1. Introduction
Thank you for choosing the VASAGLE Nightstand with Adjustable LED Strip. This modern and versatile piece of furniture is designed to enhance your living space with both style and functionality. Please read this manual carefully before assembly and use to ensure proper installation and safe operation. Keep this manual for future reference.

Image 1.1: The VASAGLE Nightstand with its LED strip illuminated, positioned next to a bed.
2. Safety Instructions
- Always follow the assembly instructions carefully.
- Do not allow children to climb on or play with the nightstand to prevent injury.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten if necessary.
- Do not exceed the maximum load capacity of 110 kg for the entire unit.
- Place the nightstand on a flat, stable surface to prevent tipping.
- Keep electrical components (LED strip, adapter) away from water and moisture.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged.
- 1 x VASAGLE Nightstand (disassembled components)
- 1 x Assembly Kit (includes screws, dowels, tools)
- 1 x Instruction Manual (this document)
- 1 x LED Strip with remote control
- 1 x Power Adapter with 1.8m cable
4. Setup and Assembly
Assembly is designed to be straightforward with clear instructions and numbered parts. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Unpack Components: Carefully remove all parts from the packaging and lay them out. Check against the parts list in the included assembly guide.
- Assemble Frame: Follow the step-by-step diagrams in the separate assembly guide to construct the main frame of the nightstand. Ensure all connections are secure.
- Install Drawers: Assemble the three drawers according to the instructions. Insert the drawer slides into the main frame and then slide the assembled drawers into place.
- Attach LED Strip: Secure the LED strip in the designated groove or area as shown in the assembly guide. Connect the LED strip to the power adapter.
- Final Placement: Once fully assembled, place the nightstand in its desired location.

Image 4.1: Detail of the drawer slide mechanism, ensuring smooth operation.

Image 4.2: The base of the nightstand, designed for stability and floor protection.
5. Operating Instructions
5.1 LED Lighting System
The integrated LED strip offers customizable lighting options to suit your mood and environment.
- Power On/Off: Plug the power adapter into a standard electrical outlet. Use the included remote control to turn the LED lights on or off.
- Color Selection: Choose from 25 available colors using the color buttons on the remote.
- Brightness Adjustment: Adjust the light intensity with 6 levels of brightness.
- Mode Selection: Select from 3 dynamic lighting modes (e.g., fade, jump, strobe) and 6 flashing frequencies to create different effects.

Image 5.1: Connecting the power adapter for the LED lighting system.

Image 5.2: Visual representation of the LED strip's customizable colors, brightness, and modes.
5.2 Drawer Usage
The nightstand is equipped with three spacious drawers for convenient storage.
- Opening/Closing: Gently pull or push the drawers to open and close them. Avoid forcing the drawers.
- Storage Capacity: The top drawer has a maximum static load capacity of 2.3 kg, and the lower drawers have a maximum static load capacity of 3.4 kg each. Do not overload the drawers.

Image 5.3: The nightstand with drawers open, demonstrating storage capacity and LED illumination.
6. Maintenance
To keep your VASAGLE Nightstand in optimal condition, follow these simple maintenance guidelines:
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the wood particleboard.
- Scratch Resistance: The surface is designed to be scratch-resistant, but avoid dragging sharp objects across it.
- Fasteners: Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.

Image 6.1: Instructions for cleaning with a damp cloth and demonstrating the scratch-resistant surface.
7. Troubleshooting
If you encounter any issues with your nightstand, refer to the following common problems and solutions:
- LED Lights Not Working:
- Ensure the power adapter is securely plugged into both the LED strip and a working electrical outlet.
- Check the remote control battery.
- Verify that the LED strip connection is firm.
- Drawers Are Stiff or Not Closing Properly:
- Check for any obstructions inside the drawer or along the slides.
- Ensure the drawer slides are correctly installed and aligned.
- Verify that the nightstand is placed on a level surface. Uneven surfaces can cause misalignment.
- Unit Feels Unstable:
- Re-tighten all assembly screws and fasteners.
- Ensure the nightstand is on a flat and stable floor.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | LET630T56V1 |
| Dimensions (D x W x H) | 35 x 40 x 55 cm (13.8 x 15.7 x 21.7 inches) |
| Item Weight | 15.4 kg (34 lbs) |
| Total Max. Load Capacity | 110 kg (242.5 lbs) |
| Top Drawer Max. Load Capacity | 2.3 kg (5.1 lbs) |
| Lower Drawer Max. Load Capacity | 3.4 kg (7.5 lbs) |
| Material | Particleboard, Metal |
| LED Colors | 25 |
| LED Brightness Levels | 6 |
| LED Modes | 3 (with 6 flashing frequencies) |
| Number of Drawers | 3 |
| Color | Black Wood Grain |

Image 8.1: Detailed dimensions and weight capacity of the nightstand and its drawers.
9. Warranty and Support
VASAGLE products are manufactured with quality and durability in mind. For information regarding warranty coverage, product support, or to purchase replacement parts, please visit the official VASAGLE website or contact customer service through your retailer.
Please have your model number (LET630T56V1) and purchase date available when contacting support.
Contact Information:
Refer to your purchase documentation or the VASAGLE official website for the most up-to-date customer service contact details.





