Introduction
This manual provides essential information for the safe and efficient use of your Fujitsu P2711 TE QHD 27-inch monitor. Please read these instructions carefully before operating the device and retain them for future reference.
1. Setup
1.1 Unpacking
Carefully remove the monitor and all accessories from the packaging. Inspect for any damage that may have occurred during transit. Keep the original packaging for future transport or service needs.
1.2 Assembling the Stand
Place the monitor face down on a soft, clean surface to prevent scratches. Attach the stand base to the stand column, then secure the assembled stand to the back of the monitor using the provided screws. Ensure all connections are firm.
Image: Front view of the Fujitsu P2711 TE QHD monitor with its stand assembled.
1.3 Connecting Cables
Connect the necessary cables to the monitor and your computer. Ensure the monitor is powered off before making any connections.
- Power Cable: Connect one end to the monitor's power input and the other to a grounded electrical outlet.
- Video Cable: Connect a DisplayPort or HDMI cable from your computer's video output to the corresponding input on the monitor.
- USB Upstream Cable (for USB Hub): Connect the USB upstream cable from your computer to the monitor's USB upstream port to enable the integrated USB hub functionality.
Image: Rear view of the monitor, highlighting the input ports for power, video (HDMI, DisplayPort), and USB connections.
2. Operating the Monitor
2.1 Power On/Off
Press the power button located on the front or bottom bezel of the monitor to turn it on or off. The power indicator light will illuminate when the monitor is active.
2.2 On-Screen Display (OSD) Menu
The OSD menu allows you to adjust various monitor settings. Use the control buttons, typically located on the front or bottom bezel, to navigate and select options.
Image: Angled front view of the monitor, showing the location of the control buttons for accessing the OSD menu.
- Menu Button: Opens the OSD menu.
- Navigation Buttons: Used to move through menu options.
- Select/Enter Button: Confirms a selection.
- Exit Button: Closes the OSD menu.
2.3 Adjusting Display Settings
Within the OSD menu, you can adjust settings such as:
- Brightness/Contrast: Adjust the overall luminance and difference between light and dark areas.
- Color Settings: Modify color temperature, gamma, and individual RGB levels.
- Input Selection: Manually switch between connected video sources (e.g., HDMI, DisplayPort).
- Picture Mode: Select predefined display modes for different content types (e.g., Standard, Text, Movie).
3. Maintenance
3.1 Cleaning the Monitor
To clean the screen, gently wipe it with a soft, lint-free cloth slightly dampened with water or a non-abrasive screen cleaner. Avoid using harsh chemicals or abrasive materials. For the casing, use a soft, dry cloth.
3.2 Storage
If storing the monitor for an extended period, disconnect all cables and pack it in its original packaging to protect it from dust and physical damage. Store in a cool, dry place.
4. Troubleshooting
4.1 No Image on Screen
- Ensure the power cable is securely connected to both the monitor and the power outlet.
- Verify that the video cable (HDMI/DisplayPort) is properly connected to both the monitor and the computer.
- Check if the monitor is powered on (power indicator light should be active).
- Confirm that the correct input source is selected in the OSD menu.
- Restart your computer.
4.2 Image Quality Issues (e.g., blurry, distorted)
- Ensure your computer's display resolution is set to the monitor's native resolution (2560 x 1440 pixels).
- Check the video cable for damage or loose connections. Try a different cable if available.
- Adjust brightness, contrast, and color settings in the OSD menu.
- Update your graphics card drivers.
4.3 USB Hub Not Functioning
- Verify that the USB upstream cable is connected from the monitor to your computer.
- Ensure the monitor is powered on.
- Try connecting the USB upstream cable to a different USB port on your computer.
5. Technical Specifications
Below are the key technical specifications for the Fujitsu P2711 TE QHD monitor:
| Feature | Specification |
|---|---|
| Display Size | 27 inches (68.6 cm) |
| Panel Type | LED IPS |
| Native Resolution | 2560 x 1440 pixels (Quad HD) |
| Aspect Ratio | 16:9 |
| Response Time | 5 ms |
| Brightness | 350 cd/m² |
| Contrast Ratio | 1000:1 |
| Viewing Angle (H/V) | 178° / 178° |
| Refresh Rate | 60 Hz |
| Connectivity | HDMI, DisplayPort, USB Hub (3.2 Gen 1) |
| VESA Mount Compatible | Yes |
| Dimensions (with stand) | 22.05 x 61.36 x 51.22 cm |
| Weight (with stand) | 8 kg |
Image: The Fujitsu P2711 TE QHD monitor displaying its physical dimensions.
For detailed energy efficiency information, please refer to the EU EPREL database:
View EPREL Product Information
Image: The EU Energy Label for the Fujitsu P2711 TE QHD monitor, indicating its energy efficiency class.
6. Warranty and Support
This Fujitsu monitor comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty duration and coverage details.
For technical support, service, or warranty claims, please contact Fujitsu customer service through their official website or the contact information provided in your product documentation.
