Hercules DJControl Inpulse 200 MK2

Introduction

The Hercules DJControl Inpulse 200 MK2 is a 2-channel DJ controller designed for aspiring DJs and beginners. It integrates seamlessly with Serato DJ Lite and DJUCED software, offering intuitive controls and built-in light guides to assist with beatmatching. This manual provides comprehensive instructions for setting up, operating, and maintaining your DJ controller, helping you to explore the world of DJing with ease.

Figure 1: Hercules DJControl Inpulse 200 MK2 Overview

This image displays the top-down view of the DJControl Inpulse 200 MK2, highlighting its compact design and the layout of its primary controls, including the two decks, central mixer section, and performance pads.

Setup

1. Unboxing and Contents

Upon opening the package, ensure all components are present:

• DJ Deck (Hercules DJControl Inpulse 200 MK2)
• Required USB cable
• Serato DJ Lite software download information
• DJUCED software download information
• Owner's manual (this document)

Figure 2: Angled View of the Controller

This image provides an angled perspective of the DJControl Inpulse 200 MK2, illustrating its compact form factor and the placement of its USB port and audio outputs.

2. Connecting the Controller

1. Connect the supplied USB cable from the DJControl Inpulse 200 MK2 to an available USB port on your computer (Mac or PC).
2. Connect your headphones to the headphone output jack on the front of the controller.
3. Connect your speakers to the master output jacks on the rear of the controller.

3. Software Installation

The DJControl Inpulse 200 MK2 is compatible with Serato DJ Lite and DJUCED software. Follow these steps to install:

• Serato DJ Lite: Visit the official Serato website and download the latest version of Serato DJ Lite. Follow the on-screen instructions for installation.
• DJUCED: Visit the official DJUCED website and download the latest version of DJUCED. Follow the on-screen instructions for installation.

Ensure your computer meets the minimum system requirements for the chosen software to ensure optimal performance.

Figure 3: Serato DJ Lite and DJUCED Software Interfaces

These images show the graphical user interfaces of Serato DJ Lite and DJUCED, the primary software applications compatible with the Inpulse 200 MK2 controller.

Operating Instructions

1. Overview of Controls

The DJControl Inpulse 200 MK2 features a standard DJ controller layout with two decks and a central mixer section. Familiarize yourself with the following key components:

• Jog Wheels: Used for scratching, nudging, and navigating tracks.
• Tempo Faders: Adjust the speed (BPM) of tracks.
• EQ Knobs (Low, Mid, High): Adjust the frequency ranges of your audio.
• Filter Knobs: Apply high-pass or low-pass filters.
• Gain Knobs: Adjust the input volume for each deck.
• Performance Pads: Multi-functional pads for Hot Cues, Stems, FX, and Sampler modes.
• Master Volume: Controls the overall output volume.
• Headphones Volume & Cue Mix: Adjust headphone monitoring.

Figure 4: Central Mixer Controls

This image provides a detailed view of the central mixer area, including the EQ, filter, and gain controls for each deck, as well as the master volume and headphone controls.

2. Basic DJing Functions

• Loading Tracks: Use the "LOAD" buttons to assign tracks from your software library to Deck 1 or Deck 2.
• Playing/Pausing: Use the Play/Pause buttons (►/❚❚) located below the performance pads.
• Cueing: Press the "CUE" button to set a temporary cue point or return to the beginning of the track.
• Beatmatching with Beatmatch Guide:

  The Inpulse 200 MK2 features built-in light guides to assist with beatmatching. Lights below the jog wheels and next to the tempo faders will illuminate to indicate whether you need to speed up or slow down a track to match the BPM of the other track.

  

  Figure 5: Beatmatch Guide Indicator

  This image shows the Beatmatch Guide logo, representing the controller's feature that uses light indicators to help users synchronize track tempos.

• STEMS Feature:

  The STEMS feature allows you to isolate or remove instrumental and vocal parts of a track. Press the "STEMS" button above the performance pads to activate this mode. The pads will then control different stem elements (e.g., vocals, drums, bass, melody), enabling creative mixing possibilities.

  

  Figure 6: Performance Pads and STEMS Button

  This image focuses on the performance pads and the dedicated STEMS button, illustrating how users can access and manipulate different audio components of a track.

• Hot Cue, FX, Sampler:

  The performance pads can switch between different modes:

  • Hot Cue: Set and jump to specific points in a track.
  • FX: Apply various effects to your audio.
  • Sampler: Trigger pre-loaded audio samples.

3. Integrating Music Streaming Services

The software (Serato DJ Lite/DJUCED) supports integration with various music streaming services such as Beatport ADVANCED, Beatsource, SoundCloud GO+, and TIDAL. Refer to your software's documentation for instructions on connecting your streaming accounts.

4. DJ Academy Tutorials

To further enhance your DJing skills, Hercules provides access to DJ Academy video tutorials. These tutorials cover fundamental techniques and advanced tips for mixing. Access them through the DJUCED software or the Hercules website.

Figure 7: DJ Academy Tutorial Thumbnail

This image shows a thumbnail from a DJ Academy video, indicating the availability of instructional content to help users learn DJing techniques.

Maintenance

1. Cleaning

To maintain the longevity and appearance of your DJControl Inpulse 200 MK2:

• Always disconnect the controller from your computer before cleaning.
• Use a soft, dry, lint-free cloth to wipe down the surface.
• For stubborn dirt, slightly dampen the cloth with water. Avoid using harsh chemicals, abrasive cleaners, or solvents.
• Do not spray liquids directly onto the controller.
• Keep dust and debris out of faders and knobs. Use compressed air if necessary.

2. Storage

When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use a protective case to prevent damage.

Troubleshooting

This section addresses common issues you might encounter. For more detailed support, refer to the Hercules support website or the software documentation.

Specifications

Warranty and Support

Warranty Information

Hercules products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your DJControl Inpulse 200 MK2, please refer to the warranty card included in your product packaging or visit the official Hercules website's support section.

Customer Support

For technical assistance, product registration, or further inquiries, please contact Hercules customer support. You can find contact information and frequently asked questions (FAQs) on the official Hercules website: www.hercules.com/en-us/support/