Zomee Fit Wearable Breast Pump Instruction Manual

1. Introduction

The Zomee Fit Wearable Breast Pump is designed for mothers seeking a hands-free, portable, and efficient pumping experience. This manual provides detailed instructions for the safe and effective use of your Zomee Fit pump, ensuring optimal performance and milk expression.

2. What's in the Box

Your Zomee Fit Wearable Breast Pump package includes the following components:

• 2x Zomee Fit Wearable Electric Breast Pump Motors
• 2x 6oz 25mm Zomee Fit Breast Shield Kits
• 2x 21mm & 17mm Breast Shield Inserts
• 1x Collection Container Brush
• 1x USB-C Charger
• 2x Bra Strap Adjusters

3. Product Overview

Familiarize yourself with the main components of the Zomee Fit Wearable Breast Pump:

The pump consists of a motor unit, a breast shield body, a diaphragm, a duckbill valve, and a collection container. Various breast shield sizes (17mm, 21mm, 25mm) are provided for a comfortable and effective fit.

Control Panel

The LED display on the motor unit shows battery level, current mode, and suction level. Buttons allow for powering on/off, adjusting suction intensity, and switching between different pumping modes.

4. Setup and Assembly

Before first use, ensure all parts are clean and sterilized. The pump comes without a seal ring for simplified assembly and cleaning.

1. Assemble the Breast Shield Kit: Attach the duckbill valve to the breast shield body. Place the diaphragm on top of the breast shield body.
2. Attach Collection Container: Screw the collection container onto the bottom of the breast shield body.
3. Connect Motor Unit: Align the motor unit with the assembled breast shield kit and securely attach it.
4. Select Flange Size: Choose the appropriate breast shield size (17mm, 21mm, or 25mm) for comfort and efficiency.

Video: How to Use the Zomee Fit Wearable Electric Breast Pump

5. Operating Instructions

Powering On/Off

• To Power On: Press and hold the On/Off button until the display lights up. The pump will start in a pause state.
• To Start Pumping: After selecting your desired mode and level, press the Play button.
• To Power Off: Press and hold the On/Off button. The pump will also automatically shut off after 30 minutes of continuous use for safety.

Pumping Modes

The Zomee Fit offers multiple modes to mimic a baby's natural feeding pattern and optimize milk expression. Use the Mode Switch button to cycle through them:

• Stimulation Mode: Features weaker, quicker, and consistent suction to initiate milk flow.
• Expression Mode: Provides slower, deeper, and consistent sucks for efficient milk extraction.
• Two-Phase Mode: A combination mode that alternates between weaker/quicker sucks (stimulation) and deeper/stronger pulls (expression) to maximize let-down and milk output.
• Nipple Correction Mode: A unique mode designed for mothers with inverted or flat nipples. It draws the nipple out for 10 seconds, holds it, and then releases, gradually increasing suction over three levels to help evert the nipple.

Adjusting Suction Levels

Each mode has 9 adjustable suction levels. Use the "+" and "-" buttons to increase or decrease the intensity. The pump can reach up to 100 cycles per minute. Always increase the suction level slowly to one you are most comfortable with to avoid nipple trauma.

Recommended Pumping Settings

For optimal results, follow these recommended settings:

1. Start on Stimulation Mode: Begin your session in Stimulation Mode for the first 2 minutes to encourage let-down.
2. Switch to Expression Mode: After 2 minutes, switch to Expression Mode and continue for 8-10 minutes, or until milk flow slows. Slowly increase the suction level to your comfort.
3. Switch to Two-Phase Mode: If you need a second let-down, switch to Two-Phase Mode for the next 8-10 minutes.
4. End Session: End the pumping session once milk flow stops or you feel empty.

For Nipple Correction: If using Nipple Correction Mode, start with this mode for 3-5 minutes to evert the nipple, then proceed with Stimulation, Expression, and Two-Phase modes as recommended above.

6. Special Features

Advanced Fullness Sensor

The Zomee Fit includes an Advanced Fullness Sensor that detects when the collection container is full, preventing overfilling and spillage. It offers three levels of automatic shutoff: 4oz, 5oz, and 6oz.

• To Customize Sensor Level: Press the On/Off button and the "+" button simultaneously. The display will show L1 (4oz), L2 (5oz), or L3 (6oz). Cycle through by pressing "+" until your desired level is selected.
• To Turn Sensor On/Off: Press and hold the Mode button. The display will show "ON" or "OFF".
• Recommendation: Limit activity while using the sensor feature. White bras or undergarments can sometimes affect the sensor's accuracy due to reflection.

New Timer Functionality

The integrated timer helps you monitor the duration of each pumping session, ensuring you pump for the optimal amount of time to maximize milk expression.

7. Cleaning and Maintenance

Proper cleaning and maintenance are essential for hygiene and longevity of your pump. All parts are BPA + Phthalate-free.

• Disassembly: Disassemble all parts after each use.
• Cleaning: Wash all parts that come into contact with milk with warm, soapy water using the provided collection container brush. Rinse thoroughly.
• Drying: Air dry all parts completely before reassembly or storage.
• Motor Unit: Wipe the motor unit with a clean, damp cloth. Do not immerse the motor unit in water.
• Dishwasher Safety: The pump parts are NOT dishwasher safe.

8. Specifications

9. Warranty and Support

All Zomee breast pump parts and accessories are made with high quality. The Zomee Fit model comes with a 2-year warranty.

For any questions, troubleshooting, or warranty claims, please contact Zomee customer support. Refer to the contact information provided in your product packaging or visit the official Zomee website.