Aokrean Plant Grow Light User Manual

1. Introduction

1.1 Product Overview

The Aokrean Plant Grow Light (Model BL-C10A) is designed to provide optimal lighting conditions for indoor plants. Featuring 48 LEDs, it offers a full spectrum of light, including white, warm white, and red, to support various growth stages. The lamp is height-adjustable and includes a stable base, offering versatile installation options. It comes with an intelligent controller for adjusting brightness, spectrum, and setting automatic timers.

Figure 1: Aokrean Plant Grow Light with its base and intelligent controller.

1.2 Package Contents

Please check the package carefully to ensure all components are present and in good condition.

• Aokrean Halo Grow Light (1 unit)
• Power Adapter (1 unit)
• Adjustable Pole (1 unit)
• ABS Base (1 unit)
• User Manual (1 unit)

Figure 2: Contents of the Aokrean Plant Grow Light package, including the light, pole, base, power adapter, and user manual.

2. Safety Instructions

To ensure safe operation and prolong the lifespan of your grow light, please read and follow these instructions carefully:

• This product is designed for indoor use only. Do not expose it to outdoor elements.
• Ensure the power adapter and cable are not damaged before use. Do not operate the light with a damaged cord or plug.
• Keep the light away from water or other liquids, despite its waterproof rating, to prevent electrical hazards.
• Do not disassemble or modify the product. Unauthorized modifications may void the warranty and pose safety risks.
• Always unplug the light from the power source before cleaning or performing any maintenance.
• Place the light on a stable, level surface. When using the base, ensure a heavy pot is placed on it for stability.
• Do not look directly into the LED lights for extended periods, as this may cause eye strain.
• Keep out of reach of children and pets.

3. Product Features

• Full Spectrum Lighting: Equipped with 48 LEDs, providing a comprehensive light spectrum suitable for all plant growth stages.
• 3 Lighting Modes: Choose between White Light, Warm White & Red Light, or a Mix Lighting (All Light On) to cater to different plant needs.
• 10 Brightness Levels: Adjustable brightness from 10% to 100% to provide the precise light intensity required.
• Cycle Timer Function: Built-in timer with 3 modes (3H, 9H, 12H) for automatic daily on/off cycles.
• Height and Angle Adjustment: The telescopic pole allows height adjustment up to 26 inches (66 cm), and the light head can rotate 90 degrees for optimal coverage.
• Two Installation Methods: Can be used with the provided stable base or inserted directly into the soil.

Figure 3: Illustration of the three available lighting spectrums: White Light, Warm White & Red Light, and All Light On (Mix Lighting).

Figure 4: The adjustable pole allows for varying heights to accommodate plants of different sizes, from 6.5 inches to 26 inches.

4. Setup and Installation

The Aokrean Plant Grow Light offers two convenient installation methods:

4.1 Method 1: Using the Detachable Base

1. Insert Pole into Base: Gently insert the bottom end of the adjustable pole into the designated slot on the ABS base.

Figure 5: Inserting the pole into the base.
2. Place Potted Plant on Base: Position your potted plant directly onto the base, ensuring the pot's weight presses down on the base for stability. This is crucial for preventing the light from tipping over.


Figure 6: Placing the potted plant on the base.

3. Adjust Height: Extend or retract the telescopic pole to adjust the height of the light according to your plant's needs. Ensure the light is positioned at an appropriate distance from the plant canopy.


Figure 7: Adjusting the height of the light.

4. Adjust Angle: The light head can be rotated 90 degrees to direct light precisely where needed.

Figure 8: Adjusting the angle of the light head.

4.2 Method 2: Inserting into Soil

1. Insert into Soil: Remove the base and gently insert the pointed end of the pole directly into the soil of your potted plant. Ensure it is stable and upright.
2. Adjust Height: Extend or retract the telescopic pole to set the desired height for your plant.
3. Adjust Angle: Rotate the light head to direct illumination as required.

Figure 9: Overview of both installation methods: with the detachable base or directly into the soil.

5. Operating Instructions

The Aokrean Plant Grow Light is controlled via an intelligent inline controller on the power cord. Connect the USB cable to the power adapter and plug it into a standard wall outlet.

Figure 10: The intelligent inline controller.

5.1 Controller Functions

Note on Timer: Once a timer setting (3H, 9H, or 12H) is selected, the light will operate for that duration and then turn off. It will automatically turn on again at the same time the next day, maintaining a 24-hour cycle. If the power is interrupted, you may need to reset the timer.

6. Maintenance

• Cleaning: Ensure the light is unplugged before cleaning. Use a soft, dry cloth to wipe down the light head and pole. Do not use abrasive cleaners or immerse any part of the light in water.
• Storage: If storing the light for an extended period, unplug it, clean it, and store it in a cool, dry place away from direct sunlight and moisture.
• Inspection: Periodically inspect the power cord and connections for any signs of wear or damage. If damage is found, discontinue use and contact customer support.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Aokrean is committed to providing high-quality products. For any questions, concerns, or technical support regarding your Plant Grow Light, please contact Aokrean customer service through the retailer's platform or the official Aokrean website. Please retain your proof of purchase for warranty claims.

For more information about Aokrean products, visit the official Aokrean Store: Aokrean Store on Amazon