Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your POOLHACKER 2025 Upgrade Pool Fountain. This innovative dual-spray water feature is designed to enhance your pool experience by providing both aesthetic appeal and functional benefits, such as water cooling and improved circulation. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
Important Safety Information
Always follow these safety precautions to reduce the risk of injury or damage:
- Read all instructions carefully before installing or operating the fountain.
- Ensure the pool pump is turned OFF and unplugged from the power source before performing any installation, maintenance, or troubleshooting.
- Adult supervision is required when children are near the pool and fountain.
- Do not attempt to modify the fountain or its components. Use only original POOLHACKER parts.
- Keep all electrical connections and power sources away from water.
- Do not operate the fountain if any part is damaged or broken.
Package Contents
Verify that all items listed below are included in your package:
- POOLHACKER Dual Spray Pool Fountain Unit
- Adapter for 1 ½” Inground Pool Return Jet
- Adapter for 1 ½” / 1 ¼” Above Ground Pool Inlet/Outlet Fittings
- Optional 3-inch Extension Tube
Setup and Installation
The POOLHACKER Pool Fountain is designed for easy installation. It connects directly to your pool's return jet, utilizing your existing pump for operation.
Compatibility
The fountain includes various adapters to ensure broad compatibility with most 1 ½” inground pool return jets and 1 ½” / 1 ¼” above-ground pool inlet/outlet fittings. Please refer to the diagrams below to confirm your pool's return fittings are compatible.
This image illustrates the types of pool return fittings that are compatible with the POOLHACKER fountain, including those for In-ground pools and various Above-ground pool types. It also shows examples of fittings that are not compatible.
This image highlights specific types of pool return fittings that are not compatible with the POOLHACKER fountain, such as threadless return inlets, non-Hayward return inlets for inground pools, and non-specified brand/size return inlets.
Installation Steps
- Turn off Pool Pump: Ensure your pool pump is turned OFF and disconnected from the power source before beginning installation.
- Locate Return Jet: Identify the return jet or inlet/outlet fitting in your pool where the fountain will be installed.
- Select Adapter: Choose the appropriate adapter for your specific pool type (inground or above-ground) from the included components.
- Assemble Fountain: Screw the main fountain unit onto the selected adapter.
- Attach to Pool: Securely attach the assembled fountain to your pool's return fitting. Hand-tighten to ensure a snug fit and prevent leaks.
- Use Extension Tube (if needed): If the fountain is submerged after installation, attach the optional 3-inch extension tube between the fountain unit and the adapter to raise its height above the water line for optimal spray.
This diagram shows how to use the optional 3-inch extension tube to prevent the fountain from being submerged, ensuring optimal spray performance.
Installation Video Guide
This video provides a visual guide to installing the POOLHACKER pool fountain and showcases its adjustable spray features.
Operation
Once installed, the POOLHACKER fountain is ready to operate. Its dual-spray design and adjustable features allow for a customized pool experience.
Adjusting Spray Direction and Height
The fountain features 360° adjustable horizontal and vertical tubes, allowing you to customize the spray direction and height to suit your preference and pool layout. You can achieve various effects, from a wide waterfall to a focused spray.
This image demonstrates the versatility of the fountain, allowing users to adjust the spray to create various effects, such as cross water or parallel spraying, to suit different pool sizes and shapes.
Water pressure and spray height can be further adjusted using the side valve located at the bottom of the unit. Rotate the valve to control the flow of water and achieve your desired spray intensity.
This diagram shows the three settings for the side valve: Full Open (Low Pressure), Partial Open (Medium Pressure), and Full Close (High Pressure), allowing precise control over the fountain's output.
Cooling and Relaxation Benefits
The dual spray design actively cools down your pool water temperature by approximately 6-10 degrees Fahrenheit, providing a refreshing experience on hot days. Additionally, the gentle sound of falling water creates a soothing ambiance, contributing to a relaxing environment.
This image depicts the relaxing ambiance created by the fountain, highlighting its stress-relieving benefits through the sound of falling water.
Maintenance
Regular maintenance will ensure the longevity and optimal performance of your POOLHACKER Pool Fountain.
- Regular Inspection: Periodically inspect the fountain for any debris, leaves, or mineral buildup that might be blocking the nozzles or affecting water flow.
- Cleaning: If necessary, turn off the pump, remove the fountain, and clean it with mild soap and water. Rinse thoroughly to remove any soap residue.
- Winterization/Storage: During the off-season or when temperatures are expected to drop below freezing, remove the fountain from the pool. Drain all water from the unit and store it in a dry, protected area to prevent freezing and potential damage.
Troubleshooting
Refer to the table below for common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Low or No Spray | Insufficient pump power | Ensure your pool pump is at least 0.2 HP. A 0.75 HP sand pump is recommended for optimal performance (spray height up to 14ft). |
| Low or No Spray | Clogged nozzles | Turn off the pump, remove the fountain, and clear any debris from the nozzles. |
| Low or No Spray | Side valve not fully open (for high pressure) | Adjust the side valve to the 'Full Close' position for maximum pressure. |
| Leaks at Connection | Loose connection or missing O-ring | Ensure the fountain is securely screwed onto the adapter and the adapter is tightly connected to the return jet. Check for and replace any damaged O-rings. |
| Fountain Submerged | Water level too high or insufficient extension | Adjust pool water level or install the optional 3-inch extension tube (if not already used). |
For further assistance, please refer to the official user manual PDF or contact POOLHACKER customer support.
Specifications
- Brand: POOLHACKER
- Model: YC028-HB
- Material: Polyvinyl Chloride
- Product Dimensions: 14.76"L x 3.11"W x 7.68"H
- Item Weight: 1.69 Pounds
- Power Source: Pool Pump
- GTIN (UPC): 00793109990852
- Compatibility: Most 1 ½” Inground Pool return jets, 1 ½” / 1 ¼” Above Ground Pool inlet/outlet fittings.
- Recommended Pump Power: At least 0.2 HP (0.75 HP for optimal spray height up to 14ft)
Warranty and Support
For detailed warranty information, product registration, and customer support, please visit the official POOLHACKER store or refer to the comprehensive User Manual (PDF) available for download.
