Introduction
This manual provides essential information for the safe and effective use of your MELPO 50W RGB LED Flood Light. This outdoor RGB color-changing flood light offers a wide range of applications, suitable for stage lighting, uplighting, spotlighting, background lighting, and LED wall wash effects. Please read these instructions thoroughly before installation and operation.
Image: MELPO RGB LED Flood Lights demonstrating versatile use in indoor, outdoor, patio, and general illumination settings.
Package Contents
Verify that all items listed below are included in your package:
- 4 x MELPO 50W RGB Flood Lights
- 4 x IR Remote Controls
- 1 x User Manual
Product Features
The MELPO 50W RGB LED Flood Light offers advanced features for dynamic lighting:
- 50W RGB Flood Light with Remote: Features 4 modes and 12 RGB colors, with a timing function and IP66 waterproof rating for decoration and atmosphere lighting.
- Built-in Timing Chips: Allows setting your preferred color to automatically turn on and off daily.
- 4 Lighting Modes: Includes Fresh, Romantic, Smooth, and DIY Flash modes. The DIY Flash mode allows customization of color change order and flashing speed, or setting a single color to flash.
- Original Wavelength Craft: Equipped with high-brightness RGB LED chips, ensuring bright, accurate colors that resist fading over long-term use.
Image: Overview of the MELPO 50W RGB Flood Light's key features, including color options, modes, and waterproof rating.
Image: Comparison highlighting the superior color accuracy and longevity of MELPO's original wavelength craft LED chips.
Setup Instructions
Follow these steps to set up your MELPO Flood Light:
- Unpack: Carefully remove the flood light and all accessories from the packaging.
- Mounting: The flood light features a 360-degree adjustable bracket. Securely mount the light to a stable surface using appropriate hardware (not included). Ensure the mounting location provides adequate support and allows for desired light direction.
- Power Connection: Connect the standard US 3-plug to a compatible power outlet (85-265V AC). The cable length is 5.91ft (1.8m).
- Positioning: Adjust the light's angle to achieve the desired illumination.
Important: The flood light is IP66 waterproof, meaning it is protected against powerful water jets. However, do not submerge it into water.
Image: Technical diagram illustrating the dimensions, power specifications, and adjustable mounting of the MELPO Flood Light.
Operating Instructions
Control your MELPO Flood Light using the included IR remote control:
- Power On/Off: Press the 'On' or 'Off' button on the remote to power the light.
- Color Selection: Choose from 12 distinct RGB colors by pressing the corresponding color buttons on the remote.
- Mode Selection: Select from 4 preset modes: 'Fresh', 'Romantic', 'Smooth', or 'DIY Flash'.
- DIY Flash Mode: In DIY Flash mode, use the 'Dim up' and 'Dim down' buttons to adjust the flashing speed. You can also customize the order of color changes.
- Brightness Adjustment: Use the brightness control buttons to increase or decrease the light intensity.
- Timing Function: Utilize the timer buttons to set the light to turn on and off automatically at specific times each day. The light has a memory function to retain your last settings.
Image: Detailed layout of the remote control for the MELPO Flood Light, indicating functions for color, mode, brightness, and timing.
Image: Demonstration of the timing function, showing lights automatically turning on and off at set times in an outdoor environment.
Maintenance
To ensure the longevity and optimal performance of your MELPO Flood Light:
- Cleaning: Periodically wipe the glass surface and aluminum housing with a soft, damp cloth to remove dust and debris. Do not use harsh chemicals or abrasive cleaners.
- Inspection: Regularly check the power cable and plug for any signs of damage. Ensure all connections are secure.
- Outdoor Use: While IP66 rated, avoid prolonged exposure to extreme weather conditions if possible, and ensure the light is not submerged in water.
Troubleshooting
If you encounter issues with your flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply; loose connection; remote battery depleted. | Check power outlet and connections. Replace remote battery. |
| Remote control not responding. | Remote battery depleted; obstruction between remote and light; remote too far. | Replace remote battery. Ensure clear line of sight to the light's IR receiver. Move closer to the light. |
| Colors are inaccurate or fading. | Not applicable for MELPO lights due to original wavelength craft. | If this occurs, contact customer support for assistance. |
Specifications
Detailed technical specifications for the MELPO 50W RGB LED Flood Light:
- Power: 50W
- Input Voltage: 85-265V AC
- Cable Length: 5.91ft (1.8m)
- Dimmable: Yes (via remote control)
- Colors: 12 RGB Colors
- Preset Modes: 3 (Fresh, Romantic, Smooth)
- Custom Mode: 1 (DIY Flash)
- Timing Function: Yes
- Memory Function: Yes
- Beam Angle: 180 Degrees
- Waterproof Rating: IP66 (Do not submerge)
- Material: Aluminum, Glass
- Finish Type: Unfinished
- Light Source Type: LED
- Mounting Type: Floor Mount (adjustable)
- Product Dimensions: 4.33"L x 1.38"W x 5.82"H
- Item Weight: 4.93 pounds (for the pack of 4)
- Model Number: BRFL-FL03
Warranty and Support
Your MELPO 50W RGB LED Flood Light comes with a 2-year warranty.
If you encounter any problems or require assistance, please do not hesitate to contact MELPO customer support. Refer to your purchase documentation or the MELPO brand store on Amazon for contact information.