Homemory HPILLAR

Homemory Gray Flickering Flameless Candles User Manual

Model: HPILLAR

Introduction

Thank you for choosing Homemory Gray Flickering Flameless Candles. This set of battery-operated LED pillar candles provides a realistic flickering effect, enhancing the ambiance of any space without the hazards of traditional flames. Designed for safety and convenience, these candles are ideal for home decoration, parties, and festive occasions.

The transparent acrylic shells offer durability and a modern aesthetic, preventing breakage and melting concerns associated with glass or wax in direct sunlight. Enjoy a smoke-free, flame-free, and drip-free experience, making them safe for households with children and pets.

Set of five Homemory gray flickering flameless candles with two remote controls.

Image: The Homemory Gray Flickering Flameless Candles set, including five candles of varying heights and two remote controls.

Package Contents

  • 5 x Gray LED Flameless Candles (3"x4", 3"x5", 3"x6", 3"x8", 3"x8")
  • 2 x Remote Controls
  • 1 x User Manual (this document)

Note: 2 AA batteries are required for each candle and are not included in the package.

Setup

  1. Insert Batteries into Candles:

    Locate the battery compartment at the bottom of each candle. Insert two (2) AA batteries into each candle, ensuring correct polarity (+/-). Close the battery compartment securely.

    Important Note on Batteries: While standard disposable alkaline AA batteries fit perfectly, some high-capacity rechargeable AA batteries (e.g., NiMH cells) may have a slightly larger girth. This can prevent the circular base cover from snapping securely into place. If using such rechargeable batteries, you may need to apply a small piece of durable tape to the underside of the base cover to ensure it remains closed and maintains proper battery contact.

  2. Activate Remote Control:

    Before first use, remove the clear plastic insulation tab from the battery compartment of the remote control. This activates the remote's battery.

    Diagram showing the remote control functions and the varying sizes of the flameless candles.

    Image: Remote control layout with buttons for ON/OFF, timer settings, light modes, and brightness adjustment. Also shows the five candle sizes: 3"x4", 3"x5", 3"x6", 3"x8", 3"x8".

Operating Instructions

Your Homemory flameless candles are controlled by the included 10-key remote. Ensure the remote is pointed towards the candles for optimal response.

  • ON/OFF: Press the ON button to turn the candles on. Press the OFF button to turn them off.
  • Timer Function: Select a timer setting (2H, 4H, 6H, 8H). Once activated, the candles will remain on for the selected duration and then automatically turn off. They will then automatically turn on at the same time the next day, operating in a 24-hour cycle. To cancel the timer, press the OFF button.
  • Light Mode:
    • "Candle" Mode: Activates the realistic flickering flame effect.
    • "Light" Mode: Provides a steady, non-flickering glow.
  • Brightness Adjustment: Use the + button to increase brightness and the - button to decrease brightness.

Video: An official Homemory video demonstrating the Grey Acrylic Flameless Candles set of 5, showcasing their appearance and features.

Maintenance

  • Battery Replacement: When the candles dim or the remote becomes unresponsive, replace the batteries in the affected unit(s). Always use fresh AA batteries for the candles and a new CR2025 coin cell battery for the remote (if applicable, check remote for battery type).
  • Cleaning: Wipe the candle surfaces and acrylic shells with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
  • Storage: If storing the candles for an extended period, remove all batteries to prevent leakage and damage. Store in a cool, dry place away from direct sunlight.

Troubleshooting

ProblemPossible CauseSolution
Candles do not turn on.
  • Batteries are dead or inserted incorrectly.
  • Remote control battery is dead or insulation tab not removed.
  • Remote is out of range or not pointed at candles.
  • Replace AA batteries in candles, ensuring correct polarity.
  • Remove insulation tab from remote or replace remote battery.
  • Ensure remote is within 10-16 feet and pointed directly at the candles.
Timer function is not working correctly.
  • Timer was not set properly.
  • Interference from other IR devices.
  • Press the OFF button to cancel any previous timer setting, then re-select the desired timer duration.
  • Move candles away from other devices that use infrared remote controls.
Candles flicker inconsistently or dim.
  • Low battery power.
  • Replace AA batteries in the affected candles.

Specifications

FeatureDetail
Model NumberHPILLAR
BrandHomemory
ColorGray
Number of Items5
Candle Dimensions (Diameter x Height)3"D x 4", 3"D x 5", 3"D x 6", 3"D x 8", 3"D x 8"
MaterialAcrylic (Shell), LED (Light Source)
Light Source TypeLED
Power SourceBattery Powered (2 x AA batteries per candle, not included)
Battery Life500+ hours (with quality AA batteries)
Control MethodRemote Control (IR)
Voltage3 volts
Indoor/Outdoor UsageIndoor
Additional FeaturesDimmable, Timer Function (2H/4H/6H/8H), Flickering/Steady Light Modes

Warranty & Support

Homemory products are designed for quality and reliability. For any questions, concerns, or support needs regarding your flameless candles, please contact Homemory customer service. Please refer to the product packaging or the Homemory official website for the most current contact information and warranty details.

You can also visit the Homemory Store on Amazon for more information and product offerings.

© 2026 Homemory. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.