Introduction
This manual provides detailed instructions for assembling, operating, and maintaining your Mega Construx Pokémon Series 17 Sobble Figure Building Set. Please read all instructions carefully before beginning assembly to ensure proper construction and safe use.
The set includes one buildable and poseable Sobble figure and a Nest Poké Ball with prongs for display. This product is designed for ages 6 and up.
Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years. Adult supervision is recommended during assembly and play, especially for younger children.
- Keep all small parts away from infants and young children to prevent accidental ingestion.
- Do not modify the product in any way, as this may compromise its structural integrity and safety.
- Dispose of packaging materials properly.
Package Contents
Verify that all components are present before starting assembly. The set contains 29 pieces.
- Sobble figure building pieces
- Nest Poké Ball building pieces
- Instruction sheet (this manual)
Image showing the product packaging and the assembled Sobble figure alongside the Nest Poké Ball. The packaging displays the Mega Construx and Pokémon logos, the Sobble character, and safety warnings. The assembled Sobble figure is light blue with yellow accents, and the Nest Poké Ball is green, tan, and white.
Setup and Assembly
Follow these steps to assemble your Sobble figure and Nest Poké Ball:
- Unpack Components: Carefully open the packaging and remove all building pieces. It is recommended to lay them out on a clean, flat surface.
- Identify Pieces: Refer to the included instruction sheet (if separate from this manual) to identify the different building blocks for Sobble and the Poké Ball.
- Assemble Sobble: Begin by connecting the core body pieces of Sobble, then attach the limbs, head, and tail according to the visual guide. Ensure all connections are firm.
- Assemble Nest Poké Ball: Construct the Poké Ball by joining the base, middle, and top sections. The top section is designed to resemble a nest, allowing the Sobble figure to sit securely.
- Final Check: Once both the figure and Poké Ball are assembled, gently test the articulation of Sobble's joints and ensure the Poké Ball is stable.
Operating and Play
The Mega Construx Sobble figure is designed for display and imaginative play.
- Poseability: The Sobble figure features multiple points of articulation, allowing for various poses. Gently adjust the limbs and head to achieve desired positions.
- Display: The Nest Poké Ball is designed to hold the Sobble figure. Place Sobble inside the Poké Ball for display purposes.
- Interactivity: This set can be combined with other Mega Construx Pokémon sets (sold separately) to expand play scenarios and build a larger collection.
Maintenance and Care
To ensure the longevity of your building set, follow these care instructions:
- Cleaning: Wipe the assembled figure and Poké Ball with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but avoid excessive moisture. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the set in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
- Handling: Handle the assembled figure and Poké Ball with care to avoid accidental breakage of small parts or connections.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Figure parts do not connect securely. | Incorrect piece orientation or misalignment. | Ensure pieces are oriented correctly and apply gentle, even pressure until they click into place. Refer to the assembly instructions. |
| Missing pieces. | Pieces may be overlooked in packaging or accidentally discarded. | Carefully check all packaging materials. If pieces are genuinely missing, contact customer support (see Warranty & Support section). |
| Figure joints are too loose or too stiff. | Normal variation in manufacturing or improper assembly. | Loose joints may be gently pressed together to tighten. Stiff joints may loosen with gentle manipulation. Avoid forcing movements. |
Specifications
- Product Name: Mega Construx Pokémon Series 17 Sobble Figure Building Set
- Model Number: HKT09
- Brand: Mega Brands (Manufactured by Mattel)
- ASIN: B0BXFWGVD6
- Number of Pieces: 29
- Recommended Age: 6+ years
- Product Dimensions: Approximately 6.35 x 7.62 x 15.24 inches (packaging/assembled product)
- Item Weight: Approximately 1.06 ounces
Warranty and Support
Mega Brands (Mattel) products are manufactured to high-quality standards. For information regarding warranty coverage or to report missing/defective parts, please contact Mattel Customer Service.
Online Support: Visit the official Mattel or Mega Construx website for FAQs and support contact information. (Specific URL not provided in input, so general guidance is given).
Phone Support: Refer to the product packaging or official brand website for regional customer service phone numbers.
Please have your product model number (HKT09) and ASIN (B0BXFWGVD6) ready when contacting support.