Introduction
This manual provides essential information for the proper use and care of your EverNice plastic bobbins and storage box. These bobbins are designed for compatibility with specific PFAFF sewing machine models, ensuring smooth and efficient sewing operations. Please read these instructions carefully before use.
Product Compatibility
The EverNice plastic bobbins are compatible with the following PFAFF sewing machine models:
- Hobby Series: 1020, 1022, 1030, 1032, 1040, 1042, 521
- Ambition Series: 1.0, 1.5, essential, 155, 155 Anniversary Edition
- Passport Series: 2.0, 3.0
- Creative Series: 1.5
- Quilt Ambition Series: 2.0
- Smarter Series: 155
- Other Models: 139, 140S, 204, 205, 206, 207, 208, 209, 210, 211, 260C, 260S, 4240, 4250, 4260, 541, 645, 721, 741
Always verify your sewing machine's manual for specific bobbin type recommendations.
Product Features and Dimensions
This product includes 25 clear plastic bobbins and a dedicated storage box. The bobbins are designed to meet the specifications required for the listed PFAFF sewing machines.
This image illustrates the precise measurements of the plastic bobbins. Each bobbin has a diameter of 20.6 mm and a height of 11.6 mm, ensuring compatibility with specified sewing machine models.
Setup: Winding a Bobbin
Before sewing, thread must be wound onto a bobbin. Refer to your sewing machine's instruction manual for specific bobbin winding procedures, as steps may vary slightly by model. General steps include:
- Place an empty EverNice plastic bobbin onto the bobbin winder spindle of your sewing machine.
- Guide the thread from the spool pin through the tension disc for bobbin winding.
- Secure the thread end to the bobbin by wrapping it a few times.
- Engage the bobbin winder and start the machine. The bobbin will fill with thread.
- Once the bobbin is full, stop the machine, cut the thread, and remove the wound bobbin.
Operating: Inserting the Bobbin
Proper bobbin insertion is crucial for correct stitch formation. Consult your PFAFF sewing machine's manual for detailed instructions specific to its bobbin case type (e.g., drop-in or front-loading). Common steps are:
- Turn off the sewing machine for safety.
- Open the bobbin cover or remove the bobbin case.
- Insert the wound EverNice bobbin into the bobbin case or bobbin compartment, ensuring the thread unwinds in the correct direction (usually counter-clockwise for drop-in bobbins, or as indicated by your machine).
- Guide the thread through the tension spring or slot in the bobbin case.
- Close the bobbin cover or reinsert the bobbin case.
- Bring the bobbin thread up through the needle plate hole by lowering and raising the needle manually.
Care and Maintenance
To ensure the longevity of your bobbins and optimal sewing performance:
- Storage: Always store bobbins in the provided plastic box to prevent dust accumulation and tangling of threads.
- Cleaning: Periodically inspect bobbins for lint or thread residue. Clean with a soft brush if necessary.
- Inspection: Before each use, check bobbins for any cracks or damage. Damaged bobbins can affect stitch quality and potentially harm your machine.
- Avoid Overfilling: Do not overfill bobbins, as this can cause tension issues and damage the bobbin or machine.
Troubleshooting
If you encounter issues related to bobbin function, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Thread tangling/nesting on underside | Incorrect bobbin insertion or tension. | Re-insert bobbin, ensuring thread is correctly seated in tension spring. Check upper thread tension. |
| Bobbin not winding evenly | Thread path incorrect or bobbin winder tension issue. | Ensure thread is guided correctly through all winding points. Consult machine manual for winder adjustment. |
| Bobbin does not fit in machine | Incorrect bobbin type for your machine model. | Verify your machine's specific bobbin requirements against the listed compatible models. |
| Skipped stitches | Bobbin thread tension incorrect or bobbin damaged. | Check bobbin for damage. Adjust bobbin tension if your machine allows (refer to manual). |
Specifications
- Product Type: Plastic Bobbins with Storage Box
- Quantity: 25 bobbins per box
- Material: Clear Plastic
- Bobbin Diameter: 20.6 mm (approximately 0.81 inches)
- Bobbin Height: 11.6 mm (approximately 0.46 inches)
- Model Number: 4164758-01
- Product Dimensions (Box): 3.94 x 3.94 x 3.94 inches
Warranty and Support
Specific warranty information for this product is not provided in the available data. For any product-related inquiries or support, please contact the EverNice customer service through the retailer where the product was purchased.