1. Introduction
This manual provides instructions for the BoxWave FineTouch Capacitive Stylus. This stylus is designed for use with capacitive touch screens, including the Mindray Z50, offering a precise and responsive interaction experience.
Image 1.1: The BoxWave FineTouch Capacitive Stylus shown alongside a Mindray Z50 device, illustrating its compatibility and intended use.
The FineTouch Capacitive Stylus features a clear disc tip for enhanced visibility and accuracy, a durable metal clip for portability, and a lightweight design for comfortable use. It operates without the need for Bluetooth pairing or batteries.
2. Setup
The BoxWave FineTouch Capacitive Stylus requires no complex setup. It is ready for immediate use upon removal from its packaging.
2.1 Unpacking
- Carefully remove the stylus from its packaging.
- Remove the protective cap from the stylus tip. The cap is threaded and can be twisted off.
Image 2.1: The stylus with its threaded cap removed, showing the clear disc tip designed for precision.
2.2 Initial Use
No pairing or power is required. Simply touch the clear disc tip gently to your device's capacitive touch screen to begin interaction.
3. Operating Instructions
The FineTouch Capacitive Stylus simulates the touch of your finger, providing enhanced precision for various tasks on your touch screen device.
3.1 Basic Operation
- Tapping: Lightly tap the clear disc tip on the screen to select items, open applications, or activate buttons.
- Swiping: Glide the stylus across the screen to scroll through content or navigate interfaces.
- Writing/Drawing: Use the stylus as you would a pen on paper for writing notes or creating drawings. The clear disc allows you to see exactly where your input is registered.
Image 3.1: A user demonstrating the natural writing and tapping motion with the stylus on a tablet.
3.2 Precision and Visibility
The unique clear disc tip is designed to improve precision by allowing you to see the exact point of contact on the screen. This is particularly useful for detailed work, such as fine drawing or precise selection.
Image 3.2: A detailed view of the clear disc tip, emphasizing its transparent design for accurate placement.
Important Note:
- This stylus does not support palm rejection. Avoid resting your palm on the screen while using the stylus if your device does not have built-in palm rejection technology.
- This stylus does not support pressure sensitivity. All inputs will be registered with uniform pressure.
4. Maintenance
Proper care will ensure the longevity and optimal performance of your BoxWave FineTouch Capacitive Stylus.
4.1 Cleaning
- Wipe the stylus body with a soft, dry, lint-free cloth.
- If the clear disc tip accumulates dust or debris, gently wipe it with a slightly damp cloth and then dry thoroughly. Avoid using harsh chemicals or abrasive materials.
4.2 Storage
When not in use, replace the threaded cap over the clear disc tip to protect it from damage and debris. The built-in metal clip allows for convenient attachment to pockets or cases.
Image 4.1: The stylus tip with the cap removed, illustrating the delicate clear disc that should be protected during storage.
5. Troubleshooting
If you encounter issues with your stylus, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stylus not responding | Dust or debris on the tip or screen; damaged tip. | Clean the stylus tip and device screen. Ensure the clear disc is intact and not bent or broken. |
| Inaccurate input | Improper angle of use; screen protector interference. | Hold the stylus at a comfortable, natural writing angle. Ensure your screen protector is clean and properly applied. |
| Stylus feels sticky or drags | Screen or tip is dirty. | Clean both the device screen and the stylus tip thoroughly. |
If the issue persists, please contact BoxWave customer support for further assistance.
6. Specifications
- Model: FineTouch Capacitive Stylus
- Compatibility: Universal for capacitive touch screens, including Mindray Z50
- Tip Type: Clear Disc Tip
- Material: Aluminum alloy body, plastic disc tip
- Weight: 1 ounce
- Dimensions: Standard pen size (approximate)
- Special Features: Integrated metal clip, threaded protective cap
7. Warranty and Support
BoxWave products are designed for quality and durability. For specific warranty details, please refer to the warranty information included with your purchase or visit the official BoxWave website.
For technical support or inquiries, please contact BoxWave customer service through their official channels. Contact information can typically be found on the product packaging or the BoxWave website.
Please note: This product includes limited 3rd party tech support for your device (up to 3 inquiries via messaging) - not affiliated with or endorsed by Mindray.
