Redsack PB-001
Redsack Portable Bidet User Manual
Model: PB-001
For Travel & Camping, Feminine Hygiene, and Personal Cleaning
1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your Redsack Portable Bidet. Designed for personal hygiene, this manual squeeze handheld peri bottle offers a convenient and hygienic cleaning solution for various situations, including travel, camping, and daily use.
Key Features:
- Personal Hygiene Clean: Innovative flow rinsing technology for thorough front and back cleaning.
- Manual Water Flow Adjustment: Flexible water pressure control by gentle or strong squeezing.
- Environmentally Friendly & Health Material: Made of high-quality, BPA-free plastic for safe use.
- Easy to Carry and Store: Unique telescopic structure shrinks to a compact size, ideal for portability.
- Leak-Proof Design: Features 3 leak-proof seals and a secure sealing cap.
- Extendable Sprayer with Rotating Nozzle: Provides optimal reach and angle for effective cleaning.

Image: The Redsack Portable Bidet, illustrating its sleek, compact design and its extended nozzle for use.
2. Setup and Preparation
Before first use, please familiarize yourself with the components and follow these steps to prepare your bidet.
Components:
- Bidet Bottle (main body)
- Telescoping Nozzle Assembly
- Sealing Cap
Initial Setup Steps:
- Open the Cover: Gently rotate the top cover in one direction to unlock and remove it.
- Extend the Nozzle: Pull the telescoping tube upwards until it is fully extended and locked into place.
- Unscrew Cap: Unscrew the cap counter-clockwise to access the water reservoir.
- Fill with Water: Fill the bidet bottle with clean water. The capacity is approximately 380ml (12.85oz).
- Tighten Cap: Screw the cap clockwise firmly to ensure a leak-proof seal.
- Open Sealed Switch: Before use, rotate the nozzle to open the sealed switch, indicated by an arrow.

Image: Visual guide for preparing the bidet, showing the process of extending the nozzle, filling the bottle, and securing the cap.

Image: The bidet's compact size and 380ml capacity, demonstrating its portability and leak-proof twist lock mechanism.
3. Operating Instructions
The Redsack Portable Bidet is designed for ease of use and effective cleaning.
- Positioning: Hold the bidet upside down, aligning the nozzle with the area to be cleaned. The ergonomic 65° long neck nozzle design helps reach desired areas without discomfort.
- Adjust Water Flow: Gently squeeze the bottle to initiate a gentle water flow. For a stronger stream, apply more pressure. The manual squeeze allows for personalized water pressure adjustment.
- Cleaning: Use the directed water stream to clean the desired area. The precision porous nozzle ensures effective spray.
- Post-Use: After cleaning, release pressure on the bottle. Rotate the nozzle to close the sealed switch.
- Storage: Press the telescoping tube back into the bottle until it is fully retracted. Close the sealing cap securely to prevent any water leakage during storage or transport.

Image: Demonstration of the bidet's strong cleaning power, highlighting the precision porous nozzle and ease of squeezing.

Image: Illustration of the ergonomic 65° long neck nozzle, designed for comfortable and effective reach during use.
4. Care and Maintenance
Proper care ensures the longevity and hygiene of your Redsack Portable Bidet.
- Cleaning: After each use, empty any remaining water. Rinse the bottle and nozzle thoroughly with clean, cool water. The flat surface of the bidet is easy to clean.
- Temperature Warning: DO NOT rinse with hot water higher than 60°C (140°F). The product cannot be boiled or washed with boiling water.
- Drying: Allow all components to air dry completely before reassembling and storing to prevent mold or mildew growth.
- Storage: Store the bidet in its retracted, compact form with the sealing cap securely closed in a clean, dry place.

Image: Important warning: Do not rinse with hot water above 60°C. The product cannot be boiled or washed with boiling water.
5. Troubleshooting
If you encounter any issues with your Redsack Portable Bidet, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Weak Water Flow | Insufficient squeeze pressure; nozzle blockage; low water level. | Squeeze the bottle more firmly. Check the nozzle for any debris and clear if necessary. Refill the bottle with water. |
| Water Leakage | Cap not tightened properly; sealed switch not closed; damaged seal. | Ensure the cap is screwed on tightly. Confirm the sealed switch is closed after use. Inspect seals for damage; if damaged, contact support for replacement. |
| Nozzle Does Not Extend/Retract Smoothly | Debris in mechanism; misalignment. | Ensure no foreign objects are obstructing the mechanism. Gently align and try extending/retracting again. Do not force. |
6. Product Specifications
| Feature | Detail |
|---|---|
| Model Number | PB-001 |
| Capacity | 380 Milliliters (12.85 oz) |
| Material | Plastic (BPA-free) |
| Color | White |
| Item Weight | 5 ounces |
| Product Dimensions (Retracted) | 2.24 x 2.23 x 7.74 inches |
| Mounting Type | Handheld |
| Special Features | BPA Free, Lead Free, Leak Resistant, Pull Out Sprayer, Touchless |
7. Warranty Information
Redsack stands behind the quality of its products. This Portable Bidet comes with a lifetime warranty service. If there is a problem with the product during normal use, Redsack will provide you with a free replacement service.
Please retain your proof of purchase for warranty claims.
8. Customer Support
For any questions, concerns, or assistance with your Redsack Portable Bidet, our caring support team is available 24 hours a day.
You can visit the official Redsack store on Amazon for more information and contact options: Redsack Amazon Store.
Please have your product model number (PB-001) ready when contacting support.
9. Additional Information
The Redsack Portable Bidet is designed to be a hygienic and environmentally friendly alternative to traditional toilet paper. It is suitable for a wide range of users, including pregnant women, new mothers, individuals with arthritis, and the elderly, due to its soft, easy-to-squeeze material.

Image: The bidet is made from soft, easy-to-squeeze material, making it suitable for pregnant women, new mothers, arthritis patients, and the elderly.

Image: Comparison highlighting the benefits of using a bidet, such as saving paper towels, lower cost of use, and increased comfort, compared to traditional toilet paper.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.
