Introduction
The Peakeep Digital Alarm Clock (Model MHP6010) is designed for bedroom use, featuring large LED numbers, a loud alarm with volume control, adjustable display brightness, a USB charging port, and battery backup. It is ideal for heavy sleepers, seniors, or anyone needing a clear, reliable time display.
Setup Guide
Powering Your Clock
Your Peakeep Digital Alarm Clock operates primarily via the included AC/DC adapter. For backup functionality during power outages, it requires 2 AAA batteries (not provided).
- Connect the provided AC/DC adapter to the DC 5V port on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock display will illuminate.
- Open the battery compartment on the back of the clock. Insert 2 AAA batteries, ensuring correct polarity (+/-). These batteries will preserve your time and alarm settings and activate the alarm in case of a power interruption.
Back panel of the clock showing power input, USB port, and battery compartment.
The clock's battery backup ensures the alarm functions even during power outages.
Operating Instructions
Setting the Time
- Press and hold the TIME SET button on the back of the clock for 2 seconds. The hour digits will begin to flash.
- Use the VOL+ or VOL- buttons to adjust the hour.
- Press TIME SET again to confirm the hour and move to minute setting. The minute digits will flash.
- Use the VOL+ or VOL- buttons to adjust the minutes.
- Press TIME SET one more time to save the time and exit time setting mode.
Setting the Alarm
- Press and hold the ALARM SET button on the back of the clock for 2 seconds. The alarm hour digits will begin to flash.
- Use the VOL+ or VOL- buttons to adjust the alarm hour.
- Press ALARM SET again to confirm the alarm hour and move to alarm minute setting. The alarm minute digits will flash.
- Use the VOL+ or VOL- buttons to adjust the alarm minutes.
- Press ALARM SET one more time to save the alarm time.
- To turn the alarm ON or OFF, press the AL ON/OFF button. A bell icon will appear on the display when the alarm is active.
Adjusting Alarm Volume
The clock offers 5 levels of alarm volume control, allowing you to set it from a gentle sound for light sleepers to a very loud sound for heavy sleepers.
- While the alarm is sounding, or during alarm setup, repeatedly press the VOL+ or VOL- buttons to cycle through the 5 volume levels (U01 to U05).
- Select the desired volume level.
Adjust the alarm volume from U01 (low) to U05 (loud) to suit your preference.
Using the Snooze Function
When the alarm sounds, gently tap the large SNOOZE bar on top of the clock. This will pause the alarm for 9 minutes. The alarm will sound again after 9 minutes. To turn off the alarm completely, press any other button on the back of the clock.
The touch-sensitive snooze bar allows for easy activation even when groggy.
Adjusting Display Brightness
The clock features 5 different brightness settings (L01-L05) and an OFF option to ensure optimal visibility in various lighting conditions and to promote better sleep.
- Repeatedly press the DIMMER button on the back of the clock to cycle through the brightness levels.
- Select the desired brightness (L05 being brightest, L01 being dimmest, and OFF for no display).
Customize the display brightness for eye comfort day and night.
Changing 12/24 Hour Format
You can switch between 12-hour (with AM/PM indicator) and 24-hour time formats.
- Press the 12/24HR button on the back of the clock to toggle between the two formats.
Easily switch between 12-hour and 24-hour time display.
Daylight Saving Time (DST) Adjustment
The clock supports easy adjustment for Daylight Saving Time.
- Press the DST ON/OFF button on the back of the clock to adjust the time forward or backward by one hour.
Toggle Daylight Saving Time with a dedicated button.
USB Charging Port
The clock includes a USB charging port (5V-1A) on the back, allowing you to conveniently charge your smartphone or other USB-powered devices directly from the clock.
Charge your devices conveniently using the integrated USB port.
Maintenance
Cleaning
To maintain the appearance and functionality of your clock, wipe it regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface.
Battery Replacement
If the clock experiences frequent power outages or if the display flickers during power fluctuations, it may be time to replace the 2 AAA backup batteries. Ensure the clock is connected to AC power before replacing batteries to avoid losing settings.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is off or flickering. | No power, loose adapter connection, power outage. | Ensure AC adapter is securely plugged into the clock and wall outlet. Check power supply. If power outage, ensure backup batteries are installed. |
| Alarm does not sound. | Alarm not activated, volume too low. | Press the AL ON/OFF button to activate the alarm (bell icon should appear). Increase alarm volume using VOL+. |
| Display is too bright or too dim. | Brightness setting is not optimal. | Press the DIMMER button repeatedly to cycle through brightness levels until desired level is reached. |
| Time is incorrect. | Time not set correctly, power interruption without backup batteries. | Reset the time following the "Setting the Time" instructions. Ensure backup batteries are installed for power outage protection. |
| USB charging not working. | Device not compatible, cable issue, clock not powered. | Ensure the clock is powered by the AC adapter. Try a different USB cable or device. The USB port provides 5V-1A output. |
Product Specifications
| Feature | Detail |
|---|---|
| Brand | Peakeep |
| Model Number | MHP6010 |
| Color | White |
| Display Type | LED |
| Product Dimensions | 7"W x 3.3"H (approx. 17.8 cm W x 8.4 cm H) |
| Item Weight | 6.4 ounces (approx. 181 grams) |
| Power Source | Corded Electric (AC/DC adapter included) |
| Battery Backup | 2 AAA batteries required (not included) |
| USB Charging Port | 1 USB charging port (5V-1A output) |
| Display Brightness | 5 adjustable levels + OFF |
| Alarm Volume | 5 adjustable levels |
| Snooze Duration | 9 minutes |
| Time Format | 12-hour / 24-hour selectable |
| Material | Plastic |
Product dimensions for easy placement.
Warranty and Support
For detailed warranty information and customer support, please refer to the official user manual provided with your product or visit the Peakeep official website. A digital version of the user manual can be found here.
Peakeep is committed to providing quality products and excellent customer service. If you encounter any issues or have questions regarding your alarm clock, please consult the full user manual or contact Peakeep customer support directly.
