1. Introduction
This manual provides essential information for the safe and efficient operation of your NutriBullet Full-Size Blender Combo 1200W. Please read all instructions thoroughly before first use and retain this manual for future reference.
The NutriBullet Blender Combo is designed for versatile blending, offering both a multi-serving pitcher and single-serve cups. Its 1200-watt motor, multiple speeds, pulse function, and extraction program facilitate a wide range of blending tasks.
2. Important Safety Information
WARNING: Failure to follow these safety instructions may result in serious injury or damage to the appliance.
- Always unplug the appliance from the power supply before assembling, disassembling, or cleaning.
- Do not immerse the motor base in water or any other liquid.
- Avoid contact with moving parts. Blades are sharp. Handle with care.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but only when the blender is not running.
- Never blend hot liquids in sealed cups. When blending hot liquids in the pitcher, use the vented lid cap and do not fill above the "Liquid Max" line.
- Ensure the lid is securely locked in place before operating the blender.
- This product is built to North American & Canadian Electrical Standards (127 Volts). Do not use with voltage converters.
3. What's Included
Your NutriBullet Full-Size Blender Combo 1200W package includes the following components:
Figure 3.1: All included components of the NutriBullet Blender Combo.
- 1200 Watt Motor Base
- 64 oz (1.9L) Blender Pitcher with Lid and Vented Lid Cap
- Tamper
- 32 oz (900ml) Cup
- 24 oz (700ml) Handled Cup
- 2 To-Go Lids
- Easy-Twist Extractor Blade
- Recipe Book
4. Setup Instructions
- Unpack Components: Carefully remove all items from the packaging.
- Clean Before First Use: Wash all cups, lids, and blades with warm, soapy water. The pitcher and cups are dishwasher safe. Rinse the Easy-Twist Extractor Blade with soap and water. Do not immerse the motor base in water.
- Place Motor Base: Position the motor base on a clean, dry, and level surface. Ensure it is stable.
- Power Connection: Plug the power cord into a standard 127V electrical outlet.
Figure 4.1: Ensure all components are clean and ready for assembly.
5. Operating Instructions
5.1 Using the Blender Pitcher
- Add Ingredients: Place your desired ingredients into the 64 oz pitcher. Do not exceed the "MAX" fill line for cold ingredients or the "Liquid Max" line for hot liquids.
- Secure Lid: Place the pitcher lid onto the pitcher and twist clockwise until it is securely locked. Ensure the vented lid cap is in place.
- Place on Motor Base: Carefully place the assembled pitcher onto the motor base, aligning the pitcher handle with the right side of the base.
- Select Speed:
- EXTRACT: For nutrient extraction, this program runs through a cycle of varying speeds and pauses.
- LOW, MED, HIGH: For continuous blending at a set speed.
- PULSE: For short bursts of power, ideal for chopping or coarse blending.
- Start Blending: Press the desired speed button or the "EXTRACT" button.
- Stop Blending: Press the power button (⏻) or the active speed button to stop.
- Remove Pitcher: Once blending is complete, turn off the blender, then carefully lift the pitcher from the motor base.
Figure 5.1: The blender combo ready for operation with various ingredients.
Figure 5.2: Control panel with speed and function buttons.
5.2 Using the Single-Serve Cups
- Add Ingredients: Fill the 32 oz or 24 oz cup with your ingredients. Do not exceed the "MAX" fill line.
- Attach Blade: Twist the Easy-Twist Extractor Blade onto the cup until it is securely tightened.
- Place on Motor Base: Invert the cup and place it onto the motor base, twisting clockwise until it locks into place.
- Start Blending: Press the "EXTRACT" button for a pre-programmed cycle, or use "LOW", "MED", "HIGH", or "PULSE" for manual control.
- Stop Blending: Press the power button (⏻) or the active speed button to stop.
- Remove Cup: Twist the cup counter-clockwise to unlock and lift it from the motor base.
- Serve: Remove the blade and attach a To-Go Lid for portability.
Figure 5.3: Preparing a single-serve blend.
6. Care & Maintenance
Proper cleaning and maintenance will extend the life of your NutriBullet Blender Combo.
6.1 Cleaning
- Motor Base: Always unplug the motor base before cleaning. Wipe the motor base with a damp cloth. Do not immerse it in water or any other liquid.
- Pitcher and Cups: The pitcher and cups are dishwasher safe (top rack recommended). Alternatively, wash with warm, soapy water and rinse thoroughly.
- Easy-Twist Extractor Blade: Rinse the blade under running water immediately after use. Use a brush to remove any stubborn residue. Do not put the blade in the dishwasher as this can dull the blades and damage the gasket.
- Lids: Wash lids with warm, soapy water.
6.2 Storage
Store the blender and its components in a clean, dry place when not in use. Ensure all parts are dry before storing.
7. Troubleshooting
If you encounter issues with your NutriBullet Blender Combo, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; container not properly assembled/locked; power outage. | Ensure power cord is securely plugged in. Twist container onto motor base until it locks. Check household circuit breaker. |
| Motor stops during operation. | Overheating due to prolonged use or too many ingredients. | Unplug the unit and let it cool down for 15-20 minutes. Reduce ingredient load for next use. |
| Leaking from container. | Lid not secured; blade not tightened (for cups); gasket damaged. | Ensure lid is securely twisted onto pitcher. Ensure Easy-Twist Extractor Blade is fully tightened onto cup. Inspect gasket for damage and replace if necessary. |
| Ingredients not blending smoothly. | Too little liquid; too many solid ingredients; ingredients too large. | Add more liquid. Reduce the amount of solid ingredients. Cut larger ingredients into smaller pieces. Use the tamper for pitcher blending if needed. |
8. Product Specifications
- Brand: NutriBullet
- Model Number: NBF50500AW
- Power: 1200 Watts
- Voltage: 127 Volts
- Pitcher Capacity: 64 oz (1.9L)
- Cup Capacities: 32 oz (900ml), 24 oz (700ml)
- Product Dimensions: 7.75"D x 8.07"W x 16.97"H
- Item Weight: 11.18 pounds
- Blade Material: Stainless Steel
- Material Type Free: BPA Free
- Special Feature: Dishwasher Safe (Pitcher and Cups only)
9. Warranty & Support
Your NutriBullet Full-Size Blender Combo 1200W comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal household use.
For warranty claims, technical support, or to purchase replacement parts, please contact NutriBullet Customer Service. Refer to the official NutriBullet website for the most current contact information.
Online Resources: For additional recipes, tips, and product information, visit the official NutriBullet website: www.nutribullet.com
