Bluedee BH200 Bluetooth Headphones User Manual

1. Introduction

Thank you for choosing Bluedee BH200 Bluetooth Headphones. These headphones are designed to provide a superior audio experience with advanced features such as Hi-Res Audio, Active Noise Cancelling (ANC), and extended playtime. This manual will guide you through the setup, operation, and maintenance of your new headphones.

Package Contents

Please check the package contents to ensure all items are present:

• 1 x Bluedee Noise Cancelling Headphones
• 1 x USB A to USB C Charging Cable
• 1 x AUX 3.5mm Cable
• 1 x User Manual

2. Safety Information

To ensure safe and proper use of your headphones, please read the following safety guidelines:

• Do not expose the headphones to extreme temperatures, humidity, or corrosive substances.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not disassemble or attempt to repair the headphones yourself. This will void the warranty.
• Clean the headphones with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Prolonged listening at high volume levels may cause hearing damage. Adjust volume to a safe level.
• Keep out of reach of children and pets.

3. Product Overview

Familiarize yourself with the components and controls of your Bluedee BH200 headphones.

Figure 3.1: Front view of the Bluedee BH200 Bluetooth Headphones, showcasing the over-ear design and earcups.

Figure 3.2: Detailed view of the headphone's internal components, highlighting the 40mm large aperture drivers and the Qualcomm chip for Hi-Res Audio support.

Controls and Indicators

The headphones feature intuitive controls for easy operation:

• Power Button: On/Off, Pairing mode.
• Volume Up/Next Track Button: Increase volume, skip to next track.
• Volume Down/Previous Track Button: Decrease volume, go to previous track.
• Multi-function Button (MFB): Play/Pause, Answer/End Call, Activate Voice Assistant.
• ANC Button: Toggle Active Noise Cancellation On/Off.
• LED Indicator: Shows power status, pairing status, and charging status.
• USB-C Charging Port: For charging the headphones.
• 3.5mm Audio Jack: For wired connection.

4. Setup

4.1 Initial Charging

Before first use, fully charge your headphones. A full charge takes approximately 3 hours and provides up to 50 hours of playtime.

• Connect the USB-C charging cable to the charging port on the headphones and the other end to a USB power adapter (not included) or a computer's USB port.
• The LED indicator will show charging status (e.g., red while charging, off when fully charged).

Figure 4.1: The headphones indicating 3 hours for a full charge providing 50 hours of playtime, with a quick charge option.

4.2 Bluetooth Pairing

To connect your headphones to a Bluetooth-enabled device:

1. Ensure the headphones are charged and turned off.
2. Press and hold the Power button for approximately 5 seconds until the LED indicator flashes blue and red alternately, indicating pairing mode.
3. On your device (smartphone, tablet, computer), enable Bluetooth and search for new devices.
4. Select "Bluedee BH200" from the list of available devices.
5. Once connected, the LED indicator will flash blue slowly or turn solid blue (depending on model).

The headphones will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.

5. Operating Instructions

5.1 Power On/Off

• Power On: Press and hold the Power button for 2-3 seconds.
• Power Off: Press and hold the Power button for 3-4 seconds.

5.2 Music Playback

• Play/Pause: Press the MFB once.
• Next Track: Press and hold the Volume Up button.
• Previous Track: Press and hold the Volume Down button.
• Volume Up: Short press the Volume Up button.
• Volume Down: Short press the Volume Down button.

5.3 Call Management

• Answer/End Call: Press the MFB once.
• Reject Call: Press and hold the MFB for 2 seconds.
• Transfer Call (between phone and headphones): During a call, press and hold the MFB for 2 seconds.

5.4 Active Noise Cancellation (ANC)

• Toggle ANC: Press the ANC button once to turn ANC On or Off. The LED indicator will change color (e.g., green for ANC on).

Figure 5.1: The headphones provide an "Acoustic Wonderland" experience through Active Noise Cancelling, allowing focus on music without external distractions.

5.5 Wired Mode

You can use the headphones in wired mode even if the battery is depleted.

• Connect one end of the 3.5mm AUX cable to the headphone's audio jack and the other end to your audio source.
• In wired mode, Bluetooth functions and ANC may be disabled or have limited functionality.

6. Maintenance

6.1 Cleaning

• Wipe the earcups and headband with a soft, dry, lint-free cloth.
• Do not use cleaning sprays, solvents, or abrasives.
• The ear pads are removable for cleaning or replacement. Please contact customer support for replacement ear pads.

Figure 6.1: The headphones feature removable protein leather ear-cups for easy maintenance and replacement.

6.2 Storage

• Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
• When not in use for extended periods, charge the headphones every few months to maintain battery health.
• The headphones are designed with a foldable, rotatable, and retractable memory metal frame for compact storage and durability.

Figure 6.2: The headphones demonstrate super sturdy construction with memory metal, capable of 1000 times repetitive bending, ensuring long-term durability.

7. Troubleshooting

If you encounter any issues with your headphones, please refer to the following common problems and solutions:

If the problem persists, please refer to the Warranty and Support section for further assistance.

8. Specifications

Technical specifications for the Bluedee BH200 Bluetooth Headphones:

9. Warranty and Support

Bluedee is committed to providing high-quality products and excellent customer service. Your Bluedee BH200 headphones come with comprehensive support.

9.1 Warranty Information

The Bluedee BH200 headphones are backed by an 18-month warranty from the date of purchase. This warranty covers manufacturing defects and ensures product quality. Additionally, Bluedee offers Lifetime Product Quality Support.

9.2 Customer Support

For any questions, technical assistance, or warranty claims, please contact Bluedee customer service. We offer:

• 24/7 Quick Reply via Amazon message.
• Hassle-free replacement/refund for eligible issues.
• 7*24 after-sales support.
• Free replacement for certain components like ear pads (contact seller).

You can reach us through the Amazon messaging system or the service address provided in the original product packaging.

Figure 9.1: Bluedee's commitment to customer satisfaction, including comprehensive support and replacement services.