Redragon GS520

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Redragon GS520 RGB Desktop Speakers Instruction Manual

Model: GS520 | Brand: Redragon

Introduction

The Redragon GS520 RGB Desktop Speakers are designed to provide an enhanced audio experience for your computer, TV, or laptop. Featuring a 2.0 channel stereo core, these speakers deliver clear and detailed sound. The integrated RGB lighting offers 6 customizable modes to match your setup's aesthetic. With easy-access volume controls and a simple plug-and-play setup, the GS520 speakers are a convenient addition to any desktop environment.

Redragon GS520 RGB Desktop Speakers highlighting features like Clear Bass, Brushed Texture, Plug & Play, 2.0 Channel, Touch Control, and 6 RGB Modes.

Image: Redragon GS520 RGB Desktop Speakers showcasing key features.

What's in the Box

Upon unboxing your Redragon GS520 speakers, you should find the following components:

  • GS520 Speaker (2 units)

Setup Instructions

Follow these steps to connect your Redragon GS520 RGB Desktop Speakers:

  1. Position the Speakers: Place the two speakers on your desktop or desired surface. Ensure they are within 31 inches (80 cm) of each other for optimal stereo separation, as this is the maximum cable length between the two units.
  2. Connect to Power: Plug the USB connector from the speakers into an available USB port on your computer, laptop, or a USB power adapter. The speakers are USB powered.
  3. Connect Audio: Plug the 3.5mm audio jack from the speakers into the audio output port (headphone jack) of your computer, TV, or laptop.
  4. Verify Connection: Once both USB and 3.5mm audio cables are connected, the speakers should power on and be ready for use.
Redragon GS520 RGB Desktop Speakers connected to a monitor, showing the maximum cable length between speakers.

Image: Redragon GS520 speakers connected to a computer setup, illustrating cable length.

Operating Instructions

The Redragon GS520 speakers feature intuitive controls for volume and lighting:

  • Power ON/OFF: Press and hold the power button (⏻) located on the right speaker to turn the speakers on or off.
  • Volume Control: Use the volume up (🔊+) and volume down (🔉-) buttons on the right speaker to adjust the audio output level.
  • RGB Lighting Control: The speakers feature 6 colorful LED modes. To cycle through these modes, lightly tap the touch-control sensor (lightbulb icon) located on the top of the right speaker. To turn off the lighting, continue tapping until the lights are off.
Close-up of Redragon GS520 speaker controls, showing volume buttons and RGB touch sensor.

Image: Detailed view of the volume and RGB lighting controls on the speaker.

Video: Official Redragon overview of the GS520 RGB Desktop Speakers, demonstrating features and controls.

Maintenance

To ensure the longevity and optimal performance of your Redragon GS520 speakers, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to wipe down the exterior of the speakers. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
  • Dust Removal: Gently use a soft brush or compressed air to remove dust from the speaker grilles.
  • Placement: Place the speakers on a stable, flat surface to prevent accidental falls. Avoid placing them in direct sunlight, near heat sources, or in areas with high humidity.
  • Cable Care: Do not pull on the cables forcefully. Always grasp the plug when disconnecting to prevent damage to the cable or port.

Troubleshooting

If you encounter issues with your Redragon GS520 speakers, refer to the following troubleshooting tips:

ProblemSolution
No sound from speakers
  • Ensure the USB cable is securely connected for power.
  • Verify the 3.5mm audio jack is fully inserted into the audio output port.
  • Check the volume levels on both the speakers and your connected device.
  • Confirm the speakers are powered on (power button LED should be lit).
RGB lights are not working
  • Ensure the speakers are powered on via the USB connection.
  • Lightly tap the touch-control sensor on top of the right speaker to cycle through modes or turn them on.
Sound is distorted or unclear
  • Lower the volume on both the speakers and your connected device.
  • Ensure the audio source is not distorted.
  • Check for any interference from other electronic devices.

Specifications

FeatureDetail
Model NameAnvil (GS520)
Speaker TypeComputer
Connectivity TechnologyUSB (for power), 3.5mm Audio Jack (for sound)
Audio Output ModeStereo (2.0 Channel)
Speaker Maximum Output Power3 Watts
Frequency Response20 KHz
Audio Driver TypeDynamic Driver
Audio Driver Size5 Centimeters
Control MethodTouch (for RGB), Buttons (for Volume/Power)
Product Dimensions3.5"D x 7"W x 4"H
Item Weight0.071 ounces (per speaker)
ColorPink
MaterialAcrylonitrile Butadiene Styrene (ABS)
Compatible DevicesLaptop, Personal Computer, Television, Smartphones

Warranty Information

The Redragon GS520 RGB Desktop Speakers come with a 1-year warranty. For specific terms and conditions, or to initiate a warranty claim, please refer to the official Redragon website or contact their customer support directly.

Support

For further assistance, technical support, or inquiries regarding your Redragon GS520 speakers, please visit the official Redragon website or contact their customer service department. You can often find FAQs, driver downloads, and additional resources on their support pages.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.