JULLISON 6-Inch Black 5CCT LED Low Profile Recessed & Surface Mount Disk Light Instruction Manual

Introduction

Thank you for choosing the JULLISON 6-Inch Black 5CCT LED Low Profile Recessed & Surface Mount Disk Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Important Safety Information

• WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Ensure all electrical connections are made correctly and securely.
• Do not modify the fixture in any way. Any modifications may void the warranty and create safety hazards.
• Suitable for use in dry, damp, and wet locations.
• Operating voltage: 120 Volts.

Package Contents

Each package contains:

• JULLISON 6-Inch LED Surface Mount Ceiling Disk Light (Quantity as per purchase, e.g., 8 units)
• Installation hardware (screws, wire nuts)
• Instruction Manual

Image: Overview of the JULLISON 6-inch Black 5CCT LED Disk Lights, showing multiple units.

Product Features

• 5CCT Selectable: Choose from 2700K (Warm White), 3000K (Soft White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight) color temperatures.
• Low Profile Design: At only 1.26 inches in height, these lights are suitable for tight spaces and low ceilings.
• Energy Efficient: 15 Watts, providing 900 Lumens, equivalent to a 75-watt incandescent bulb, saving over 80% energy.
• Smooth Dimming: Compatible with most Triac/ELV wall dimmers, dimmable down to 5%.
• Driverless Technology: Integrated DOB (Driver On Board) technology for a compact design.
• Durable Construction: Made from metal and plastic, ETL certified for safety.
• Wet Location Rated: Suitable for use in bathrooms, showers, and outdoor covered areas.

Image: Visual representation of product features and certifications.

Setup and Installation

This fixture is designed for both recessed and surface mount applications, compatible with 4-inch junction boxes and fire-rated boxes.

Tools Required (Not Included):

• Screwdriver
• Wire Strippers
• Electrical Tape (optional)

Installation Steps:

1. Turn Off Power: Before starting any electrical work, ensure the power supply to the installation area is turned off at the circuit breaker or fuse box.
2. Prepare Junction Box: Ensure your junction box is securely mounted and accessible. The fixture is compatible with various 4-inch junction boxes (shallow pan, octagon metal, square metal, square plastic, round plastic, fire rated).
3. Select Color Temperature: Before mounting, locate the 5CCT selector switch on the back of the fixture. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch. This cannot be changed easily after installation.
4. Wire Connections: Connect the fixture's wires to the corresponding wires in the junction box using wire nuts:
   • Black wire (fixture) to Black wire (supply) - Live
   • White wire (fixture) to White wire (supply) - Neutral
   • Green/Bare Copper wire (fixture) to Green/Bare Copper wire (supply) - Ground
   Ensure connections are secure.
5. Mount the Fixture: Align the fixture with the mounting holes on the junction box. Secure the fixture to the junction box using the provided screws.
6. Restore Power: Once the fixture is securely mounted and all connections are checked, restore power at the circuit breaker.

Image: Step-by-step visual guide for connecting wires and mounting the light.

Image: Examples of compatible junction boxes for installation.

Operating Instructions

Once installed and power is restored, the JULLISON LED Disk Light operates like any standard lighting fixture controlled by a wall switch. If connected to a compatible dimmer switch, you can adjust the brightness level.

Color Temperature Selection (5CCT)

The JULLISON LED Disk Light features a 5CCT selectable switch, allowing you to choose from five distinct color temperatures:

• 2700K: Warm White, similar to traditional incandescent lighting.
• 3000K: Soft White, a slightly brighter warm light.
• 3500K: Neutral White, a balanced white light.
• 4000K: Cool White, a crisp, bright white light.
• 5000K: Daylight, a very bright, bluish-white light.

Important: The CCT selection switch is located on the back of the fixture and must be set before installation. To change the CCT after installation, you will need to remove the fixture from its mounting.

Image: Visual demonstration of different color temperatures and the selector switch.

Dimming Compatibility

This LED disk light is designed for smooth dimming performance with most Triac/ELV type wall dimmers, allowing adjustment from 100% down to 5% brightness. For optimal performance, refer to the dimmer compatibility list below. Using incompatible dimmers may result in flickering or reduced performance.

Image: Dimmer compatibility chart for the JULLISON LED disk light.

Recommended Dimmers:

Maintenance

• Cleaning: Ensure power is off before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
• No User-Serviceable Parts: The LED components are integrated and not user-replaceable. Do not attempt to open or repair the fixture.

Troubleshooting

Specifications

Image: Product dimensions and key technical specifications.

Warranty and Support

This JULLISON LED Disk Light comes with a 5 Years Limited Warranty. For any questions regarding installation, operation, or warranty claims, please contact JULLISON LED customer support.

Contact information can typically be found on the product packaging or the official JULLISON website.