Wireless Express Aqua Jams Floating Speaker & Cup Holder (Duck) Instruction Manual

Introduction

The Wireless Express Aqua Jams Floating Speaker & Cup Holder is designed to enhance your aquatic experiences with music and convenience. This waterproof Bluetooth speaker features a unique duck design, providing both audio entertainment and a practical cup holder for various water environments.

Key features include:

• Waterproof Bluetooth speaker with clear sound.
• Removable speaker doubles as a floatie cup holder.
• Suitable for pools, beaches, lakes, jacuzzis, baths, and showers.
• Easy Bluetooth connectivity.
• Compact and lightweight design for portability.

What's in the Box

Upon unboxing your Aqua Jams Floating Speaker & Cup Holder, please ensure all components are present:

• Aqua Jams Floating Speaker (Duck design)
• Inflatable Cup Holder (Duck design)
• USB Charging Cable
• Instruction Manual

Setup

1. Inflating the Cup Holder

Locate the air valve on the inflatable duck cup holder. Use a suitable pump (not included unless specified) or your mouth to inflate the float until it is firm but not overinflated. Ensure the valve is securely closed after inflation to prevent air leakage.

Image: The Aqua Jams Floating Speaker in its duck-shaped inflatable cup holder, ready for use with a beverage.

2. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the charging port on the speaker (usually located under a protective flap to ensure waterproofing). Connect the other end to a USB power source. The charging indicator light will show the charging status and turn off when fully charged. A full charge provides approximately 8 hours of playback.

3. Inserting the Speaker into the Float

Once the cup holder is inflated and the speaker is charged, gently place the speaker into the central opening of the duck-shaped float. Ensure it sits snugly and securely.

Image: The Aqua Jams Floating Speaker placed within its duck-shaped inflatable cup holder, showing the speaker grille.

Operating Instructions

1. Power On/Off

Press and hold the power button (usually marked with a universal power symbol) on the speaker's control panel for a few seconds until you hear an audible prompt or see an indicator light. Repeat to power off.

2. Bluetooth Pairing

After powering on, the speaker will automatically enter Bluetooth pairing mode (indicated by a flashing LED). On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Aqua Jams" or a similar device name. Select it to connect. You will hear a confirmation tone once paired.

3. Music Playback and Volume Control

Once paired, you can play music from your connected device. Use the speaker's control buttons (Play/Pause, Next/Previous Track) or your device to manage playback. Adjust volume using the dedicated volume buttons on the speaker or your device.

4. LED Lights

The speaker features LED lights for ambiance. Press the light button (often marked with a lightbulb symbol) to cycle through different light modes or turn them off. The lights may sync with the music for an enhanced experience.

5. Answering Calls

If your device is paired, you can answer incoming calls directly from the speaker using the call button (often marked with a phone symbol). The built-in microphone allows for hands-free communication.

Maintenance

• Cleaning: Wipe the speaker and float with a damp cloth. Do not use harsh chemicals or abrasive cleaners.
• Drying: After use in water, ensure the speaker is thoroughly dried. If water enters the speaker grille and muffles the sound, gently shake the speaker upside down to expel the water.
• Storage: Store the speaker in a cool, dry place away from direct sunlight when not in use. Deflate the cup holder for compact storage.
• Charging Port: Always ensure the charging port's protective flap is securely closed when the speaker is near water to maintain its waterproof integrity.

Troubleshooting

• Speaker not turning on: Ensure the battery is charged. Connect to a power source and try again.
• Unable to pair via Bluetooth:
  1. Ensure the speaker is in pairing mode (flashing LED).
  2. Check that Bluetooth is enabled on your device.
  3. Move your device closer to the speaker.
  4. Forget the device from your phone's Bluetooth settings and try pairing again.
• No sound or muffled sound:
  1. Check the volume levels on both the speaker and your connected device.
  2. Ensure the speaker is properly paired.
  3. If used in water, shake out any trapped water from the speaker grille.
• LED lights not working: Press the light button to cycle through modes. Ensure the speaker is powered on.
• Float losing air: Check the air valve for a secure seal. Inspect the inflatable for any punctures.

Specifications

Warranty and Support

This product comes with a Limited Warranty. For specific details regarding warranty coverage and duration, please refer to the documentation included with your purchase or contact Wireless Express customer support.

For technical assistance, troubleshooting, or any other inquiries, please visit the Wireless Express Store on Amazon or contact their customer service directly.

Return Policy: A 30-day refund/replacement policy is typically offered. Please check your purchase details for exact terms.