1. Introduction
Thank you for choosing the SMEG 50's Retro Style Personal Blender. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read these instructions carefully before first use and keep them for future reference.
2. Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:
- Read all instructions.
- Do not immerse the blender base, cord, or plug in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use, before assembling or disassembling parts, and before cleaning.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Keep hands and utensils out of the container while blending to prevent the possibility of severe injury to persons or damage to the blender. A scraper may be used but only when the blender is not running.
- Blades are sharp. Handle with care.
- Always operate the blender with the bottle securely attached to the base.
- Do not blend hot liquids.
3. Package Contents
Your SMEG Personal Blender package includes:
- 1 x Blender Base with Backlit Knob
- 2 x 600 ml (20 oz) BPA-Free Tritan Bottles
- 2 x Blade Assemblies (pre-attached to bottles)
- 2 x Travel Lids
Image 3.1: Blender base, bottle with blade, and travel bottle with lid.
4. Product Overview
Familiarize yourself with the components of your SMEG Personal Blender.
Image 4.1: Front view of the blender.
Image 4.2: Side view of the blender, highlighting the control knob.
Image 4.3: Close-up of the travel lid.
5. Setup
- Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
- Clean: Before first use, wash the bottles, blade assemblies, and travel lids in warm, soapy water. Rinse thoroughly and dry. The blender base can be wiped with a damp cloth. Do not immerse the blender base in water.
- Placement: Place the blender base on a clean, dry, and stable surface. Ensure the power cord is not obstructing walkways or hanging over edges.
6. Operating Instructions
Follow these steps to blend your ingredients:
- Prepare Ingredients: Cut fruits and vegetables into small pieces (approximately 1 inch or 2.5 cm). Add liquids first, then soft ingredients, followed by harder ingredients and ice. Do not exceed the MAX fill line on the bottle.
- Assemble Bottle: Screw the blade assembly firmly onto the open end of the 600 ml Tritan bottle. Ensure it is tightly sealed to prevent leaks.
- Attach to Base: Invert the assembled bottle and blade, then place it onto the blender base. Align the tabs on the bottle with the slots on the base and twist clockwise until it locks into place.
- Plug In: Plug the blender into a 120V electrical outlet. The backlit knob will illuminate.
- Select Speed: Turn the control knob to select your desired blending speed:
- Speed 1: For softer ingredients and general blending.
- Speed 2: For harder ingredients, ice, and more powerful blending.
- Blend: Allow the blender to operate until desired consistency is achieved. For best results and to prevent overheating, blend in short bursts (e.g., 30 seconds on, 30 seconds off). Do not operate continuously for more than 60 seconds.
- Finish Blending: Turn the control knob back to the '0' (off) position. Unplug the blender from the outlet.
- Remove Bottle: Twist the bottle counter-clockwise to unlock it from the base, then lift it off.
- Enjoy: Unscrew the blade assembly from the bottle. You can either drink directly from the bottle or attach the travel lid for on-the-go convenience.
Image 6.1: Blender in operation with prepared smoothies.
Note: No official product videos were found that meet the specified embedding criteria (creator_type: Seller, m3u8 format). Therefore, no videos are embedded in this manual.
7. Cleaning and Maintenance
Regular cleaning ensures optimal performance and extends the life of your blender.
- Blender Base: Always unplug the blender before cleaning. Wipe the base with a soft, damp cloth. Do not use abrasive cleaners or immerse the base in water.
- Bottles, Blade Assemblies, and Lids: These parts are dishwasher safe (top rack only) or can be washed by hand in warm, soapy water. Use a brush to clean around the blades carefully. Rinse thoroughly and dry completely before storing.
- Storage: Store the blender and its accessories in a clean, dry place.
8. Troubleshooting
If you encounter issues with your blender, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blender does not turn on. | Not plugged in; bottle not correctly assembled or locked; power outage. | Ensure blender is plugged into a working outlet. Check that the bottle is securely locked onto the base. |
| Ingredients are not blending smoothly. | Too little liquid; too many ingredients; ingredients too large. | Add more liquid. Reduce the amount of ingredients. Cut ingredients into smaller pieces. Use Speed 2 for tougher items. |
| Blender leaks during operation. | Blade assembly not tightened; bottle not properly sealed to base. | Ensure the blade assembly is tightly screwed onto the bottle. Verify the bottle is securely locked onto the blender base. |
| Motor stops during blending. | Overheating due to continuous use or overloading. | Unplug the blender and let it cool down for at least 15 minutes. Reduce ingredient load and blend in shorter bursts. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | PBF01BLUS |
| Brand | Smeg |
| Color | Black |
| Capacity | 600 Milliliters (per bottle) |
| Product Dimensions | 10"D x 4"W x 7"H |
| Item Weight | 4 pounds |
| Power Source | Electric |
| Number of Speeds | 2 |
| Voltage | 120V |
| Controls Type | Knob (Backlit) |
| Material Type Free | BPA Free (Tritan bottles) |
| Blade Material | Stainless Steel |
| Included Components | Blender base, 2 x 600ml bottles, 2 x blade assemblies, 2 x travel lids |
| UPC | 812895023152 |
10. Warranty Information
This SMEG Personal Blender (Model PBF01BLUS) comes with a 1 Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal household use. It does not cover damage resulting from misuse, accident, alteration, neglect, or commercial use. Please retain your proof of purchase for warranty claims.
11. Customer Support
For technical assistance, warranty claims, or general inquiries, please contact SMEG customer support. US-based SMEG experts are available to assist you throughout the lifespan of your machine.
Refer to the official SMEG website or your purchase documentation for the most current contact information.
