TOREVSIOR 2-in-1 Toddler Swing & Jumper Instruction Manual

1. Important Safety Information

Please read and understand all instructions before assembly and use of the TOREVSIOR 2-in-1 Toddler Swing & Jumper. Failure to follow these instructions may result in serious injury.

• Age and Weight Limits: Suitable for children aged 6 months to 10 years. Maximum weight limit is 200 lbs (90 kg).
• Adult Supervision: Always supervise children while they are using the swing or jumper. Never leave a child unattended.
• Proper Assembly: Ensure all parts are correctly assembled and securely fastened before each use. Refer to the assembly section for detailed steps.
• Placement: For outdoor use, place the swing set on a level surface, at least 6 feet (1.8 meters) away from any structures or obstacles. For indoor use, ensure adequate space and a stable, non-slip surface.
• Inspection: Regularly inspect the swing set for loose parts, worn ropes, damaged components, or sharp edges. Discontinue use if any damage is found and replace parts immediately.
• Safety Belt: Always secure the child with the provided safety belt in both swing and jumper modes.
• Foot Pads: The swing frame is equipped with anti-slip foot pads to enhance stability and protect floors.

2. Package Contents

Verify that all components are present before beginning assembly:

• Metal Frame Components (yellow and blue poles)
• Swing Seat (blue, yellow, and red parts)
• Jumper Harness (blue fabric with red hanger)
• Heavy-Duty Ropes for Swing
• Spring and Chain for Jumper
• Heavy-Duty Carabiners and Hooks
• High-Quality Screws and Fasteners
• Anti-Slip Plastic Foot Covers (red)
• Assembly Tools (basic spanner and screwdriver may be included, but personal tools are recommended for better tightening)

3. Setup and Assembly

Assembly typically takes approximately 30 minutes. A screwdriver is required for some steps.

1. Assemble the Frame: Connect the yellow and blue metal poles to form the A-frame structure. Ensure all connections are secure with the provided screws. The triangular structure enhances stability.
2. Attach Foot Covers: Slide the red anti-slip plastic foot covers onto the bottom of each leg. These protect your floors and provide grip.
3. Prepare Swing/Jumper Attachment: The top bar of the frame has attachment points for both the swing and the jumper.

Image: The foldable frame design, highlighting heavy-duty carabiners, high-quality screws, and anti-slip plastic foot covers.

Image: Close-up of the frame's features, including the foldable design for portability and space-saving, heavy-duty carabiners, secure screws, and anti-slip foot covers.

For a visual guide on assembly and switching between modes, please refer to the video below:

4. Operation

4.1. Swing Mode

1. Attach the Swing Seat: Use the heavy-duty carabiners to securely attach the swing ropes to the frame's attachment points.
2. Adjust the Seat: The swing seat is designed to adapt to different age groups. The red detachable design and yellow part can be removed to convert it from a full bucket seat for infants (6-36 months) to a backrest seat for toddlers (3-6 years), and finally to a flat swing for older children (above 6 years up to 10 years).
3. Secure the Child: Place the child in the swing seat and fasten the adjustable safety belt. Ensure a snug but comfortable fit.
4. Supervise Swinging: Gently push the swing. Always maintain a safe distance and ensure the child's hands and feet are clear of the frame.

Image: The swing seat configured for different age groups, showing a baby in a full bucket seat, a toddler in a backrest seat, and an older child on a flat swing.

Image: Detailed view of the swing seat features, including the detachable front bar, adjustable safety belt, durable plastic construction, and strong ropes.

4.2. Jumper Mode

1. Remove Swing Seat: Unclip the swing seat from the frame.
2. Attach Jumper Harness: Hook the jumper harness (with its spring and chain) to the central attachment point on the frame. Ensure the chain is securely fastened and the spring is covered by its protective fabric.
3. Adjust Height: Adjust the chain length to ensure the child's feet can comfortably touch the ground or a mat, allowing for bouncing motion.
4. Place Child in Harness: Carefully place the child into the jumper harness. Fasten the adjustable safety belt and ensure the harness fits snugly around the child's torso and legs.
5. Supervise Jumping: Encourage the child to bounce. Always stay close to prevent falls or misuse.

Image: The jumper setup, showing the anti-pinch design, the high-quality spring for bouncing, the adjustable safety belt, and the soft, comfortable fabric of the harness.

5. Maintenance

• Cleaning: Wipe down metal and plastic parts with a damp cloth and mild soap. Rinse thoroughly and dry completely. Do not use abrasive cleaners.
• Fabric Care: The jumper harness fabric can be hand-washed with mild detergent and air-dried.
• Regular Inspection: Before each use, check all nuts, bolts, and screws for tightness. Inspect ropes, chains, and harnesses for wear, fraying, or damage. Ensure anti-slip foot pads are intact.
• Storage: When not in use, especially during inclement weather, the swing set can be easily folded and stored against a wall or in a dry area to prolong its lifespan.

6. Troubleshooting

• Swing/Jumper feels unstable:
  • Ensure all frame connections are tightened.
  • Verify the swing set is on a level surface.
  • Check if anti-slip foot pads are properly installed and not worn.
• Difficulty attaching/detaching swing/jumper:
  • Ensure carabiners are fully open and aligned with attachment points.
  • For swing seat conversion, ensure the red and yellow parts are correctly aligned for removal or reattachment.
• Child not comfortable in jumper:
  • Adjust the height of the jumper chain to ensure feet can touch the ground.
  • Adjust the harness straps for a snug but comfortable fit.
  • Ensure the child is wearing appropriate clothing or shoes if using outdoors on rough surfaces.

7. Specifications

Image: Visual representation of the swing set's dimensions (depth, width, height), the triangular structure for stability, and the stated weight limit.

8. Warranty and Support

TOREVSIOR is committed to customer satisfaction. If you encounter any issues or have questions regarding your 2-in-1 Toddler Swing & Jumper, please contact our customer service team. We aim to provide a satisfactory response within 24 hours.

For specific warranty details, please refer to the product packaging or contact the manufacturer directly.