Product Overview
This magnetic replacement charger is specifically designed for various smartwatch models, including TOOBUR IDW13 1.8", TEMINICE IDW13 1.8", VRPEFIT IDW13 1.8", Konitee IDW13 1.8", Gydom IDW13 1.8", Faweio IDW13 1.8", TOOBUR IDW17 2.01", and IDW17 watches. It features a magnetic connection for secure charging and includes built-in protection mechanisms to ensure safe and efficient power delivery.
Image: A smartwatch connected to the magnetic charging cable, indicating a successful charge.
Image: Close-up view of the magnetic charging pins and the standard USB-A connector.
Image: Infographic highlighting key features: Wide Compatibility, USB Connector, Fast Charging, Strongly Magnetic, and Long Lasting.
Setup and Connection
To begin charging your smartwatch, follow these simple steps:
- Connect the USB-A End: Insert the standard USB-A connector of the charging cable into a compatible power source. This can be a USB wall adapter, a computer's USB port, a laptop's USB port, or a power bank.
- Connect the Magnetic End: Align the magnetic charging pins of the cable with the charging contacts on the back of your smartwatch. The magnets will automatically snap into place, ensuring a secure connection.
- Verify Connection: Ensure the magnetic connection is firm and the smartwatch indicates that it is charging (e.g., a charging icon or battery percentage increase). If the magnets repel, adjust the orientation of the charging head until they attract.
Image: Demonstrates various power sources for charging, including a power bank, wall charger, computer, and laptop.
Image: A smartwatch being charged by connecting the cable to a laptop's USB port.
Operating Instructions
Once connected, the charger will automatically begin charging your smartwatch. The charging process is designed to be efficient and safe.
- Charging Time: A full charge typically takes approximately 2.5 hours when using a 1A output current power source.
- Safety Features: The charger incorporates a built-in short-circuit protection IC. This intelligent circuit automatically cuts off power in case of overvoltage or overcurrent, preventing damage to your device. It also maintains safety if the charger remains plugged in after your device is fully charged.
- Battery Life: With a full charge, your smartwatch can achieve up to 30 days of standby time or 7 days of typical usage time, depending on the specific smartwatch model and usage patterns.
Image: An illustration showing that a full charge takes 2.5 hours with a 1A output current.
Image: Visual representation of battery life: 30 days standby and 7 days usage time.
Image: Icons representing the charger's protection features: Over-Current Protection, Over-Voltage Protection, Over-Charging Protection, and High Temperature Protection.
Maintenance and Care
To ensure the longevity and optimal performance of your charging cable, please observe the following guidelines:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Its flexible PVC cable design makes it easy to roll and convenient for storage.
- Cleaning: Gently wipe the cable and magnetic contacts with a soft, dry cloth to remove any dust or debris. Do not use liquid cleaners or abrasive materials.
- Handling: Avoid sharp bends or excessive pulling on the cable, especially near the connectors, to prevent internal wire damage. The cable is designed for durability, having undergone over 20,000 bending tests.
- Material Quality: The cable features a pure copper probe for rapid and stable conduction, and the connectors are made from durable ABS+PC material.
Image: Diagram illustrating the cable's components: Pure Copper Probe for rapid conduction, ABS+PC for durability, and Flexible PVC Cable for easy storage. Cable length is 3.3 feet / 1 meter.
Image: An illustration indicating the cable has passed over 20,000 bending tests, demonstrating its durability.
Troubleshooting
If you encounter issues with your charger, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Smartwatch not charging. |
|
| Slow charging. |
|
| Charger feels warm. |
|
Image: Visual guide demonstrating correct and incorrect magnetic charging connections. Shows that if magnets repel, the device will not charge, but if they attract, it will charge correctly.
Specifications
| Feature | Detail |
|---|---|
| Brand | Lamshaw |
| Connectivity Technology | USB |
| Connector Type | USB |
| Compatible Devices | TOOBUR IDW13 1.8", TEMINICE IDW13 1.8", VRPEFIT IDW13 1.8", Konitee IDW13 1.8", Gydom IDW13 1.8", Faweio IDW13 1.8", TOOBUR IDW17 2.01", IDW17 Watch |
| Special Feature | Magnetic, Short-circuit Protection IC (Overvoltage, Overcurrent Protection) |
| Color | Black |
| Input Voltage | 5 Volts |
| Cable Length | Approx. 3.3 feet / 1 meter |
| Item Weight | 0.317 ounces |
| Model Number | 1 |
Warranty and Support
For any questions, concerns, or technical assistance regarding your Lamshaw magnetic replacement charger, please contact the manufacturer or seller directly through the platform where the product was purchased. Please refer to your purchase documentation for specific warranty terms and conditions, as these may vary.
We are committed to providing high-quality products and support to ensure your satisfaction.