Emeril Everyday Cordless Immersion Hand Blender User Manual

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed, including:

• Read all instructions carefully before operating the appliance.
• To protect against electrical shock, do not immerse the motor assembly, charging base, or charging cable in water or other liquids.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner. Contact customer service for examination, repair, or adjustment.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Always attach the blending shaft or attachments to the motor assembly before inserting the plug into the outlet (for corded use, though this is cordless, it applies to assembly).
• When blending, keep hands and utensils out of the container to prevent the possibility of severe injury to persons or damage to the unit. A scraper may be used but must be used only when the unit is not running.
• Blades are sharp. Handle carefully.
• Do not use the appliance for other than intended use.
• This appliance is intended for household use only.

Parts & Accessories

Familiarize yourself with all components of your Emeril Everyday Cordless Immersion Hand Blender:

• A. Motor Assembly: The main power unit with controls and battery.
• B. Immersion Blending Shaft: Stainless steel shaft with sharp blades for blending.
• C. Whisk Attachment: For whipping and aerating ingredients.
• D. Double Beater Attachment: For mixing and beating ingredients.
• E. Charging Base: Docking station for charging the motor assembly.
• F. Charging Cable: USB cable for connecting the charging base to a power source.
• G. Beaker: A measuring cup for blending and mixing.

Image: All components of the Emeril Everyday Cordless Immersion Hand Blender.

Before First Use

1. Unpack: Carefully remove all components from the packaging. Retain the packaging for future storage or transport.
2. Clean: Wash the Immersion Blending Shaft, Whisk Attachment, Double Beater Attachment, and Beaker in warm, soapy water. Rinse thoroughly and dry. The Motor Assembly and Charging Base should only be wiped clean with a damp cloth. Do not immerse them in water.
3. Charge: Before initial use, fully charge the Motor Assembly. Place the Motor Assembly onto the Charging Base. Connect the Charging Cable to the Charging Base and plug the other end into a suitable USB power adapter (not included) or USB port. The indicator light on the Motor Assembly will illuminate during charging and change color or turn off when fully charged. A full charge may take several hours.

Image: The motor assembly placed on its charging base for charging.

Setup

Proper assembly ensures safe and effective operation.

1. Attaching the Immersion Blending Shaft: Align the blending shaft with the motor assembly and twist clockwise until it locks securely into place. Ensure it is firmly attached before use.
2. Attaching Whisk or Double Beater: Insert the desired attachment into its respective housing, then align the housing with the motor assembly and twist clockwise until it locks securely.

Image: The immersion blending shaft, ready for attachment to the motor unit.

Operating Instructions

Follow these steps for safe and efficient use of your cordless immersion hand blender.

1. Charging: Ensure the motor assembly is sufficiently charged before use. A fully charged unit provides optimal performance.
2. Safety Lock: The blender features a safety lock mechanism. To activate the blender, first press and hold the unlock button (often indicated by a padlock icon) located on the handle. While holding the unlock button, press the power button to begin operation. Release the power button to stop.
3. Speed Control: The motor assembly features a variable speed dial. Rotate the dial to adjust the blending speed according to your needs. Start with lower speeds for delicate tasks and increase for tougher ingredients.
4. Immersion Blending: For best results, immerse the blending shaft into the ingredients before starting the motor. Use an up-and-down motion to ensure thorough blending. Do not operate the blender continuously for more than 1 minute to prevent overheating. Allow it to cool down for several minutes between uses.
5. Whisking/Beating: Use the whisk or double beater attachment for whipping cream, beating eggs, or mixing batters. Ensure the attachment is fully immersed in the ingredients before starting.

Image: User operating the immersion hand blender with ingredients.

Image: Detailed view of the control panel on the motor assembly.

Cleaning & Maintenance

Regular cleaning and proper maintenance will extend the life of your appliance.

• Disconnect: Always ensure the appliance is turned off and disconnected from the charging base before cleaning.
• Motor Assembly & Charging Base: Wipe the motor assembly and charging base with a damp cloth. Do not immerse these parts in water or any other liquid.
• Attachments & Beaker: The Immersion Blending Shaft, Whisk Attachment, Double Beater Attachment, and Beaker are dishwasher safe (top rack only) or can be washed by hand in warm, soapy water. Rinse thoroughly and dry immediately.
• Stubborn Food: For stubborn food residue on the blending shaft, fill the beaker with warm, soapy water and operate the blender in the water for a few seconds. Then rinse under running water.
• Storage: Store the appliance and its attachments in a clean, dry place when not in use.

Troubleshooting

If you encounter issues with your Emeril Everyday Cordless Immersion Hand Blender, refer to the following common problems and solutions:

Specifications

Warranty & Support

This Emeril Everyday appliance comes with a full warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact Emeril Lagasse customer service directly. Keep your purchase receipt as proof of purchase for warranty purposes.