consult an electrician to check power supply. |
| Incorrect color temperature. | CCT switch set incorrectly. | Adjust the CCT switch on the fixture or toggle the wall switch if in 'SWITCH' mode. |
Specifications
Detailed specifications for the Feit Electric 2x2 LED Troffer Light:
Image: Visual representation of the fixture's dimensions and key specifications.
| Specification | Value |
|---|---|
| Model Number | TR2X2G2/6WY/WH |
| Dimensions (L x W x H) | 23.8"L x 23.8"W x 1.7"H |
| Wattage | 40 Watts |
| Brightness | 4000 Lumens |
| Efficiency | 100 Lumens per Watt |
| Color Temperature (CCT) | 3000K, 3500K, 4000K, 5000K, 6500K Selectable |
| Voltage | 120-277 Volts |
| Dimming | 0-10V Dimmable (dimmer not included) |
| Rated Life | 50,000 Hours |
| Material | Aluminum, Acrylic |
| Finish | White |
| Installation Type | Lay-in |
| Indoor/Outdoor Usage | Indoor (Damp Location Rated) |
| Item Weight | 4.7 Pounds |
Warranty
This Feit Electric product is covered by a 5-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please contact Feit Electric customer support.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:
- Website: www.feit.com
- Phone: Refer to the Feit Electric website for current contact numbers.
