Introduction
Thank you for choosing the URBN Beat 800 True Wireless Earbuds. This manual provides essential information for setting up, operating, and maintaining your earbuds to ensure optimal performance and longevity. Please read this manual carefully before use and retain it for future reference.
Package Contents
Verify that all items are present in your package:
- URBN Beat 800 TWS Earbuds (Left and Right)
- Charging Case
- USB Type-C Charging Cable
- User Manual
Product Overview
The URBN Beat 800 earbuds are designed for a superior audio experience with features like 13mm dynamic drivers, Environmental Noise Cancellation (ENC) for clear calls, and intuitive touch controls.
Image: URBN Beat 800 TWS Earbuds in their charging case, highlighting key features like 13mm Dynamic Drivers, Hybrid Dual Microphone, Up to 25 hours Playback Time, and ENC Technology.
Image: Close-up of an URBN Beat 800 earbud, illustrating the 13mm Titanium Diaphragm for dynamic sound.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case.
- Place the earbuds into the charging case.
- Connect the USB Type-C cable to the charging port on the case and the other end to a USB power source (e.g., wall adapter, computer).
- The indicator lights on the case will show the charging status. Once fully charged, the lights will indicate completion or turn off.
Note: A 10-minute charge provides approximately 100 minutes of playback time.
2. Pairing with a Device
The earbuds support automatic pairing.
- Open the charging case. The earbuds will automatically enter pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth.
- Search for available Bluetooth devices and select "URBN Beat 800" from the list.
- Once connected, you will hear an audible confirmation.
Note: The earbuds will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.
Image: The URBN Beat 800 charging case with an IPX5 rating icon and an "Auto Pair & Connect" icon, indicating water resistance and ease of connection.
Operation
Touch Controls
The URBN Beat 800 earbuds feature intuitive touch controls on each earbud. The functions are as follows:
Image: Diagram illustrating the touch controls for the Left (L) and Right (R) URBN Beat 800 earbuds, including single tap, double tap, triple tap, and long press functions.
| Action | Left Earbud (L) | Right Earbud (R) |
|---|---|---|
| Single Tap | Volume Decrease | Volume Increase |
| Double Tap | Play/Pause Music, Answer/End Calls | |
| Triple Tap | Activate Siri / Google Assistant | |
| Long Press | Previous Track, Reject Call | Next Track, Reject Call |
Voice Assistant
Activate your device's voice assistant (Siri or Google Assistant) by triple-tapping either earbud.
Call Management
Manage your calls using the touch controls:
- Answer/End Call: Double tap either earbud.
- Reject Call: Long press either earbud.
Image: Illustration of two URBN Beat 800 earbuds, emphasizing the Hybrid Dual Microphones for clear call quality with Environmental Noise Cancellation (ENC) Technology.
Maintenance
Cleaning
- Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use harsh chemicals, cleaning solvents, or strong detergents.
- Ensure charging contacts on both earbuds and case are clean and dry.
Storage
- Store the earbuds in their charging case when not in use to protect them and keep them charged.
- Avoid storing in extreme temperatures or high humidity.
Troubleshooting
If you encounter issues with your URBN Beat 800 earbuds, refer to the following common solutions:
- Earbuds not pairing/connecting:
- Ensure earbuds are charged.
- Turn off and on Bluetooth on your device.
- Forget "URBN Beat 800" from your device's Bluetooth list and re-pair.
- Place earbuds back in the case, close, wait a few seconds, then open again to reset.
- Only one earbud working:
- Ensure both earbuds are charged.
- Place both earbuds back in the charging case, close the lid, then open it again.
- Try re-pairing the earbuds with your device.
- Low volume or poor sound quality:
- Adjust volume on both your device and using the earbud touch controls.
- Ensure earbuds are properly seated in your ears.
- Clean any debris from the earbud speakers.
- Earbuds not charging:
- Ensure the charging cable is securely connected to both the case and the power source.
- Check if the charging contacts on the earbuds and inside the case are clean.
- Try a different charging cable or power adapter.
Specifications
| Feature | Detail |
|---|---|
| Model Name | Beat 800 (UBT800) |
| Connectivity | Bluetooth (True Wireless) |
| Driver Size | 13mm Dynamic Titanium Driver |
| Microphone | Hybrid Dual Microphone with ENC Technology |
| Playback Time | Up to 5 hours (earbuds), Up to 25 hours (with charging case) |
| Charging | Type-C Fast Charging (10 mins charge = 100 mins playback) |
| Water Resistance | IPX5 Rated |
| Controls | Touch Controls, Voice Assistant (Siri/Google Assistant) |
| Ear Placement | In Ear |
| Weight | 37 Grams (Item Weight Unit of Measure) |
| Material | Polycarbonate (PC), Rubber |
Image: Visual representation of URBN Beat 800 playback time (up to 5 hours per charge, 25 hours total with case) and Type-C fast charging (10 minutes charge for 100 minutes playback).
Warranty and Support
The URBN Beat 800 TWS Earbuds come with a 1 Year Replacement Warranty from the date of purchase.
For warranty claims, technical support, or any other inquiries, please contact URBN customer service. Refer to the contact information provided in your product packaging or visit the official URBN website.
Manufacturer Contact Information: Rajprabha Enclave, Building No. 6, Unit No. 209&210, 1st Floor, Bhoidapada, Sativali Road, Vasai (East), Palghar 401208, Maharashtra, India.