CAPHAUS FLT-CH71N01-RUOK

CAPHAUS 71-Inch Narrow Console Table (Model FLT-CH71N01-RUOK) Instruction Manual

Model: FLT-CH71N01-RUOK | Brand: CAPHAUS

CAPHAUS 71-Inch Narrow Console Table in Rustic Oak finish with black metal frame, displaying decorative items
Figure 1.0: Overview of the CAPHAUS 71-Inch Narrow Console Table.

1. Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

  • Caution: Sharp edges may be present. Handle components with care.
  • Do not exceed the maximum weight recommendation of 100 lbs (45.36 kg) for the tabletop.
  • Ensure the table is stable and not placed on uneven surfaces to prevent tipping.
  • Keep small parts away from children during assembly.
  • Periodically check all connections to ensure they remain tight.

2. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

  • A. Tabletop (1)
  • B. Left Frame Leg (1)
  • C. Right Frame Leg (1)
  • D. Connecting Bar (1)
  • E. Adjustable Leveling Feet (4)
  • F. Screws and Allen Wrench (Quantity as per diagram)

Note: Tools recommended for assembly include a screwdriver (not included). An Allen wrench is typically provided.

3. Assembly Instructions

Assembly is designed to be straightforward. It is recommended for one person to assemble this unit. Please follow these steps:

  1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
  2. Attach Leveling Feet: Screw the four adjustable leveling feet (E) into the bottom of the frame legs (B and C). Do not overtighten.
  3. Connect Frame Legs: Attach the connecting bar (D) between the left frame leg (B) and the right frame leg (C) using the provided screws. Ensure all connections are secure but do not fully tighten yet.
  4. Attach Tabletop: Carefully place the tabletop (A) upside down on your soft surface. Align the assembled frame (B, C, D) with the pre-drilled holes on the underside of the tabletop. Secure the frame to the tabletop using the remaining screws.
  5. Final Tightening and Leveling: Once all screws are in place, gradually tighten all screws evenly. Turn the table upright. Adjust the leveling feet (E) as needed to ensure the table is stable and does not wobble on uneven floors.
Diagram showing reinforced structure and adjustable leveling foot
Figure 3.1: Illustration of reinforced structure and adjustable leveling feet for stability.
CAPHAUS console table in an entryway with a round mirror and plants
Figure 3.2: The assembled console table positioned in an entryway, demonstrating its narrow profile and decorative use.

4. Usage Guidelines

The CAPHAUS Narrow Console Table is designed for versatile use in various indoor settings.

  • Placement: Ideal for entryways, hallways, living rooms (behind sofas), or as a plant display table. Its narrow design fits well in confined spaces.
  • Weight Capacity: Do not place items exceeding 100 lbs (45.36 kg) on the tabletop. Distribute weight evenly.
  • Stability: Always ensure the table is stable before placing items on it. Adjust leveling feet if necessary.
  • Indoor Use: This table is intended for indoor use only. Avoid exposure to direct sunlight, extreme temperatures, or high humidity.
Collage showing the console table used in a porch, balcony, living room, and kitchen
Figure 4.1: Examples of the console table's versatile placement in different home environments such as an entryway, behind a sofa, or as a display unit.
Diagram showing the dimensions of the sofa table: 70.9 inches wide, 7.9 inches deep, 31.5 inches high, with a 100 lbs weight capacity
Figure 4.2: Detailed dimensions of the console table, highlighting its narrow depth and overall length, along with its maximum weight capacity.

5. Care and Maintenance

Proper care will ensure the longevity and appearance of your console table.

  • Cleaning: Wipe the tabletop and metal frame with a damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
  • Spills: Clean spills immediately to prevent staining, especially on the rustic oak finish.
  • Heat and Moisture: Use coasters under hot items or drinks to protect the surface.
  • Inspection: Periodically check all screws and connections and tighten if necessary to maintain structural integrity.
Close-up of a hand wiping the rustic oak tabletop with a damp cloth
Figure 5.1: Demonstrates the ease of cleaning the tabletop with a damp cloth.

6. Troubleshooting

If you encounter any issues with your console table, refer to the following common solutions:

ProblemPossible CauseSolution
Table wobblesUneven floor or loose leveling feet.Adjust the adjustable leveling feet until the table is stable. Ensure all screws are tightened.
Parts do not align during assemblyIncorrect orientation of parts or screws not fully loosened.Review the assembly diagrams. Loosen all screws slightly, adjust parts, then retighten evenly.
Missing parts or damaged componentsManufacturing defect or shipping damage.Do not proceed with assembly. Contact CAPHAUS customer support immediately for assistance.

7. Product Specifications

BrandCAPHAUS
Model NumberFLT-CH71N01-RUOK@CH
Product Dimensions (D x W x H)7.9"D x 70.9"W x 31.5"H (20cm D x 180cm W x 80cm H)
Item Weight23.1 Pounds (10.48 kg)
Maximum Weight Recommendation100 lbs (45.36 kg)
ColorRustic Oak
Frame Material TypeMetal
Top Material TypeEngineered Wood (P2 Grade)
Product Care InstructionsWipe with Damp Cloth
Assembly RequiredYes (Recommended 1 person)
Diagram illustrating formaldehyde emission levels for different wood grades, highlighting P2 grade as safe and reliable
Figure 7.1: Information on the P2 grade engineered wood board, indicating low formaldehyde emission for safety and reliability.

8. Warranty and Customer Support

CAPHAUS is committed to providing quality products and customer satisfaction.

  • Warranty Information: For details regarding product warranty, please contact CAPHAUS customer support directly.
  • Contact Support: If you have any questions, require assistance with assembly, or encounter any issues with your product, please do not hesitate to contact the seller or CAPHAUS customer support. They are ready to assist you.
  • Feedback: Your feedback is valuable. If you are satisfied with your product, consider sharing your experience.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.