Ourlife Action Camera User Manual

Introduction

Welcome to the Ourlife Action Camera user manual. This guide provides comprehensive instructions for setting up, operating, and maintaining your new 5K 30FPS Ultra HD Waterproof Camera. Designed for capturing high-quality photos and videos in various environments, it features Gyro Stabilization, 48MP photo capability, a front LCD, and a touch rear screen. Please read this manual thoroughly before use to ensure optimal performance and safety.

Important Safety Information

• Waterproof Usage: Ensure the waterproof case is properly sealed and free of debris before submerging the camera in water. Test the case without the camera first.
• Battery Safety: Use only specified batteries. Do not expose batteries to high temperatures or dispose of them in fire. Keep batteries out of reach of children.
• Operating Temperature: Avoid using the camera in extreme temperatures (below 0°C or above 45°C) to prevent damage.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use harsh chemicals or solvents.
• Disassembly: Do not attempt to disassemble or modify the camera, as this will void the warranty and may cause damage.

Package Contents

• Ourlife Action Camera
• Waterproof Case
• Rechargeable Lithium Ion Batteries (x2)
• USB Charging Cable
• Mounting Accessories (e.g., helmet mount, bicycle mount, adhesive mounts)
• User Manual

Product Overview

Familiarize yourself with the various parts of your Ourlife Action Camera:

Figure 1: Main view of the Ourlife Action Camera, showcasing its compact design and primary lens.

Figure 2: Front view of the camera, highlighting the front LCD screen and the main touch rear screen.

Figure 3: The Ourlife Action Camera securely enclosed within its waterproof housing, ready for underwater adventures.

Getting Started

1. Battery Installation

1. Locate the battery compartment on the bottom of the camera.
2. Slide the battery door latch to open the compartment.
3. Insert the Lithium Ion battery, ensuring the contacts align correctly.
4. Close the battery door firmly until it clicks into place.

2. MicroSD Card Installation

A MicroSD card (not included) is required to store photos and videos. A Class 10 U3 or higher speed rating is recommended for optimal performance.

1. Open the side port cover of the camera.
2. Insert the MicroSD card into the slot with the contacts facing the front of the camera until it clicks.
3. To remove, gently push the card until it springs out.

3. Charging the Battery

1. Connect the USB charging cable to the camera's USB port.
2. Connect the other end of the cable to a USB power adapter (5V/1A recommended) or a computer's USB port.
3. The charging indicator light will illuminate during charging and turn off when fully charged.

Operating Your Camera

Power On/Off

• Power On: Press and hold the Power/Mode button for 3 seconds.
• Power Off: Press and hold the Power/Mode button for 3 seconds.

Mode Switching

Press the Power/Mode button repeatedly to cycle through different modes: Video, Photo, Playback, and Settings.

Video Recording

1. Switch to Video mode.
2. Press the Shutter/OK button to start recording. A red indicator light will flash.
3. Press the Shutter/OK button again to stop recording.
4. To change video resolution (e.g., 5K, 4K, 1080p), navigate to the Video Settings menu.

Photo Capture

1. Switch to Photo mode.
2. Press the Shutter/OK button to take a photo.
3. Explore photo modes like Single Shot, Burst, and Timer in the Photo Settings menu.

Playback

1. Switch to Playback mode.
2. Use the Up/Down buttons or touch screen to navigate through your recorded videos and photos.
3. Press the Shutter/OK button to play a video or view a photo in full screen.

Settings Menu Navigation

From any mode, press the Power/Mode button until you reach the Settings icon. Use the touch screen or navigation buttons to select and adjust various camera settings, including resolution, stabilization, diving mode, wind noise reduction, date/time, and more.

Waterproof Usage (Diving Mode)

• Always ensure the camera is securely placed inside the waterproof case and the seal is clean and intact before any water activity.
• Activate "Diving Mode" in the settings for optimized color balance in underwater environments.
• After use in saltwater, rinse the waterproof case with fresh water and allow it to air dry.

Care and Maintenance

Cleaning the Camera

• Use a soft, lint-free cloth to wipe the camera body and screens.
• For the lens, use a specialized lens cleaning cloth and solution. Avoid touching the lens with your fingers.
• Ensure all ports and covers are closed before cleaning with a damp cloth.

Storage

• Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
• Remove batteries if storing for extended periods to prevent leakage.
• Keep the camera and accessories in their original packaging or a protective case to prevent scratches and damage.

Troubleshooting

Technical Specifications

Warranty and Support

Ourlife products are manufactured to the highest quality standards. For warranty information, technical support, or any inquiries regarding your Ourlife Action Camera, please refer to the contact information provided on the product packaging or visit the official Ourlife website. Please retain your proof of purchase for warranty claims.