Gens ace G-Tech Adventure 11.4V 4300mAh 60C 3S Lipo Battery User Manual

1. Introduction

Thank you for choosing the Gens ace G-Tech Adventure 11.4V 4300mAh 60C 3S Lipo Battery. This manual provides essential information for the safe and effective use, charging, and maintenance of your battery. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage or injury.

Image 1: Gens ace G-Tech Adventure 11.4V 4300mAh 60C 3S Lipo Battery with XT60 Plug. This image displays the battery's front view, showing the "Adventure HV 11.4V 60C 4300mAh" label and the XT60 connector.

2. Safety Instructions

Lithium Polymer (LiPo) batteries are powerful and require careful handling. Failure to follow these safety guidelines can result in fire, personal injury, and property damage.

• Charging: Always use a LiPo-compatible charger. Never charge unattended. Charge on a non-flammable surface away from combustible materials. Do not charge a damaged or swollen battery.
• Storage: Store batteries in a cool, dry place, away from direct sunlight and extreme temperatures. Store at a storage voltage (typically 3.8V-3.85V per cell). Use a LiPo-safe bag or container.
• Discharge: Do not over-discharge the battery. Stop using the battery if you notice a significant drop in performance or voltage.
• Physical Damage: Do not puncture, drop, or disassemble the battery. If the battery is damaged, discontinue use immediately and dispose of it properly.
• Temperature: Avoid exposing the battery to temperatures above 60°C (140°F) or below 0°C (32°F).
• Disposal: Dispose of LiPo batteries according to local regulations. Never dispose of them in household waste.

3. Product Overview

The Gens ace G-Tech Adventure Lipo Battery features a built-in Smart Chip designed for enhanced safety and convenience. When used with compatible G-Tech Imars Mini or Imars D300 chargers, the battery automatically identifies itself, initiates charging, and stops when fully charged. It can also be charged with regular LiPo chargers, requiring manual setting of charging parameters.

Image 2: Gens ace G-Tech Adventure Lipo Battery. This image provides a slightly angled view of the battery, highlighting the XT60 power connector (yellow) and the balance lead (black connector).

Image 3: Gens ace G-Tech Adventure Lipo Battery. This image shows the battery from a different perspective, emphasizing its compact form factor and the integrated wiring.

Key Features:

• G-Tech Smart Chip for automatic charging with compatible chargers.
• High Voltage (HV) LiPo technology.
• XT60 Plug for reliable power connection.
• Durable construction for RC applications.

4. Setup and Charging

4.1 Initial Inspection

Upon receiving your battery, inspect it for any signs of damage, swelling, or punctures. Do not use the battery if any damage is observed. Contact your retailer for assistance.

4.2 Charging with G-Tech Smart Charger (Recommended)

1. Connect the XT60 plug of the battery to the corresponding port on your G-Tech Imars Mini or Imars D300 charger.
2. Connect the balance lead of the battery to the balance port on the charger.
3. The G-Tech Smart Charger will automatically detect the battery type and parameters, initiating the charging process.
4. The charger will automatically stop when the battery is fully charged.

4.3 Charging with a Regular LiPo Charger

1. Connect the XT60 plug of the battery to the main output port of your LiPo-compatible charger.
2. Connect the balance lead of the battery to the balance port on the charger.
3. Manually set the charger parameters:
   • Battery Type: LiHV (Lithium High Voltage)
   • Cell Count: 3S
   • Charging Current: Do not exceed 1C (4.3A for this 4300mAh battery) for standard charging. Consult your charger's manual for fast charge capabilities if applicable.
4. Start the charging process. Monitor the battery and charger throughout the charge cycle.
5. Disconnect the battery once charging is complete.

5. Operating Instructions

This battery is designed for use in RC models requiring 3S LiHV power with an XT60 connector.

1. Installation: Securely install the battery in your RC model, ensuring it is protected from impacts and vibrations. Ensure proper ventilation.
2. Connection: Connect the XT60 plug of the battery to the XT60 connector on your RC model's Electronic Speed Controller (ESC). Ensure the connection is firm.
3. Usage: Operate your RC model as intended. Monitor battery performance.
4. Disconnection: After use, disconnect the battery from the ESC. Allow the battery to cool down before recharging or storing.
5. Low Voltage Cutoff: Ensure your ESC has a properly configured low voltage cutoff (LVC) for LiPo batteries to prevent over-discharge, which can permanently damage the battery.

6. Maintenance and Storage

6.1 General Care

• Keep the battery clean and free from dirt or moisture.
• Regularly inspect connectors for damage or corrosion.
• Avoid sharp objects or excessive pressure on the battery pack.

6.2 Long-Term Storage

For optimal battery life, store the battery at a "storage charge" voltage, typically 3.8V-3.85V per cell. Most LiPo chargers have a dedicated storage mode. Store in a cool, dry environment, ideally in a fire-resistant LiPo bag or container.

7. Troubleshooting

• Battery Not Charging:
  • Ensure all connections (XT60 and balance lead) are secure.
  • Verify charger settings are correct for LiHV 3S if using a regular charger.
  • Check if the battery is severely over-discharged (below 3.0V per cell), which some chargers may refuse to charge for safety.
• Reduced Run Time/Performance:
  • Battery may be aging or damaged.
  • Ensure proper charging and storage practices are followed.
  • Check for excessive current draw from the RC model.
• Battery Swelling:

  Immediately discontinue use and charging. Swelling indicates internal damage and a potential fire hazard. Safely discharge the battery to 0V and dispose of it according to local regulations.

8. Specifications

9. Warranty and Support

Gens ace products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official Gens ace website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.

For further assistance, please visit: www.gensace.com