PINDOWS Women Analog Quartz Wrist Watch Instruction Manual

Product Overview

The PINDOWS Analog Quartz Wrist Watch is designed for young women, students, and medical professionals, offering an easy-to-read, waterproof, and unisex design. It features an imported Japanese movement for accurate timekeeping, ensuring precision with a rate of less than 1 second per day.

The watch boasts a luminous dial with 12/24 hour display, including luminous hour and minute hands and a striking red second hand, making it ideal for accurate pulse readings. Its high-quality construction includes a super soft, breathable 100% silicone band that is easy to clean, and a high-hardness mineral tempered glass mirror for strong transparency, abrasion, and scratch resistance.

This watch is waterproof to a depth of 30 meters (99 feet), generally withstanding splashing or brief submersion in water, but it is not suitable for swimming. With a 38mm case, it fits a wide range of wrist sizes from 5 inches (127mm) to 7.2 inches (183mm), making it suitable for daily work, exercise, travel, and various other occasions.

Setup Guide

Setting the Time

To set the time on your PINDOWS watch, gently pull out the crown (the small knob on the side of the watch case). Once pulled out, rotate the crown clockwise or counter-clockwise until the hour and minute hands indicate the correct time. After setting, push the crown back in firmly to ensure the watch is sealed and to start the movement.

Operating Your Watch

Luminous Dial Functionality

The watch features a luminous dial and hands that glow in low-light conditions. This luminescence is achieved by absorbing light from the environment. Exposure to natural light (sunlight) or artificial light (fluorescent, incandescent, office lighting) will charge the luminous elements, allowing them to glow in the dark. The duration and intensity of the glow depend on the amount and intensity of light absorbed.

Water Resistance

Your PINDOWS watch is rated for 30 meters (99 feet) of water resistance. This means it is suitable for daily use and can withstand splashes, rain, and brief immersion in water, such as during hand washing or cold showers. It is important to note that this watch is not designed for swimming, diving, or prolonged submersion in water. Avoid operating the crown or buttons when the watch is wet to prevent water ingress.

Official Product Video: Introduction to Nurse Watches

This video provides an introduction to the PINDOWS nurse watch, highlighting its features such as the metal case, stainless steel bottom cover, and luminous dial. It also demonstrates the 30M water resistance and shows various color options available.

Care and Maintenance

Silicone Band Care

The ultra-soft, high-tensile, and hypoallergenic silicone band is designed for comfort and durability. To clean the band, simply wipe it with water or alcohol. Avoid harsh chemicals that may damage the material. The band also features a tool-free strap replacement mechanism for easy customization.

Battery Replacement

The watch uses a Japan imported movement and battery. When the battery needs replacement, it is recommended to take the watch to a professional watchmaker to ensure proper handling and to maintain its water resistance.

General Cleaning

For general cleaning of the watch case and crystal, use a soft, dry cloth. If necessary, a slightly damp cloth can be used, but ensure the watch is completely dry afterward, especially if it has been exposed to water.

Troubleshooting

• Watch Not Running:

  Ensure the crown is fully pushed in. If the watch still does not run, the battery may need to be replaced. Refer to the "Battery Replacement" section.

• Inaccurate Timekeeping:

  If the watch is consistently fast or slow, it may require adjustment or servicing by a professional watchmaker.

• Condensation Under Crystal:

  If you notice condensation inside the watch, it indicates a potential breach in the water resistance. Stop using the watch immediately and take it to a professional for inspection and repair to prevent further damage.

• Strap Discomfort or Irritation:

  Although the silicone band is hypoallergenic, if irritation occurs, clean the band thoroughly. If the issue persists, discontinue use and consult a dermatologist.

Product Specifications

Warranty and Support

For any questions regarding your PINDOWS watch, including warranty information, repairs, or general support, please contact PINDOWS customer service directly. Refer to the product packaging or the official PINDOWS website for the most up-to-date contact details and warranty terms.