GROOVYPETS Smart Automatic Anti-bark Dog Collar User Manual

1. Introduction

Welcome to the user manual for your new GROOVYPETS Smart Automatic Anti-bark Dog Collar. This intelligent device is designed to help manage and reduce excessive barking in dogs through humane and effective methods. Please read this manual thoroughly before use to ensure proper operation and the safety of your pet.

2. Product Overview

2.1 Components

The GROOVYPETS Smart Automatic Anti-bark Dog Collar includes the following components:

• Anti-bark Collar Unit
• Adjustable Nylon Strap
• USB Charging Cable
• Silicone Protective Sleeves (various sizes)
• Test Light Tool
• User Manual

Figure 2.1: Detailed view of the GROOVYPETS Smart Automatic Anti-bark Dog Collar components, highlighting the adjustable strap, buckle, LED display for sensitivity, E-shock probes, sound sensor, USB charging port, and a test indicator.

2.2 Features

This intelligent bark collar offers several key features:

• Automatic Barking Control: Operates without a remote, using sound and vibration to deter barking.
• Adjustable Sensitivity Levels: 5 levels of sensitivity to detect barks, suitable for various dog temperaments.
• Optimized Smart Training Loop: A progressive algorithm that spaces out corrections (beep, vibration, e-shock) to prevent overcorrection, with a 1-minute pause protected mode after 5 triggers.
• Rechargeable Battery: Long-lasting battery providing up to 12 days of use on a single charge.
• IP67 Waterproof Rating: Designed for outdoor activities and water exposure.
• Safety Lock: Ensures maximum protection and prevents overcorrection.
• Comfortable Contact Points: Includes silicone caps for comfort and protection.
• Universal Fit: Suitable for dogs with neck sizes from 6" to 24" and weighing 10lbs to 110lbs.

3. Setup

3.1 Charging the Collar

1. Locate the USB charging port on the collar, usually protected by a rubber plug.
2. Connect the provided USB charging cable to the collar and a suitable USB power source (e.g., computer, wall adapter).
3. The LED indicator lights will show charging status. A full charge typically takes a few hours.
4. Once fully charged, disconnect the cable and ensure the rubber plug is securely re-inserted to maintain waterproof integrity.

Note: Charge the collar fully before first use. Avoid excessive water exposure during charging.

3.2 Attaching the Collar to Your Dog

1. Ensure the collar is turned off before placing it on your dog.
2. Place the collar around your dog's neck, positioning the main unit centrally on the underside of the neck, near the vocal cords.
3. Adjust the strap to ensure a snug fit. You should be able to fit one or two fingers comfortably between the collar and your dog's neck. The contact points must touch the dog's skin.
4. For dogs with long or thick fur, you may need to trim the fur around the contact points to ensure proper skin contact.
5. Attach the appropriate silicone protective sleeves to the contact points for your dog's comfort and safety.

Figure 3.1: Proper placement of the bark collar on a dog's neck, ensuring the unit is centered and contact points are touching the skin.

Figure 3.2: Illustration of how to use the silicone protective sleeves for the contact points, ensuring a safe and comfortable fit for your dog.

4. Operating Instructions

4.1 Powering On/Off

To power on the collar, press and hold the power button (usually located on the side or back of the unit) until the LED indicators light up. To power off, press and hold the power button again until the lights turn off.

4.2 Adjusting Sensitivity Levels

The collar has 5 adjustable sensitivity levels. A higher sensitivity level means the collar will detect barks more easily. To adjust the sensitivity:

1. With the collar powered on, short press the power button.
2. The LED indicators will show the current sensitivity level (e.g., 1 light for level 1, 5 lights for level 5).
3. Continue short pressing the power button to cycle through the sensitivity levels. Select the level appropriate for your dog's barking habits.

Recommendation: Start with a lower sensitivity level and increase it if the collar is not responding to your dog's barks.

4.3 How the Smart Training Loop Works

The collar employs a progressive Smart Training Loop to effectively deter barking without overcorrection:

• First Bark: The collar emits a warning beep.
• Second Bark (within 30 seconds): The collar emits a beep and a low-level vibration (Level 1-2).
• Third Bark (within 30 seconds): The collar emits a beep, vibration, and a low-level e-shock (Level 1-3).
• Subsequent Barks (within 30 seconds, up to 5 triggers): The intensity of the vibration and e-shock may increase progressively.
• 1-Minute Pause Protected Mode: After 5 consecutive triggers within a short period, the collar will enter a 1-minute protected mode, during which it will not activate, preventing overcorrection.
• The cycle resets if no barks are detected for a certain period.

Figure 4.1: Visual representation of the collar's smart training loop, illustrating the progressive correction levels and the safety pause.

4.4 Disabling the E-shock Function

If you prefer to use only beep and vibration corrections, you can disable the e-shock function by covering the metal contact points with the provided silicone caps. This will prevent any static correction while still allowing the collar to deliver audible and vibratory deterrents.

Figure 4.2: Instructions on how to disable the e-shock function using the silicone protective sleeves.

5. Maintenance

• Cleaning: Regularly clean the collar unit and strap with a damp cloth. Ensure the contact points are free of dirt or debris.
• Inspection: Periodically inspect the collar for any signs of wear, damage, or corrosion, especially on the contact points and charging port.
• Storage: When not in use for extended periods, store the collar in a cool, dry place. Ensure it is fully charged before storing.
• Skin Health: Check your dog's neck daily for any signs of irritation, redness, or sores from the collar. If irritation occurs, discontinue use and consult a veterinarian.
• Water Exposure: While the collar is IP67 waterproof, prolonged submersion or exposure to saltwater should be avoided. Always ensure the charging port cover is sealed when near water.

6. Troubleshooting

7. Specifications

8. Warranty and Support

8.1 Warranty Information

This GROOVYPETS Smart Automatic Anti-bark Dog Collar comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

8.2 Customer Support

For any questions, concerns, or technical assistance regarding your GROOVYPETS product, please contact our customer support team. Refer to the contact information provided on the product packaging or the official GROOVYPETS website.

We are committed to providing high-quality products and excellent customer service.