LIGE Magnetic Charging Cable User Manual

1. Introduction

This manual provides essential information for the proper use and care of your LIGE Magnetic Charging Cable. This cable is designed as a replacement or spare for charging specific LIGE smartwatches, ensuring a reliable power connection.

The LIGE Magnetic Charging Cable is compatible with LIGE Smartwatch models ST9, 1829, 1830, 1821, 1825, 1826, 1842, 351, 352, 298, and 326. It features a magnetic connector for easy and secure attachment to your smartwatch and a standard USB-A connector for power input.

Figure 1: Overview of the LIGE Magnetic Charging Cable. This image displays the full length of the black charging cable, featuring a standard USB-A plug on one end and a magnetic two-pin charging connector on the other.

2. Setup

Follow these steps to set up your LIGE Magnetic Charging Cable for use:

Connect to Power Source: Insert the USB-A end of the charging cable into a compatible USB power adapter (e.g., wall charger, power bank), a computer's USB port, or any other standard USB power outlet. Ensure the power source is active.
Prepare Smartwatch: Locate the charging contacts on the back of your LIGE smartwatch. Ensure they are clean and free of dust or debris.
Attach Magnetic Connector: Carefully align the magnetic charging end of the cable with the charging contacts on your smartwatch. The magnets will help snap the connector into place. Ensure the two pins on the cable align with the corresponding contacts on the smartwatch.

Figure 2: Detailed view of the USB-A plug and the magnetic charging connector. This image highlights the design of both ends of the cable, showing the metallic contacts on the magnetic connector.

3. Operating Instructions

Once the cable is properly connected to both a power source and your smartwatch, the charging process will begin automatically. Most smartwatches will display a charging indicator on their screen.

Charging Indication: Observe your smartwatch screen for a charging icon or battery percentage increase to confirm that charging is active.
Full Charge: Disconnect the cable once your smartwatch indicates a full charge to preserve battery health.
Compatibility: This cable is specifically designed for LIGE Smartwatch models ST9, 1829, 1830, 1821, 1825, 1826, 1842, 351, 352, 298, and 326. Using it with incompatible devices may not yield proper charging or could potentially damage the device.

Angled view of USB and Magnetic Connector

Figure 3: Angled perspective of the LIGE charging cable's USB and magnetic ends. This view provides a clearer look at the magnetic contact points and the overall build of the cable.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your charging cable:

Cleaning: Regularly wipe the magnetic contacts and the cable with a soft, dry cloth to remove dust, dirt, or moisture. Do not use liquid cleaners or abrasive materials.
Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling or bending the cable at sharp angles, especially near the connectors.
Durability: The cable is designed to withstand repeated bending, enhancing its durability. However, excessive force or continuous sharp bends should be avoided to prevent internal damage.

Figure 4: Illustration demonstrating the cable's ability to withstand repeated bending. The image shows the cable being bent at a 180-degree angle, highlighting its flexible and durable design.

5. Troubleshooting

If you encounter issues with your charging cable, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
Smartwatch not charging.	Loose connection. Faulty power source. Dirty charging contacts. Incompatible smartwatch model.	Ensure both ends of the cable are securely connected. Try a different USB power adapter or port. Clean the magnetic contacts on both the cable and smartwatch with a dry cloth. Verify your smartwatch model is listed as compatible.
Slow charging.	Low power output from USB source. Cable damage.	Use a USB power adapter with sufficient output (e.g., 5V/1A or higher). Inspect the cable for any visible damage. If damaged, replace it.
Magnetic connection is weak.	Debris on magnetic surface. Misalignment.	Clean the magnetic surfaces on both the cable and smartwatch. Ensure correct alignment of the pins and magnetic areas.

6. Specifications

Key technical specifications for the LIGE Magnetic Charging Cable:

Brand: LIGE
Model Name: LD
Connector Type: Magnetic Plug (2-pin) to USB-A
Cable Type: Charging Cable
Recommended Product Use: Charging and synchronization of LIGE smartwatches
Color: Black
Number of Pins: 2 (on magnetic connector)
Distance Between Chargers (Pins): Approximately 2.85 cm (28.5 mm)
Total USB Ports: 1 (USB-A)
Power: 18 Watts (Max)
Cable Length: Approximately 60 cm
Battery Composition: Not applicable (cable only, no internal battery)
Rechargeable Battery: Not applicable
Compatibility: LIGE Smartwatch models ST9, 1829, 1830, 1821, 1825, 1826, 1842, 351, 352, 298, 326

Cable dimensions including length and pin distance

Figure 5: Dimensions of the LIGE Magnetic Charging Cable. This image illustrates the cable's total length of 60 cm and the 2.84 cm distance between the magnetic charging pins.

7. Warranty and Support

For specific warranty information or customer support regarding your LIGE Magnetic Charging Cable, please refer to the product packaging or contact the retailer or manufacturer directly. This manual does not contain specific warranty terms or direct support contact details.

Information regarding spare parts availability and guaranteed software updates is not provided for this product.

	LIGE BT Call Smartwatch User Manual - Setup and Operation Comprehensive user manual for the LIGE BT Call Smartwatch, covering app download, Bluetooth pairing, device operation, and features. Learn how to set up and use your LIGE smartwatch.
	LIGE GPS Smartwatch: GloryFitPro App Installation and User Guide A comprehensive guide for LIGE GPS Smartwatches, detailing the download, installation, and usage of the GloryFitPro app. Learn how to register, log in, bind your device, and configure watch settings, along with important GPS notes and FCC compliance information.
	LIGE Kids Calling Smartwatch User Manual: Features, Setup, and Operation Comprehensive user guide for the LIGE 2024 Kids Calling Smartwatch. Learn how to set up, connect, and use features like calling, games, and activity tracking on your child's smartwatch. Compatible with iOS and Android.
	LIGE TX7 Smartwatch User Manual - Setup, Features, and Troubleshooting Comprehensive user manual for the LIGE TX7 smartwatch, covering setup, app connection (GloryFitPro), features like notifications, health tracking, and important notes. Includes instructions in English.
	LIGE 696 Smartwatch User Manual: Features, Health Monitoring, and Bluetooth Calls Comprehensive user manual for the LIGE 696 Sport Smart Watch for Men. Learn about its 1.96-inch screen, blood oxygen monitoring, Bluetooth calls, 100+ sport modes, and IP68 waterproofing.
	Manuel d'Utilisateur Montre Connectée LIGE SML21 : Guide Complet Manuel d'utilisation détaillé pour la montre connectée LIGE SML21, couvrant l'installation, les fonctionnalités, les notifications et les informations de sécurité.

LIGE LD