1. Important Safety Information
Please read this manual carefully before operating the device. Keep this manual for future reference. Failure to follow safety instructions may result in injury or damage to the product.
- Power Supply: Ensure the power supply voltage matches the device's requirements (AC 90-240V, 50/60Hz).
- Grounding: Always connect the device to a grounded power outlet to prevent electric shock.
- Moisture: Do not expose the device to rain or moisture. Avoid using it in damp or wet environments.
- Heat: Maintain adequate ventilation around the unit. Do not operate near heat sources or in enclosed spaces.
- Installation: Securely mount the device using appropriate hardware. Ensure the mounting surface can support the weight of the fixture.
- Eye Safety: Avoid direct eye exposure to the light source. The light output is intense and can cause eye damage.
- Servicing: Refer all servicing to qualified personnel. Do not attempt to repair the unit yourself.
- Cleaning: Disconnect from power before cleaning. Use a soft, dry cloth.
2. Product Overview
The DJXFLI Mini Spider Moving Head Light is a compact and versatile stage lighting fixture designed for various events. It features 8 powerful 5W RGBW 4-in-1 LED beads, offering a wide range of color mixing capabilities and dynamic lighting effects. Its moving head design allows for independent movement of each beam, creating chasing light effects and continuous swing patterns. The unit supports multiple control modes for flexible operation.
Figure 2.1: The DJXFLI Mini Spider Moving Head Light in operation, displaying multiple colored beams.
3. Features
- Light Source: 8 x 5W RGBW 4-in-1 LED beads for vibrant color mixing.
- Movement: Independent movement of each beam with a tilt range of 145°.
- Beam Angle: Narrow 4° beam angle for sharp, defined light effects.
- Control Modes: Auto, Sound Activated, DMX512, and Master/Slave for versatile operation.
- Effects: High-speed flash, random strobe (1-25 flashes per second), and 0-100% dimming range.
- Installation: Equipped with a bracket for ground placement, T-pole, T-truss, or ceiling mounting.
- Construction: Durable metal housing.
Figure 3.1: Detailed view of the light's beam angle and tilt capabilities.
Figure 3.2: Illustration of dimming and strobe effects.
4. Package Contents
Verify that all items are present in the package:
- Spider Moving Head Light 8x5W
- Power cable
- DMX cable
- User manual
- Screws + Bow mount (mounting bracket)
Figure 4.1: Contents included in the product package.
5. Setup and Installation
The Mini Spider Moving Head Light offers flexible installation options. Always ensure the fixture is securely mounted and that all connections are firm.
5.1 Mounting
The included bracket allows for various mounting configurations:
- Ground Placement: Place the unit on a stable, level surface.
- T-Pole/T-Truss Mounting: Attach the bracket to a T-pole or truss system using appropriate clamps (not included) and screws. Ensure the clamps are rated for the fixture's weight.
- Ceiling Mounting: Securely fasten the bracket to a ceiling structure using the provided screws or other suitable hardware. Verify the ceiling can support the fixture's weight.
Warning:
- Always use a safety cable when mounting the fixture overhead.
- Ensure the mounting location is free from vibrations and is not exposed to extreme temperatures.
5.2 Connections
After mounting, connect the necessary cables:
- Power Connection: Connect the power cable to the unit's power input and then to a grounded electrical outlet.
- DMX Connection (Optional): For DMX control, connect a DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN, and so on.
Figure 5.1: Control panel and connection ports.
6. Operating Modes
The DJXFLI Mini Spider Moving Head Light supports four primary operating modes:
- Auto Mode: The fixture runs through pre-programmed light shows automatically.
- Sound Activated Mode: The light effects respond to ambient sound or music detected by the built-in microphone.
- DMX512 Mode: Provides professional control over all functions using an external DMX controller.
- Master/Slave Mode: Allows multiple units to synchronize their effects. One unit acts as the master, controlling all connected slave units.
Figure 6.1: Overview of available control modes.
6.1 DMX Control
The fixture utilizes DMX512 protocol for advanced control. It typically offers 7 or 15 DMX channels, allowing precise manipulation of parameters such as:
- Dimmer (0-100%)
- Strobe speed
- Red, Green, Blue, White LED intensity
- Tilt movement
- Program selection
- Sound activation sensitivity
Refer to the DMX channel chart in the full user manual for detailed channel assignments and values.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your DJXFLI Mini Spider Moving Head Light.
- Cleaning: Periodically clean the lenses and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
- Ventilation: Ensure ventilation openings are clear of dust and debris to prevent overheating.
- Storage: When not in use, store the fixture in a dry, dust-free environment.
8. Troubleshooting
If you encounter issues with your Mini Spider Moving Head Light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; no power from outlet; faulty fuse. | Check power cable connection; test outlet with another device; replace fuse if necessary. |
| No light output | Dimmer channel set to 0; fixture in blackout mode; LED failure. | Increase dimmer level; check DMX settings; contact support if LEDs are faulty. |
| No DMX control | Incorrect DMX address; faulty DMX cable; DMX controller issue; incorrect DMX mode selected. | Verify DMX address setting; test DMX cable; check DMX controller; ensure fixture is in DMX mode. |
| Movement issues | Obstruction; motor fault; DMX control issue. | Clear any obstructions; check DMX settings for tilt control; contact support if motor is faulty. |
| Sound Activated mode not working | Microphone sensitivity too low; no sound input; fixture not in Sound Activated mode. | Increase microphone sensitivity; ensure sound is present; select Sound Activated mode. |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Model Number | DJXFLI Stage light 8x5W |
| Light Source | 8 x 5W RGBW 4-in-1 LEDs |
| Power Source | Corded Electric |
| Voltage | 90-240V |
| Wattage | 50 Watts (Max Compatible: 40 Watts) |
| Brightness | 4000 lumen |
| Beam Angle | 4° |
| Tilt Angle | 145° |
| Control Modes | Auto, Sound Activated, DMX512, Master/Slave |
| DMX Channels | 7/15 Channels |
| Material | Metal |
| Product Dimensions (L x W x H) | 11.22" x 5.9" x 4.72" (28.5cm x 15cm x 12cm) |
| Item Weight | 4.19 pounds (1.9 kg) |
| Features | Dimmable, Strobe |
Figure 9.1: Product dimensions.
Figure 9.2: Product dimensions and tilt range visualization.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact DJXFLI customer service directly. Keep your proof of purchase for any warranty claims.
Manufacturer: DJXFLI