GROHE 41179000

GROHE 41179000 Start Accessories Toilet Roll Holder with Cover

Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your GROHE 41179000 Start Accessories Toilet Roll Holder with Cover. Please read these instructions carefully before installation and retain them for future reference.

GROHE 41179000 Start Accessories Toilet Roll Holder with Cover in Chrome finish

Image: GROHE 41179000 Start Accessories Toilet Roll Holder with Cover, showcasing its sleek design and chrome finish.

Setup and Installation

The GROHE Start toilet roll holder offers two primary installation methods: traditional screw-in mounting or the convenient GROHE QuickGlue system.

Method 1: Screw-In Installation

This method provides a secure and permanent fixture. Screws and dowels required for installation are included with the product.

  1. Prepare the surface: Choose a suitable location on your wall, ensuring it is clean and dry.
  2. Mark drilling points: Use the mounting plate as a template to mark the positions for drilling.
  3. Drill holes: Drill holes at the marked points using an appropriate drill bit for your wall material.
  4. Insert dowels: Insert the provided dowels into the drilled holes.
  5. Attach mounting plate: Secure the mounting plate to the wall using the provided screws.
  6. Mount the holder: Attach the toilet roll holder to the secured mounting plate according to the specific product design.

Method 2: GROHE QuickGlue Installation (Sold Separately)

For an installation without drilling, the GROHE QuickGlue system can be used. This requires the purchase of a GROHE QuickGlue set (part number 41127000 for accessories with one mounting plate).

  • Surface compatibility: QuickGlue is suitable for tiles, stone, glass, concrete, plastic, or metal surfaces.
  • Preparation: Ensure the mounting surface is thoroughly clean, dry, and free of dust or grease.
  • Application: Follow the specific instructions provided with the GROHE QuickGlue set for applying the adhesive to the mounting plate.
  • Attachment: Press the mounting plate firmly onto the desired wall location and hold for the recommended time.
  • Curing: Allow the glue to cure for the specified duration before attaching the toilet roll holder to the mounting plate.
  • Removal: The QuickGlue system allows for removal of the mounting plate without leaving residue, if done correctly.
Technical drawing with dimensions for GROHE 41179000 toilet roll holder

Image: Technical drawing illustrating the dimensions of the GROHE 41179000 toilet roll holder, including width (6 9/16" or 167mm) and height (4 11/16" or 119mm).

Operation

To use the GROHE Start toilet roll holder, simply lift the cover, place a standard toilet paper roll onto the holder arm, and lower the cover. The design ensures easy roll replacement and secure holding.

Maintenance and Cleaning

To maintain the pristine appearance and functionality of your GROHE toilet roll holder, follow these simple cleaning guidelines:

  • Regular Cleaning: Wipe down the surface with a soft, dry cloth. This is often sufficient for daily maintenance.
  • Stubborn Marks: For more stubborn marks, use a mild soap solution and a soft cloth. Rinse thoroughly with clean water and dry immediately with a soft cloth to prevent water spots.
  • Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based products, or cleaners containing acids, alcohol, or bleach. These can damage the GROHE Long-Life Shine coating and void your warranty.
  • GROHE Long-Life Shine: The durable, easy-to-clean GROHE Long-Life Shine coating is designed to sparkle for years with proper care.

Troubleshooting

This product is designed for reliable performance. Should you encounter any issues, please review the installation steps to ensure correct setup. If problems persist, contact GROHE customer support for assistance.

Specifications

Brand GROHE
Model Number 41179000
Material 100% Metal
Finish Type Chrome
Installation Type Screw-In (QuickGlue option available, sold separately)
Included Components Toilet roll holder with cover
Item Dimensions (L x W) 6.57" x 1.77" (167mm x 45mm)
Item Weight 0.48 Kilograms
Roll Quantity 1
Product Style Modern
Shape Rectangular

Warranty and Support

Manufacturer's Warranty

This GROHE product is covered by a 5 Year Manufacturer's Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service.

Customer Support

For further assistance, technical support, or warranty inquiries, please visit the official GROHE website or contact their customer service department. Contact details can typically be found on the GROHE website or product packaging.

Official GROHE Website: www.grohe.com

© 2023 GROHE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.