Introduction
Thank you for choosing the Baseus Qpow2 10000mAh Power Bank. This portable charger is designed to provide reliable and fast charging for your mobile devices, featuring built-in cables for convenience and a compact design for portability. Please read this manual carefully to ensure proper use and maintenance of your device.
Figure 1: Baseus Qpow2 10000mAh Power Bank with built-in cables and LED display.
Product Features
- Integrated Charging Technology: Built-in 22.5W USB-C and Lightning cables for universal compatibility.
- 22.5W Fast Charging: Delivers rapid charging for compatible devices, such as iPhone 14 (up to 1.8 times) and Samsung S23 (up to 1.5 times) with the 10000mAh capacity.
- Multi-Device Support: Charge up to four devices simultaneously using the built-in cables, 22.5W USB-C output, 20W Lightning output, and additional USB-C and USB-A ports.
- Enhanced Safety Features: Equipped with smart chips for protection against overcharge, over-discharge, overvoltage, electromagnetic interference, overtemperature, overcurrent, overpower, and short circuits.
- Travel-Ready Design: Lightweight and slim profile (4.52 x 2.83 x 0.78 inches, 0.54 lb) for easy portability. Features an LED digital display for battery status.
Figure 2: The power bank's compact dimensions (4.52*2.83*0.78 inches) and light weight (8.5 oz) make it highly portable.
Figure 3: The integrated cable doubles as a lanyard for easy carrying and storage.
Figure 4: The 10000mAh capacity provides ample power for daily use, capable of charging an iPhone 13/14 approximately 1.8 times.
Setup
Initial Charging
Before first use, fully charge your Baseus Qpow2 Power Bank. Connect the power bank to a power source using a compatible USB-C cable (not included for input, but the built-in USB-C cable can be used for output). The LED display will show the charging progress.
The power bank supports 18W USB-C input for recharging.
Figure 5: The USB-C port supports both 20W output and 18W input for recharging the power bank.
Operating Instructions
Charging Devices
The Baseus Qpow2 Power Bank offers multiple ways to charge your devices:
- Using Built-in Cables:
- USB-C Cable: Pull out the built-in USB-C cable and connect it to your USB-C compatible device.
- Lightning Cable: Pull out the built-in Lightning cable and connect it to your Apple device.
- Using USB Ports:
- USB-C Port: Connect your device's USB-C charging cable to the power bank's USB-C port.
- USB-A Port: Connect your device's USB-A charging cable to the power bank's USB-A port.
The power bank will automatically detect the connected device and begin charging. The LED display will show the remaining battery percentage.
Figure 6: The power bank can charge up to four devices simultaneously using its various output options.
Figure 7: The power bank features built-in Lightning and USB-C cables for convenient charging.
Maintenance
- Keep the power bank away from extreme temperatures, direct sunlight, and moisture.
- Do not drop, disassemble, or attempt to repair the device yourself.
- Clean the surface with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the power bank in a cool, dry place when not in use for extended periods. It is recommended to charge it to about 50% capacity before long-term storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging | Charging cable or adapter faulty; power bank fully charged; power source issue. | Check charging cable and adapter. Ensure power source is active. If fully charged, LED will show 100%. |
| Device not charging from power bank | Power bank battery low; device cable faulty; device not compatible; power bank in standby. | Check power bank battery level. Try a different charging cable. Ensure device is compatible. Press power button to activate if in standby. |
| Slow charging | Cable not supporting fast charging; device not supporting fast charging; multiple devices charging. | Use a fast-charging compatible cable. Ensure your device supports fast charging. Charging multiple devices simultaneously may reduce individual charging speeds. |
| LED display not working | Device malfunction. | Contact customer support if the issue persists after trying basic troubleshooting. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | LFZ107 |
| Battery Capacity | 10000 Milliamp Hours (mAh) |
| Product Dimensions | 13.8 x 3.2 x 9.6 cm (5.43 x 1.26 x 3.78 inches) |
| Item Weight | 320 g (0.71 lbs) |
| Input (USB-C) | 18W |
| Output (Built-in USB-C Cable) | 22.5W |
| Output (Built-in Lightning Cable) | 20W |
| Output (USB-C Port) | 20W |
| Output (USB-A Port) | 12W |
| Special Features | Travel, Fast Charging, LED Display, Over Charging Protection, Short Circuit Protection, Charge 4 at Once |
| Color | Black |
Warranty and Support
The Baseus Qpow2 Power Bank comes with an 18-month warranty. For warranty claims or technical support, please contact Baseus customer service through their official website or the retailer where you purchased the product.
For more information and support, visit the official Baseus store: Baseus Official Store
