1. Introduction
This manual provides essential information for the safe installation, operation, and maintenance of your Hansgrohe AXOR ShowerSolutions Wall-Mounted Shower 250/580 3jet, Model 35283820. Please read these instructions carefully before installation and keep them for future reference.
2. Safety Information
- Installation must be performed by a qualified professional in accordance with local plumbing and building codes.
- Ensure the water supply is turned off before beginning any installation or maintenance work.
- Protect the product from frost.
- Use only genuine Hansgrohe spare parts for repairs.
- Avoid using abrasive cleaners or scouring pads, as these can damage the surface finish.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- Hansgrohe AXOR ShowerSolutions Wall-Mounted Shower 250/580 3jet
- Mounting hardware
- Instruction manual (this document)
- Note: Specific components may vary. Refer to the packaging for a complete list.
4. Setup and Installation
This shower system is designed for wall-mounted, concealed installation within an iBox universal basic set (sold separately). Professional installation is highly recommended.
- Prepare the iBox: Ensure the iBox universal basic set is correctly installed and secured in the wall according to its own instruction manual.
- Connect Water Supply: Connect the hot and cold water lines to the designated inlets on the iBox. Ensure all connections are watertight.
- Mount the Shower Head:
Figure 4.1: The Hansgrohe AXOR ShowerSolutions wall-mounted shower head installed in a contemporary shower space, showcasing its sleek design and water flow.
Attach the shower head unit to the iBox outlet. Secure it firmly using the provided mounting hardware. Ensure the shower head is level and properly aligned.
Figure 4.2: A detailed view of the shower head's spray plate, highlighting the multiple nozzles for different jet types.
- Test for Leaks: Once installation is complete, slowly turn on the main water supply and check all connections for leaks.
Figure 4.3: Dimensional drawing of the shower head, indicating measurements for installation planning. Dimensions are approximately 586mm in length and 258mm in width.
5. Operating Instructions
The Hansgrohe AXOR ShowerSolutions 250/580 3jet offers three distinct spray patterns for a personalized shower experience. The selection of spray patterns is typically controlled by a separate diverter or control unit (not included with this shower head).
- Rain Jet: Provides a full, soft rain spray, ideal for rinsing and relaxation.
- Rainflow Jet: Delivers a powerful, wide cascade of water, perfect for a invigorating shower.
- Mono Jet: A concentrated, single stream of water, suitable for targeted rinsing or massage.
Refer to the instruction manual of your shower control unit for specific details on how to switch between these jet types.
6. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your shower head.
- Cleaning the Surface: Clean the brushed nickel surface with a soft cloth and a mild, non-abrasive cleaning agent specifically designed for bathroom fixtures. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Cleaning the Spray Disc: The spray disc is removable for easy cleaning.
- Carefully detach the spray disc from the shower head.
- Clean any mineral deposits or debris from the nozzles using your fingers or a soft brush.
- Rinse the spray disc thoroughly and reattach it to the shower head, ensuring it clicks securely into place.
- Avoid: Do not use cleaners containing hydrochloric acid, formic acid, chlorine bleach, or acetic acid, as these can cause significant damage.
7. Troubleshooting
If you encounter issues with your shower head, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced water flow | Clogged nozzles or filter | Clean the removable spray disc and check the water inlet filter for debris. |
| Water dripping after shut-off | Residual water in the shower head | This is normal for large shower heads as water drains slowly. If excessive, check for leaks in the system. |
| Uneven spray pattern | Blocked nozzles | Clean the nozzles on the spray disc. |
If the problem persists, contact a qualified plumber or Hansgrohe customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Product Model | 35283820 |
| Shower Head Size | 580 x 260 mm (approx. 66.5 x 39.5 x 39.5 cm overall dimensions) |
| Jet Types | Rain, Rainflow, Mono |
| Flow Rate (Rain jet at 3 bar) | 17 l/min |
| Flow Rate (Mono jet at 3 bar) | 20 l/min |
| Flow Rate (Rainflow at 3 bar) | 17 l/min |
| Spray Disc Surface | Fully chromed |
| Spray Disc Material | Metal |
| Installation Type | Concealed wall-mounted (requires iBox) |
| Connection Size | DN15 |
| Color/Finish | Brushed Nickel |
| Product Weight | 9.61 kg |
9. Warranty and Support
Hansgrohe products are manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Hansgrohe website.
For technical support, spare parts, or service inquiries, please contact Hansgrohe customer service or your local authorized dealer. You can find contact information on the Hansgrohe website: www.hansgrohe.com
