1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Amgo 34' x 34' Grey Rectangle/Square Super Ring Sun Shade Sail. Please read these instructions thoroughly before beginning installation to ensure optimal performance and longevity of your product.
Image 1.1: Amgo 34' x 34' Grey Rectangle/Square Super Ring Sun Shade Sail providing shade over a patio and pool area.
2. Product Features
- Super Heavy Duty New Patent Design: Constructed from 260 GSM permeable, extra heavy-duty fabric. Features heavy-duty stainless steel mounting rings and cable wires built into the edges. All pulling strength is directed to the cable wires, enhancing durability and appearance.
- Virgin, UV Stabilized Compound & Thick Material: Made from 260 GSM 100% virgin (non-recycled) HDPE material. The fabric has undergone 20,000 hours of laboratory UV testing, proving to be 70% more durable than recycled HDPE under sun exposure. Treated with a UV stabilized compound to prevent drying out.
- 98% UV Blockage & Breathable Woven Fabric: Blocks 98% of harmful UV rays, significantly reducing temperature and UV light in shaded areas during summer. The breathable fabric allows water and air to pass through freely, preventing water pooling on rainy days. Resistant to both UV and water, requiring minimal maintenance.
Image 2.1: Visual comparison illustrating the superior thickness and strength of Amgo's cable, Super-Ring, and fabric compared to other shade sails.
Image 2.2: Detailed view of the shade sail's construction, highlighting the internal stainless steel cable and the 260 GSM heavy-duty fabric.
Image 2.3: Illustration demonstrating the permeable nature of the fabric, allowing water to pass through.
3. Setup and Installation
Proper installation is crucial for the performance and safety of your shade sail. Hardware kits are required for installation and are sold separately. Amgo hardware kits and cables are recommended for best results.
3.1 Required Components (Sold Separately)
- Shade Sail Hardware Kits (e.g., turnbuckles, pad eyes, carabiners)
- Cable Ropes (one per D-Ring; avoid nylon ropes)
3.2 Installation Steps
- Determine Mounting Points: Identify suitable mounting points such as existing poles, trees, or walls. Ensure these points are structurally sound and can withstand the tension of the shade sail.
- Measure and Plan: The measurement of the shade sail is taken from D-Ring to D-Ring. When planning your installation, leave a space of 0.5 to 1.5 feet between each shade sail D-Ring and its corresponding mounting point. This space is necessary for the hardware kit components (e.g., turnbuckles for tensioning).
- Install Hardware: Securely attach the hardware kits to your chosen mounting points. Ensure all connections are tight and stable.
- Connect Shade Sail: Connect each D-Ring of the shade sail to the hardware kit using a cable rope. Ensure the cable ropes are strong and appropriate for outdoor use. Do not use nylon ropes as they may break easily.
- Tension the Sail: Gradually apply tension to the shade sail using turnbuckles or similar tensioning devices. The edges of the shade sail are designed with a slight curve to allow for proper stretching and to prevent sagging in the middle once tensioned. Ensure the sail is taut and evenly tensioned across all points.
Image 3.1: Installation guide illustrating the use of turnbuckles and rings, and the recommended 0.5-1.5 foot spacing for hardware.
Image 3.2: A corner of the Amgo shade sail connected to a wall, demonstrating a properly tensioned installation.
4. Operating Instructions
The Amgo Super Ring Sun Shade Sail is designed to provide static shade and UV protection. Once properly installed and tensioned, no further operational steps are typically required. The breathable fabric allows for continuous air circulation and prevents water accumulation.
5. Maintenance
The shade sail is designed for durability and low maintenance. Its UV and water-resistant properties minimize the need for frequent care.
5.1 Cleaning
To clean your shade sail, use mild soap and water. Avoid harsh chemicals or abrasive cleaning tools, as these can damage the fabric and its UV protective coating. Rinse thoroughly with clean water and allow to air dry completely before storage, if applicable.
5.2 Seasonal Care
While durable, consider removing the shade sail during extreme weather conditions such as heavy snow, strong winds, or prolonged periods of non-use to extend its lifespan.
6. Troubleshooting
6.1 Sagging Sail
If the shade sail appears to sag, check the tension at all mounting points. Use turnbuckles to increase tension evenly until the sail is taut. Ensure the mounting points are secure and not yielding under tension.
6.2 Hardware Issues
Periodically inspect all hardware components for wear, corrosion, or damage. Replace any compromised parts immediately to maintain the integrity and safety of the installation.
7. Specifications
| Attribute | Detail |
|---|---|
| Size | 34' x 34' Custom Size |
| Color | Gray |
| Brand | Amgo |
| Material | High Density Polyethylene (HDPE) |
| Style | Classic |
| Special Feature | Heavy, Heavy Duty, Heavy Duty-260 |
| Water Resistance Level | Not Water Resistant |
| Installation Type | Tie |
| Mounting Type | Post Mount |
| Number of Items | 1 |
| Item Weight | 57.8 pounds |
| Manufacturer | Amgo |
| Model Number | ataws-34' x 34'Grey |
8. Warranty and Support
8.1 Warranty Information
Your Amgo Super Ring Sun Shade Sail comes with a 5-year full warranty. This warranty covers defects under normal weather conditions and usage. For warranty claims or inquiries, please retain your proof of purchase.
8.2 Customer Support
For any questions, technical assistance, or support regarding your product, please contact Amgo Factory directly. Contact information can typically be found on your purchase receipt or the seller's page where the product was acquired.