ACEGMET P200 Thermal Camera User Manual

1. Introduction

The ACEGMET P200 is a versatile thermal imaging camera designed for various inspection and diagnostic tasks. It features a 90-degree rotating lens, high infrared resolution, and WiFi connectivity, making it suitable for both professional and everyday use. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your P200 thermal camera.

The ACEGMET P200 thermal camera features a unique 90-degree rotating lens, allowing for flexible inspection angles. It can connect wirelessly to a smartphone for real-time viewing and analysis of thermal images.

2. Product Overview

2.1 Key Features

• 90° Rotating Lens with WiFi: Allows for capturing images in hard-to-reach areas and seamless synchronization with smartphones for real-time viewing and basic analysis.
• High Resolution Thermal Imaging: Features an impressive 240 x 180 infrared resolution for clear and detailed thermal images, ensuring accurate temperature measurements.
• Thermal Image Enhancement: Integrates a 2MP visual camera to overlay visual and thermal information, offering comprehensive views and various overlay modes for precise problem identification.
• Compact Design: Equipped with a slim 3.5-inch touch screen, making it portable and easy to operate in the field.
• Durability: IP54 rated for dust and water resistance, and 2m drop-tested, ensuring reliability in demanding environments.
• Long Battery Life: Provides up to 6 hours of continuous use on a single charge.

This image highlights the core technical specifications of the ACEGMET P200, including its infrared resolution, temperature measurement range, visual camera capabilities, display type, storage capacity, and thermal sensitivity.

3. Setup

3.1 Charging the Device

Before initial use, fully charge the ACEGMET P200. Connect the provided charging cable to the device and a suitable power source. The device typically takes approximately 3 hours to fully charge, providing up to 6 hours of continuous operation.

3.2 Powering On/Off

• To Power On: Press and hold the power button located on the side of the device until the screen illuminates.
• To Power Off: Press and hold the power button until a shutdown prompt appears on the screen, then confirm to power off.

3.3 Initial Settings

Upon first power-on, you may be prompted to configure basic settings such as language, date, time, and temperature units (Celsius, Fahrenheit, or Kelvin). Navigate through the touch screen interface to select your preferred options.

3.4 WiFi Connection

The P200 supports WiFi connectivity for enhanced functionality. To connect:

1. Access the 'Settings' menu on the device's touch screen.
2. Select 'WiFi' and enable the function.
3. Search for available networks and select your desired network.
4. Enter the password if prompted.
5. Once connected, you can use the dedicated ACEGMET application on your smartphone for real-time image viewing and analysis.

The ACEGMET P200 supports versatile connectivity, enabling users to transfer data and perform analysis on both Windows-based computers and Android smartphones, facilitating detailed reporting and remote monitoring.

4. Operating Instructions

4.1 Basic Operation

The ACEGMET P200 is operated primarily through its 3.5-inch touch screen. Navigate menus, select options, and adjust settings by tapping and swiping. The device has a 20Hz refresh rate, allowing for smooth tracking of moving objects.

4.2 Using the 90° Rotating Lens

The lens module can be rotated up to 90 degrees. This feature allows you to capture thermal images from various angles, including overhead or low-lying areas, without needing to contort your body or the device itself. Gently rotate the lens to the desired position.

4.3 Imaging Modes

The P200 offers several imaging modes to suit different inspection needs:

• Infrared Mode: Displays a pure thermal image.
• Visible Mode: Displays a standard visual image from the 2MP optical camera.
• Picture-in-Picture Mode: Overlays a smaller thermal image onto a larger visible light image.
• Dual-Light Fusion Mode: Blends thermal and visible light images to provide enhanced detail and context.

The ACEGMET P200 offers multiple imaging modes to enhance inspection. These include pure infrared, visible light, picture-in-picture (overlaying thermal on visible), and dual-light fusion for comprehensive analysis.

4.4 Temperature Measurement

The device supports various temperature measurement modes:

• Center Point: Displays the temperature at the center of the screen.
• Max Temperature: Automatically identifies and displays the highest temperature within the field of view.
• Min Temperature: Automatically identifies and displays the lowest temperature within the field of view.

You can also set high and low temperature alarms to alert you when temperatures exceed or fall below predefined thresholds.

The ACEGMET P200 provides distinct thermal images, allowing for quick and accurate temperature scans of targets, such as electrical panels, to identify heat anomalies.

4.5 Palettes

Select from various color palettes to visualize thermal data, such as Black Hot, White Hot, Iron Red, Lava, Rainbow, High Contrast Rainbow, and Black Red. Different palettes can highlight temperature differences more effectively depending on the application.

4.6 Saving Images and Data

The P200 comes with 16GB of internal memory for storing thermal images and data. To save an image, press the designated capture button on the device. Saved data can be reviewed on the device or transferred to a computer using the included PC analysis software.

4.7 Remote Viewing

Once connected via WiFi, the ACEGMET P200 can stream live thermal images to a compatible smartphone or tablet. This allows for remote monitoring and analysis, which is particularly useful in complex or hazardous environments.

With its WiFi capabilities, the ACEGMET P200 allows for real-time thermal image viewing and basic analysis directly on a connected smartphone, enhancing convenience for remote inspections.

5. Maintenance

5.1 Cleaning

• Lens: Use a soft, lint-free cloth specifically designed for optical lenses. Do not use abrasive materials or harsh chemicals.
• Body: Wipe the device body with a soft, damp cloth. Avoid excessive moisture and never immerse the device in water.

5.2 Storage

Store the ACEGMET P200 in a cool, dry place, away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the device is partially charged (around 50%) to preserve battery health.

5.3 Battery Care

The device uses a Lithium-ion battery. To maximize battery lifespan:

• Avoid fully discharging the battery frequently.
• Do not expose the device to high temperatures for prolonged periods.
• Use only the manufacturer-recommended charging accessories.

6. Troubleshooting

6.1 Common Issues and Solutions

7. Specifications

8. Warranty and Support

For warranty information and technical support, please refer to the documentation included with your product or visit the official ACEGMET website. If you encounter any issues not covered in this manual, please contact ACEGMET customer service for assistance.