Zendure Powerstation SuperBase 1000M User Manual

1. Introduction

The Zendure SuperBase 1000M is a compact, lightweight, and quiet portable power station designed to provide reliable power on the go or for emergency backup. With a capacity of 1016.16 Wh and a 1000 W output, it is an ideal energy source for various applications.

Key features include:

• Highly compact design, up to 62% smaller than comparable power stations.
• Lightweight, weighing only 8.55 kg for a 1016 Wh capacity.
• Ultra-quiet operation with a fanless design, producing a maximum of 30 dB.
• Fanless design also protects internal electronics from dust and sand.

2. Safety Instructions

Please read all safety instructions carefully before using the SuperBase 1000M. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not disassemble, repair, or modify the unit.
• Do not expose the unit to fire or high temperatures.
• Do not use or store the unit in direct sunlight or in hot environments.
• Keep the unit away from water, moisture, and corrosive substances.
• Ensure proper ventilation during use and charging.
• Keep out of reach of children and pets.
• Use only original or certified accessories.

3. Package Contents

Verify that all items listed below are included in your package:

• Zendure SuperBase 1000M Portable Power Station
• AC Power Adapter
• 12V Car Charging Cable
• User Manual (this document)

4. Product Overview

Familiarize yourself with the various components and ports of your SuperBase 1000M.

Figure 4.1: Front and Top View of SuperBase 1000M. This image displays the main control panel with a digital display, various USB-A and USB-C output ports, DC output ports, and the DC input port. A handle is visible on top for portability.

Figure 4.2: Rear View of SuperBase 1000M. This image shows the two AC output sockets, the AC power button, and the LED light panel with its control button.

Port Descriptions:

• Digital Display: Shows battery level, input/output power, and status indicators.
• USB-C PD Output: 100W Max (1 port)
• USB-A Output: (3 ports)
• DC Input: 12-24V for charging.
• AC Input: 220-240V for charging.
• AC Output: (2 ports) Pure Sine Wave, 1000W Max.
• DC Output: (2 ports)
• LED Light: Integrated light panel for illumination.

5. Setup

Before first use, it is recommended to fully charge your SuperBase 1000M.

1. Unpack: Carefully remove the SuperBase 1000M and all accessories from the packaging.
2. Initial Charge: Connect the provided AC power adapter to the AC input port on the SuperBase 1000M and plug it into a wall outlet. The digital display will show the charging status. Charge until the display indicates 100%.
3. Placement: Place the unit on a stable, flat surface in a well-ventilated area, away from direct sunlight or heat sources.

6. Operating Instructions

6.1 Powering On/Off

• To power on the unit, press and hold the main power button (usually located near the display) for 3 seconds. The display will light up.
• To power off the unit, press and hold the main power button again for 3 seconds. The display will turn off.

6.2 Using AC Outputs

• Ensure the SuperBase 1000M is powered on.
• Press the "AC" button (located near the AC outlets on the rear) to activate the AC output. The AC indicator on the display will illuminate.
• Plug your AC devices into the AC outlets. The total power consumption should not exceed 1000W.
• After use, press the "AC" button again to turn off the AC output to conserve battery.

6.3 Using USB and DC Outputs

• Ensure the SuperBase 1000M is powered on.
• Plug your USB devices into the USB-A or USB-C ports.
• Plug your DC devices into the DC output ports.
• These ports are typically active when the unit is powered on.

6.4 Using the LED Light

• Press the "LED" button (located near the LED panel on the rear) to turn on the LED light.
• Press the "LED" button again to cycle through brightness levels or turn off the light.

7. Charging the SuperBase 1000M

The SuperBase 1000M can be charged using multiple methods:

• AC Wall Outlet: Connect the provided AC power adapter to the AC input port and plug into a standard wall outlet (220-240V).
• Car Charger: Use the provided 12V car charging cable to charge from your vehicle's cigarette lighter port.
• Solar Panels (Optional): The unit supports solar charging via the DC input port. (Solar panels sold separately).

During charging, the digital display will show the input power and current battery percentage. The unit is fully charged when the display shows 100%.

8. Maintenance

• Cleaning: Use a dry, soft cloth to wipe the surface of the unit. Do not use harsh chemicals or abrasive materials.
• Storage: If storing for an extended period, charge the unit to 50-80% every 3-6 months to prolong battery life. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: Avoid fully discharging the battery frequently. For optimal battery health, keep the battery level above 20% when possible.

9. Troubleshooting

10. Specifications

11. Warranty and Support

Zendure provides a limited warranty for the SuperBase 1000M. Please refer to the warranty card included in your package or visit the official Zendure website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or spare parts inquiries, please contact Zendure customer service through their official website or the contact information provided in your product documentation.

Website: www.zendure.com