Philips Avent Single Electric Breast Pump

1. Introduction

This instruction manual provides comprehensive guidance for the safe and effective use of your Philips Avent Single Electric Breast Pump, model SCF396/31. Designed for comfort and efficiency, this breast pump features Natural Motion technology, hospital-strength performance, and a quiet, rechargeable motor for discreet pumping anywhere. Please read this manual thoroughly before first use and retain it for future reference.

Image: The Philips Avent Single Electric Breast Pump, showing the assembled pump kit, bottle, and compact motor unit.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the product:

• Keep the motor unit and adapter dry. Do not immerse them in water or other liquids.
• This product is not a toy. Keep all components out of reach of children.
• Use only the power adapter supplied with the product.
• Do not use the breast pump while bathing or showering.
• Inspect all components before each use. Discard and replace any damaged parts.
• Ensure all parts are correctly assembled before use to maintain proper suction.

3. Components Overview

Your Philips Avent Single Electric Breast Pump package includes the following components:

• Pump Kit: Includes 1 pump body, 1 diaphragm, 1 valve, and 1 soft silicone cushion.
• Motor Unit: The main control unit with rechargeable battery.
• Natural Response Bottle: 1 bottle (125ml/4oz) with 1 Natural Response nipple (size 0m+).
• Sealing Disc: For storing expressed milk.
• Power Adapter: For charging the motor unit.
• Travel Bag: For convenient transport.
• Disposable Breast Pads: 4 pieces.

Image: An assembled Philips Avent breast pump kit, showing the silicone cushion, pump body, and bottle.

4. Setup

4.1 Cleaning Before First Use

Before using the breast pump for the first time, disassemble all parts that come into contact with breast milk and clean them according to the 'Maintenance and Cleaning' section.

4.2 Assembling the Pump Kit

1. Insert the valve into the pump body from below.
2. Place the silicone diaphragm onto the pump body, ensuring it is securely sealed around the edges.
3. Attach the soft silicone cushion to the pump body, pressing firmly to ensure a tight seal.
4. Screw the bottle onto the pump body.
5. Connect the tubing to the pump body and the motor unit.

4.3 Charging the Motor Unit

Connect the power adapter to the motor unit and a power outlet. The battery indicator on the motor unit will show charging status. A full charge provides power for up to three pumping sessions. The motor unit uses a micro-USB adapter for charging.

Image: A woman assembling the Philips Avent breast pump, demonstrating the ease of putting parts together.

5. Operating Instructions

5.1 Positioning for Comfort

Sit in a comfortable, upright position. The design of the Philips Avent breast pump allows you to express milk without needing to lean forward, promoting a relaxed posture.

5.2 Powering On and Selecting Modes

1. Press the power button to turn on the motor unit.
2. The pump will start in stimulation mode, which gently stimulates milk flow. There are 8 stimulation levels.
3. Once milk starts flowing, press the mode selection button to switch to expression mode. There are 16 expression levels.
4. Adjust the suction level using the '+' and '-' buttons to find your most comfortable and efficient setting.
5. The digital timer display shows the duration of your pumping session.
6. The pump automatically remembers your last settings for convenience.

5.3 Using the Natural Response Nipple

The included Natural Response nipple supports your baby's individual drinking rhythm, making it easier to combine breastfeeding and bottle feeding. Ensure the nipple is correctly assembled with the bottle and cap before feeding.

5.4 Portability

The compact design and rechargeable battery allow for pumping on the go. Use the provided travel bag to carry your pump discreetly and conveniently.

Image: A woman using the Philips Avent breast pump while seated in a car, highlighting its portable design.

6. Maintenance and Cleaning

Proper cleaning and maintenance are essential for hygiene and optimal performance.

6.1 Disassembly for Cleaning

Before cleaning, ensure the breast pump is turned off and unplugged. Disassemble all parts that come into contact with breast milk: the bottle, pump body, silicone cushion, diaphragm, and valve.

6.2 Cleaning Instructions

• Motor Unit: Wipe the motor unit with a soft, damp cloth. Do not immerse in water or sterilize.
• Pump Kit Parts and Bottle: These parts are dishwasher safe. Alternatively, wash them by hand in warm soapy water, then rinse thoroughly.
• Sterilization: All parts that come into contact with breast milk (except the motor unit and tubing) can be sterilized by boiling for 5 minutes, using a steam sterilizer, or a microwave sterilizer.
• Closed System: The Philips Avent breast pump features a closed system, meaning milk does not flow into the tubing. This simplifies cleaning and ensures hygiene.

Image: A woman holding disassembled breast pump components, illustrating the ease of preparing parts for cleaning.

7. Troubleshooting

If you encounter issues with your breast pump, refer to the following common solutions:

• No Suction or Weak Suction:
  • Ensure all pump kit parts are correctly assembled and securely sealed.
  • Check that the silicone diaphragm and valve are not damaged or torn.
  • Verify that the tubing is properly connected to both the pump body and the motor unit.
• Pump Not Turning On:
  • Ensure the motor unit is fully charged or connected to the power adapter.
  • Check the power adapter and cable for any visible damage.
• Discomfort During Pumping:
  • Adjust the suction level to a comfortable setting.
  • Ensure the silicone cushion is correctly positioned on your breast. The flexible silicone cushion adapts to 99.98% of nipple sizes.
  • Try different pumping positions.

If problems persist, please contact Philips customer support.

8. Specifications

9. Warranty and Support

For warranty information, please refer to the warranty card included with your product. This document outlines the terms and conditions of your product's warranty.

For technical support, spare parts, or further assistance, please contact Philips customer service. You can find contact details on the Philips website or in the documentation provided with your product.

Manufacturer: Philips Consumer Lifestyle B.V.
Address: High Tech Campus 52, 5656 AG Eindhoven, Netherlands