Introduction
Welcome to the user manual for your HUIYEETEX AC114-01 1-Channel Blinds Controller. This guide provides instructions for setup, operation, and troubleshooting to ensure optimal performance of your motorized roller shades and blinds. Please read this manual thoroughly before using the product.
Product Overview
The HUIYEETEX AC114-01 is a single-channel remote control designed for effortless operation of motorized roller shades and blinds. It allows you to raise, lower, and stop your blinds with the push of a button.
Image: The HUIYEETEX AC114-01 controller, showing its front with control buttons and its back with battery compartment and model information, alongside its wall mount.
Key Features
- Easy Installation: Comes with a mounting bracket for secure wall installation.
- Convenient Control: Automate your motorized roller shades with a single remote.
- Effortless Operation: Raise or lower blinds to the desired position with a button press.
- Extended Control Range: Operates up to 115 feet (655 feet in open areas).
Technical Specifications
| Frequency | 433.92MHz |
| Radiation Power | ≤10mW |
| Working Temperature | -10℃ ~ +50℃ |
| Dimensions | 4.84 x 1.77 x 0.6 inches |
| Item Weight | 2.89 ounces |
| Batteries | 4 Lithium Metal batteries required |
| Compatible Devices | A-OK Shade motor |
Image: A visual representation of the AC114-01 remote with its dimensions and a table listing its technical specifications.
Compatibility Information
The AC114-01 controller is designed to be a direct replacement for existing controllers of the same shape or model. It is specifically compatible with A-OK Shade motors.
Important Notice: This controller is not compatible with other brands. Please verify your existing controller's brand and model before use to ensure compatibility.
Image: A visual warning about the remote's compatibility, stating it works only with the same shape or model and not with other brands.
Installation
Mounting the Remote Holder
The AC114-01 controller comes with a mounting bracket for convenient wall installation. This helps keep the remote secure and easily accessible, preventing it from being misplaced.
Image: The AC114-01 remote control and its wall-mountable holder, demonstrating how it can be installed on a wall.
Setup and Programming
Follow these steps to program your AC114-01 remote control with your motorized blinds.
1. Selecting the Channel for Programming (for Multi-Shade remotes)
Press the "Channel +" or "Channel -" button to select the desired channel. A single channel will illuminate. For all blinds, ensure all channels are lit.
2. Setting Upper/Lower Position for the Shade
Press and hold the insert button on the back of the control for 5 seconds. The shade motor will jog once, indicating it is in limit setting mode. Use the UP and DOWN buttons to adjust the desired upper or lower position. Press the STOP button to save the limit position. The shade rotates briefly up and down, confirming the limit position is set.
3. Deleting All Memory (resets the motor to factory settings)
Press the P.O.I.R.G button on the motor for 7 seconds. The motor will jog once, then jog twice after 7 seconds, indicating all memories are deleted. Press the PROG button on the motor for 7 seconds. The motor will jog once, then jog twice later, confirming all limits have been deleted.
4. Adding a New Controller to a Shade (Multiple controllers linked to one shade)
Press and hold the "Stop" button of the programmed transmitter for 5 seconds. The motor will jog once. Then, press the "Up" button of the new transmitter. The motor will jog once, indicating new programming is finished.
Image: A detailed diagram illustrating the programming steps for the AC114 remote, including channel selection, setting limits, deleting memory, and adding new remotes.
Image: A step-by-step visual guide on how to add an additional remote control or clone a channel for your motorized blinds.
Operation
The AC114-01 controller provides simple button-press operation for your motorized blinds. Ensure the remote is within range of the motorized shades.
- Up Button (▲): Press to raise the blinds.
- Down Button (▼): Press to lower the blinds.
- Stop Button (●): Press to halt the blinds at their current position.
Image: A living room with multiple windows showcasing motorized roller shades, controlled wirelessly by the AC114-01 remote.
Image: A hand pressing the control button on the AC114-01 remote, demonstrating the ease of operating motorized roller shades.
Troubleshooting
Common Issues and Solutions
| Problem | Possible Cause / Solution |
|---|---|
| Motor does not turn after installation. |
|
| Motor stops working during operation. |
|
Maintenance
Battery Replacement
The AC114-01 controller requires 4 Lithium Metal batteries. When the remote's performance degrades, the control range decreases, or it stops responding, it is time to replace the batteries. To replace, open the battery compartment on the back of the remote, remove the old batteries, and insert new ones, ensuring correct polarity.
Image: The back of the AC114-01 remote control, highlighting the battery compartment for easy access during replacement.
Warranty and Support
For detailed warranty information, technical assistance, or customer support, please refer to the HUIYEETEX official website or contact your authorized retailer. Please retain your purchase receipt as proof of purchase for any warranty claims.
