Introduction
Thank you for choosing the Summerset 15-Inch UL Outdoor Rated Ice Maker (Model SSIM-15). This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new ice maker. Please read this manual thoroughly before installation and use, and retain it for future reference.
This durable, outdoor-rated ice maker is constructed of #304 stainless steel with front venting, making it suitable for built-in kitchen islands or freestanding applications. It is designed to produce up to 50 lbs of ice daily and features an automatic shutoff when its 25 lb capacity ice bin is full.
Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, or injury.
- Read all instructions before using the appliance.
- Connect to a properly grounded outlet only.
- Do not operate if the power cord is damaged.
- Keep ventilation openings clear of obstructions.
- Do not touch the evaporator when operating.
- Ensure proper water supply and drainage connections.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Product Overview
The Summerset SSIM-15 Ice Maker is designed for reliable outdoor ice production. Familiarize yourself with its components:
Figure 1: Front View of the Ice Maker. This image shows the sleek stainless steel exterior of the Summerset SSIM-15 ice maker, featuring a full-length door and a front-venting grille at the bottom for efficient heat dissipation.
Figure 2: Interior View with Door Open. This image displays the interior of the ice maker with the door ajar, revealing the ice production mechanism at the top and the removable ice storage bin below. A warning label is visible on the right side.
Figure 3: Control Panel. A detailed view of the ice maker's control panel, featuring indicator lights for "ICE HARVEST" and "BIN FULL," along with four circular buttons labeled "ON/OFF," "CLEAN," "ADJUST," and "MODE."
Figure 4: Door Handle. This close-up image highlights the sleek, cylindrical stainless steel handle attached vertically to the ice maker's door, designed for easy opening and closing.
Setup and Installation
Location Requirements:
- Place the unit on a flat, level surface capable of supporting its weight (86 lbs).
- Ensure adequate ventilation around the unit, especially the front grille.
- Avoid direct sunlight or heat sources.
- This unit is UL Outdoor Rated, suitable for outdoor environments.
Electrical Connection:
- Connect to a dedicated 120 Volt, 60 Hz, 15 Amp grounded electrical outlet.
- Do not use extension cords or adapter plugs.
Water Supply Connection:
- Connect the included water supply hose to a potable water source with a pressure between 20-80 PSI.
- Ensure all connections are secure and leak-free.
Drainage:
- This unit features a gravity drain. Ensure the drain hose is routed to a floor drain or suitable receptacle lower than the unit's drain outlet to allow for proper water removal.
Operating Instructions
Initial Startup:
- After installation, plug in the unit.
- Press the "ON/OFF" button on the control panel to turn the unit on. The "ICE HARVEST" indicator light may illuminate.
- Allow several hours for the first batch of ice to be produced. Discard the first few batches of ice to ensure cleanliness.
Ice Production:
- The ice maker will automatically produce ice until the storage bin reaches its 25 lb capacity.
- The "BIN FULL" indicator light will illuminate when the bin is full, and ice production will pause.
- Once ice is removed, production will resume automatically.
Control Panel Functions (Refer to Figure 3):
- ON/OFF: Powers the unit on or off.
- CLEAN: Initiates the cleaning cycle (see Maintenance section).
- ADJUST: Used to modify ice thickness or cycle time (refer to full manual for detailed adjustment procedures).
- MODE: Switches between different operating modes if available (e.g., ice production, standby).
Maintenance and Cleaning
Regular Cleaning:
- Exterior: Clean the stainless steel exterior with a soft cloth and mild detergent. Do not use abrasive cleaners.
- Ice Bin: Regularly remove and clean the ice storage bin with warm, soapy water. Rinse thoroughly.
- Air Filter/Ventilation: Periodically clean the front grille and ensure air circulation is not obstructed.
Internal Cleaning Cycle:
It is recommended to run an internal cleaning cycle every 3-6 months, or more frequently depending on water quality and usage.
- Empty the ice bin.
- Add a recommended ice maker cleaning solution (e.g., citric acid-based cleaner) to the water reservoir as per cleaner instructions.
- Press the "CLEAN" button on the control panel to start the cycle.
- Once the cycle is complete, drain the cleaning solution and rinse the system by running a few cycles with fresh water, discarding the ice produced during rinsing.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; tripped breaker. | Check power cord connection; reset circuit breaker. |
| No ice production. | No water supply; water valve closed; bin full sensor activated. | Ensure water supply is connected and valve is open; check for obstructions in water line; empty ice bin. |
| Ice production is slow or ice is thin. | High ambient temperature; poor ventilation; dirty condenser. | Ensure proper ventilation; clean condenser coils; adjust ice thickness setting if available. |
| Water leaks. | Loose water connections; clogged drain. | Tighten all water supply and drain connections; clear any drain obstructions. |
For issues not listed here, please contact customer support.
Specifications
- Model: SSIM-15
- Brand: Summerset Grills
- Daily Ice Output: 50 lbs
- Ice Storage Capacity: 25 lbs
- Voltage: 120 Volts
- Refrigerant: R134a
- Material: #304 Stainless Steel
- Product Dimensions (H x W x D): 33.15 x 14.57 x 23.35 inches
- Item Weight: 86 lbs
- Drain Type: Gravity Drain
- Temperature Control: Not Necessary (Automatic)
Warranty and Customer Support
For warranty information, please refer to the warranty card included with your product or visit the official Summerset Grills website. Keep your proof of purchase for warranty claims.
If you require technical assistance, parts, or have questions regarding your Summerset Ice Maker, please contact Summerset Grills customer support. Contact details can typically be found on the manufacturer's website or in your product packaging.
Online Resources: Visit the Summerset Grills Store on Amazon
