Morpheus 360 Bluetooth Speaker BT5850BLK User Manual

Introduction

Thank you for choosing the Morpheus 360 Bluetooth Speaker, model BT5850BLK. This portable wireless speaker is designed to deliver high-quality audio with deep bass and 360-degree surround sound. Its IPX6 water-resistant rating makes it suitable for various environments, including outdoor use. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

What's in the Box

Please check the package contents to ensure all items are present:

• Morpheus 360 Bluetooth Speaker (BT5850BLK)
• Bicycle Mount
• 3.5mm AUX Cable
• USB-A to Type-C Charging Cable
• User's Guide and Warranty Information

Product Overview

Familiarize yourself with the speaker's controls and ports.

Figure 1: Front Controls - This image displays the front of the Morpheus 360 BT5850BLK speaker, highlighting the control buttons. From top to bottom, these include: Volume Up (+), Play/Pause/Answer Call (triangle), Volume Down (-), and Power (circle with vertical line).

Figure 2: Rear Ports - This image shows the back of the Morpheus 360 BT5850BLK speaker. Visible features include the charging port (USB Type-C), an AUX input, and a reset pinhole, all protected by a waterproof flap.

Control Buttons:

• Power Button (circle with vertical line): Press and hold to power on/off.
• Volume Up (+): Press to increase volume. Press and hold for next track.
• Volume Down (-): Press to decrease volume. Press and hold for previous track.
• Play/Pause Button (triangle): Press to play or pause music. Press to answer/end calls.

Ports:

• USB Type-C Charging Port: For charging the speaker.
• AUX Input (3.5mm): For wired audio connection.
• Reset Pinhole: Used to reset the device if necessary.

Setup

1. Charging the Speaker

1. Open the waterproof flap on the back of the speaker.
2. Connect the provided USB-A to Type-C charging cable to the speaker's Type-C port.
3. Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
4. The LED indicator will illuminate during charging. A full charge takes approximately 2.5 hours.
5. Once fully charged, disconnect the cable and securely close the waterproof flap to maintain IPX6 rating.

2. Bluetooth Pairing

1. Ensure the speaker is fully charged.
2. Press and hold the Power Button for 2-3 seconds to turn on the speaker. The LED indicator will flash, indicating it's in pairing mode.
3. On your Bluetooth-enabled device (smartphone, tablet, computer), go to the Bluetooth settings.
4. Search for available devices and select "Morpheus 360 BT5850BLK" from the list.
5. Once paired, the LED indicator will stop flashing and remain solid. You will hear an audible confirmation.
6. The speaker has a wireless range of up to 33 feet (10 meters).

3. True Wireless Stereo (TWS) Pairing (Optional)

To achieve 360-degree stereo sound, you can pair two Morpheus 360 BT5850BLK speakers together.

1. Ensure both speakers are powered on and not connected to any other Bluetooth device.
2. On one of the speakers (this will be the primary speaker), double-press the Power Button. It will enter TWS pairing mode.
3. The primary speaker will automatically search for and connect to the second speaker.
4. Once successfully paired, both speakers will emit an audible confirmation, and their LED indicators will synchronize.
5. Now, connect your Bluetooth device to the primary speaker as described in the "Bluetooth Pairing" section. Audio will play in stereo across both speakers.

Operating Instructions

Basic Music Controls:

• Play/Pause: Press the Play/Pause Button (triangle).
• Volume Up: Press the Volume Up (+) Button.
• Volume Down: Press the Volume Down (-) Button.
• Next Track: Press and hold the Volume Up (+) Button.
• Previous Track: Press and hold the Volume Down (-) Button.

Call Functions:

The speaker features a built-in microphone for hands-free calling.

• Answer/End Call: Press the Play/Pause Button (triangle) once.
• Reject Call: Press and hold the Play/Pause Button (triangle) for 2 seconds.

AUX Mode:

For devices without Bluetooth, use the included 3.5mm AUX cable.

1. Connect one end of the 3.5mm AUX cable to the speaker's AUX input.
2. Connect the other end to the audio output of your device.
3. The speaker will automatically switch to AUX mode. Control playback and volume from your connected device.

Maintenance

Proper care ensures the longevity of your Morpheus 360 speaker.

• Cleaning: Use a soft, dry cloth to clean the speaker. Do not use abrasive cleaners or solvents.
• Water Resistance: The speaker is IPX6 water-resistant. This means it can withstand powerful water jets, but it is not designed for submersion. Ensure the waterproof flap covering the ports is securely closed before exposure to water.
• Storage: Store the speaker in a cool, dry place away from extreme temperatures and direct sunlight.
• Battery Care: To preserve battery life, fully charge the speaker before first use and at least once every three months if not used regularly.

Figure 3: Outdoor Use - The speaker is shown near a pool, demonstrating its suitability for outdoor and wet environments due to its IPX6 water resistance. Always ensure port covers are sealed.

Figure 4: Water Resistance - This image illustrates the speaker's IPX6 water-resistant capability, with water droplets visible on its surface, indicating protection against strong water splashes.

Troubleshooting

If you encounter issues, refer to the following common problems and solutions:

• Speaker does not power on:
  • Ensure the battery is charged. Connect the speaker to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
  • If the issue persists, try performing a reset by inserting a thin object (like a paperclip) into the reset pinhole on the back of the speaker.
• No sound or low volume:
  • Check the volume levels on both the speaker and your connected device.
  • Ensure the speaker is properly paired via Bluetooth or the AUX cable is securely connected.
  • If using Bluetooth, ensure your device is within the 33-foot range.
• Bluetooth pairing fails:
  • Make sure the speaker is in pairing mode (flashing LED).
  • Disable and re-enable Bluetooth on your device.
  • Forget the speaker from your device's Bluetooth list and attempt to pair again.
  • Ensure no other devices are currently connected to the speaker.
• TWS pairing fails:
  • Ensure both speakers are fully charged and not connected to any other Bluetooth device.
  • Place the speakers close to each other during the TWS pairing process.
  • Follow the TWS pairing steps carefully, ensuring you double-press the power button on only one speaker to initiate the process.

Specifications

Key technical specifications for the Morpheus 360 BT5850BLK speaker:

Figure 5: Product Dimensions - This diagram illustrates the physical dimensions of the Morpheus 360 BT5850BLK speaker, measuring 6.23 inches in height and 2.6 inches in diameter.

Warranty and Support

The Morpheus 360 BT5850BLK speaker comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please refer to the contact information provided in the separate Warranty Information document included with your product, or visit the official Morpheus 360 website.