Introduction
The RAINPOINT Sprinkler Timer 2 Outlet is designed to automate your garden and lawn watering needs. This V2 Metal model features a durable brass inlet and offers extensive programming options for two independent watering zones. With its user-friendly interface, you can easily customize watering schedules, utilize manual modes, and benefit from a low battery alert system to prevent water leakage.
Setup
1. Package Contents
- RAINPOINT Sprinkler Timer 2 Outlet (Metal V2)
- User Manual
- PTFE Tape and Gasket (for secure connections)
2. Battery Installation
Locate the battery compartment on the back of the timer. Open the cover and insert two AA alkaline batteries (not included), ensuring correct polarity. Close the battery cover securely to maintain the waterproof seal.
Image: Rear view of the timer, indicating the battery compartment.
3. Attaching the Timer to Faucet
Thread the brass inlet of the timer onto your outdoor faucet. Hand-tighten until secure. Use the provided PTFE tape on the faucet threads for a leak-proof connection. Ensure the timer is vertically aligned for optimal performance.
Image: The sprinkler timer connected to an outdoor faucet, highlighting the brass inlet.
Connect your garden hoses or drip irrigation lines to the two outlets at the bottom of the timer. Each outlet can be independently controlled.
Image: Front view of the RAINPOINT Sprinkler Timer showing the two hose outlets.
Video: Water Timer 2 Zone with Brass Inlet
Video Description: This video demonstrates the physical installation of the RAINPOINT Sprinkler Timer, highlighting its two zones and brass inlet.
Operating Instructions
1. Setting the Clock
Turn the dial to 'SET CLOCK'. Use the '+' and '-' buttons to adjust the current time. Press 'OK' to confirm and move to the next setting.
2. Programming Automatic Watering
The timer supports up to 38 programs across its two zones. Each zone (Zone 1 and Zone 2) can have its own customized watering frequency, start time, and duration.
- Set Start Time: Turn the dial to 'START TIME'. Select Zone 1 or Zone 2 using the 'ZONE' button. Use '+' and '-' to set the desired start time for watering. Press 'OK'.
- Set How Long: Turn the dial to 'HOW LONG'. Select the zone. Use '+' and '-' to set the watering duration from 1 minute to 3 hours 59 minutes. Press 'OK'.
- Set How Often: Turn the dial to 'HOW OFTEN'. Select the zone. Use '+' and '-' to set the frequency (e.g., every 1-12 hours, or every 1-7 days). Press 'OK'.
Image: Illustration of the dual-zone technology with separate cycle and interval modes.
Image: The timer's display showing options for setting watering frequency in hours or days.
3. Manual Watering Mode
The timer offers three separate manual/auto modes: Zone 1, Zone 2, or Both Zones. To activate manual watering, turn the dial to 'ON'. Press and hold the 'OK/MANUAL' button until 'MANUAL' appears on the display. Use the 'ZONE' button to select the desired zone(s). The manual watering time can be set from 1 minute to 8 hours.
Image: A user demonstrating manual watering with the timer, showing options for garden manual watering and lawn automatic watering.
4. Rain Delay Function
To temporarily pause watering due to rain, turn the dial to 'ON'. Press the 'DELAY +' button. Each press will increase the delay by 24 hours, up to 72 hours. The timer will resume its programmed schedule after the delay period ends.
Image: The timer displaying a low power alert, with the rain delay function highlighted.
Video: Brass Water Timer 2 Outlets
Video Description: This video provides a brief overview of the RAINPOINT 2-outlet water timer, demonstrating its programming dial and display.
Maintenance
1. Low Battery Alert
When the battery level drops below 5%, a low-battery alert will appear on the display. The valve will automatically shut off to prevent water leakage. Replace batteries promptly to ensure continuous operation.
2. Cleaning the Filter
Periodically check the filter screen located in the brass inlet for debris. Remove the timer from the faucet, carefully pull out the filter, rinse it under running water, and reinsert it. This helps maintain optimal water flow and prevents clogging.
3. Winterization
Before the first frost, disconnect the timer from the faucet and hoses. Drain any remaining water from the unit. Store the timer indoors in a dry, frost-free location to prevent damage from freezing temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water flow | Low battery; clogged filter; faucet off; incorrect programming. | Replace batteries; clean filter; open faucet; check programming. |
| Water leakage | Loose connection; damaged gasket/tape; cracked housing. | Tighten connections; replace gasket/tape; contact support if damaged. |
| Incorrect timing | Clock not set; programming error. | Set clock correctly; re-program watering schedule. |
| Display not working | Dead batteries; unit malfunction. | Replace batteries; contact customer support. |
For further assistance, please refer to the detailed User Manual PDF or contact RAINPOINT customer support.
Specifications
- Model Number: TCITV205NH-V2-C
- Material: Metal
- Color: Blue-grey
- Product Dimensions: 5.4"D x 3.2"W x 5.4"H
- Item Weight: 1.17 pounds (0.53 Kilograms)
- Number of Settings: 38 programs
- Manual Watering Time: 1 minute to 8 hours
- Automatic Watering Time: 1 minute to 4 hours
- Frequency Options: Every 1-12 hours, or every 1-7 days
- Rain Delay: 24/48/72 hours
Warranty & Support
For detailed warranty information and customer support, please refer to the official RAINPOINT resources.
- User Guide (PDF): Download User Guide
- User Manual (PDF): Download User Manual
- Visit the RAINPOINT Store: RAINPOINT Official Store
