1. Introduction
1.1 Product Overview
The AODELAN VRIR-B5000 VR Battery Pack with IR Light is designed to enhance your virtual reality experience by providing extended power and improved tracking in low-light conditions. This lightweight 5000mAh power bank is compatible with Oculus/Meta Quest 2 and Quest headsets, offering additional playtime and enabling VR gaming in dark environments through its integrated infrared (IR) light.
1.2 Key Features
- Extended Playtime: 5000mAh battery capacity provides 2-3 hours of additional VR playtime.
- Integrated IR Light: Enhances controller tracking sensitivity in dark rooms, allowing for VR use in complete darkness.
- Adjustable Brightness: Two IR light brightness modes support room sizes from 30-50 square meters.
- Compact and Lightweight Design: Minimizes added weight to the VR headset for comfortable use.
- U-shaped Design: Allows for comfortable use, even when lying down.
- Slide-in Attachment: Securely attaches to the VR headset without blocking the headphone jack.
2. Important Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or damage to the product.
- Keep the product out of reach of unauthorized persons and children.
- This product is not waterproof. Avoid exposure to water or other liquids.
- Do not disassemble, modify, or attempt to repair the device. This will void the warranty and may cause damage or injury.
- Avoid extreme temperatures, direct sunlight, and high humidity.
- Use only the provided charging cable or a certified USB-C cable for charging.
- Do not expose the battery pack to fire or dispose of it in fire.
- If the product shows signs of damage, overheating, or abnormal behavior, discontinue use immediately.
3. Package Contents
Verify that all items listed below are included in your package:
- AODELAN VRIR-B5000 VR Battery Pack with IR Light
- USB-C Charging Cable
- User Manual
4. Setup Guide
4.1 Attaching the Battery Pack to Your VR Headset
- Identify the USB-C port on your Oculus/Meta Quest 2 or Quest headset.
- Align the slide-in attachment of the AODELAN VRIR-B5000 battery pack with the side strap of your VR headset.
- Gently slide the battery pack onto the headset strap until it is securely in place. Ensure the USB-C connector on the battery pack aligns with the headset's charging port.
- Connect the integrated short USB-C cable from the battery pack into the VR headset's USB-C port.
5. Operating Instructions
5.1 Powering On/Off and Battery Indicator
- Power On: Press and hold the power button on the battery pack for approximately 2 seconds until the indicator lights illuminate.
- Power Off: Press and hold the power button for approximately 2 seconds until the indicator lights turn off.
- Battery Level Check: Briefly press the power button to see the current battery level indicated by the LED lights. Each light typically represents 25% charge.
5.2 Using the IR Light
The integrated IR light allows for accurate VR tracking in dark environments.
- Ensure the battery pack is powered on and connected to your VR headset.
- Locate the IR light control button on the battery pack.
- Press the IR light control button to cycle through brightness modes: Off, Brightness Level 1, Brightness Level 2.
- Select the appropriate brightness level for your room size. Brightness Level 1 is suitable for 30-40 m² rooms, and Brightness Level 2 for 40-50 m² rooms.
5.3 Charging the Battery Pack
To charge the AODELAN VRIR-B5000 battery pack:
- Disconnect the battery pack from your VR headset.
- Connect the provided USB-C charging cable to the charging port on the battery pack.
- Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a computer USB port.
- The LED indicator lights will show the charging status. They will typically blink while charging and become solid when fully charged.
6. Maintenance
6.1 Cleaning
- Ensure the device is powered off and disconnected from all power sources before cleaning.
- Use a soft, dry, lint-free cloth to wipe the surface of the battery pack.
- Do not use abrasive cleaners, solvents, or harsh chemicals.
6.2 Storage
- Store the battery pack in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, charge the battery pack to approximately 50% every three months to maintain battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery pack not turning on. | Battery is fully discharged. | Charge the battery pack using the provided USB-C cable. |
| VR headset not charging or receiving power. | Loose connection; Battery pack is off; Battery pack is discharged. | Ensure the USB-C cable is securely connected to both the battery pack and the VR headset. Power on the battery pack. Charge the battery pack if necessary. |
| IR light not working. | IR light is off; Battery pack is off or discharged. | Press the IR light control button to turn it on or cycle through brightness modes. Ensure the battery pack is powered on and has sufficient charge. |
| Short battery life. | High power consumption by VR headset; Battery degradation over time. | Ensure the battery pack is fully charged before use. Reduce VR headset brightness or other power-intensive settings if possible. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | VRIR-B5000 |
| Battery Capacity | 5000mAh |
| Item Weight | 7 ounces (approximately 198 grams) |
| Product Dimensions | 4.53 x 1.02 x 1.18 inches (approximately 11.5 x 2.6 x 3 cm) |
| Special Feature | IR Light for Low-Light Tracking |
| Connectivity Technology | USB-C |
| Compatible Devices | Oculus Quest 2, Meta Quest |
| Battery Type | Lithium Ion (included) |
9. Warranty and Support
9.1 Warranty Information
AODELAN products are manufactured to high quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.
9.2 Customer Support
For technical support, warranty inquiries, or further assistance, please contact AODELAN customer service through the retailer where the product was purchased or visit the official AODELAN store online.
AODELAN Official Store: Visit AODELAN Store
