VINGLI Unfinished 6 Drawer Dresser Instruction Manual (Model D0RWBSN)

Introduction

Thank you for choosing the VINGLI Unfinished 6 Drawer Dresser. This natural solid wood dresser is designed for durability and offers a unique opportunity for customization through painting or staining. This manual provides essential information for safe assembly, operation, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly.

Safety Information

Anti-Tipping Device: An anti-tip device is included to prevent accidental tipping. It is crucial to mount the dresser to the wall using this device for safety, especially in households with children.
Prohibit Climbing: Do not allow children to climb on the dresser. Climbing can cause the dresser to tip over, leading to serious injury.
Weight Limits: The maximum load capacity for the top panel is 110 lbs. Each large drawer can hold up to 22 lbs, and each small drawer can hold up to 11 lbs. Do not exceed these weight limits.
Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Image showing the anti-tipping device installation on the VINGLI dresser. — **Figure 1: Anti-Tipping Device.** This image illustrates the anti-tipping device being installed on the back of the dresser, securing it to the wall. A child is shown near the dresser, emphasizing the importance of this safety feature.

Product Overview

The VINGLI 6 Drawer Dresser features a natural rubber wood construction, offering a rustic aesthetic that can be customized. It includes two smaller utility drawers and four spacious drawers, all equipped with full extension silent slide rails for smooth operation.

Diagram showing dimensions and weight capacities of the VINGLI 6 Drawer Dresser. — **Figure 2: Product Dimensions and Capacities.** This diagram provides detailed measurements of the dresser (17.7"D x 31.5"W x 49.2"H) and indicates the maximum weight capacity for the top (110 lbs) and individual drawers (11 lbs for small, 22 lbs for large).

Image of the VINGLI dresser showcasing its natural rubber wood and natural smell, contrasting with engineered wood. — **Figure 3: Natural Rubber Wood Construction.** This image highlights the natural rubber wood material of the dresser, emphasizing its natural appearance and smell, and contrasting it with engineered wood.

Setup & Assembly

Assembly is required for this dresser. All necessary hardware is included. You will need a screwdriver and a drill for assembly. It is recommended to paint or stain the wooden components before assembly for a smoother finish, as per product care instructions.

Assembly Video Guide

Video 1: ENOUSHU Dresser for Bedroom with 6 Drawers Assembly. This video provides a detailed, step-by-step guide on how to assemble the 6-drawer dresser, including attaching hardware, constructing the frame, and installing the drawers.

General Assembly Steps (Refer to video for detailed visuals)

Prepare Components: Unpack all parts and hardware. Identify each component using the provided labels.
Assemble Drawer Sides: Attach the small knobs (H) to the drawer front panels (25). Secure the drawer side panels (19, 21, 24) and back panel (23) using screws (B, G) and wooden dowels (C).
Attach Drawer Slides: Secure the drawer slides (MDL, MDR) to the assembled drawer boxes using screws (F).
Assemble Base Frame: Connect the base frame components (14, 15, 16, 17, 18) using screws (B, A) and wooden dowels (D). Attach the protective feet (K) to the bottom.
Assemble Main Frame Sides: Attach the drawer supports (N, MCL, MCR) to the main frame side panels (2, 3, 13) using screws (B, E).
Assemble Top Frame: Connect the top frame components (4, 5, 9, 12) using screws (B, A) and wooden dowels (D).
Connect Frame Sections: Attach the top frame to the main frame using screws (A) and wooden dowels (D).
Install Back Panel: Secure the back panel (32) to the main frame using screws (L).
Insert Drawers: Carefully slide the assembled drawers into their respective slots in the main frame. Attach the drawer handles (I) to the larger drawers (31).

Image of a child and adult painting the unfinished VINGLI dresser outdoors. — **Figure 4: DIY Customization.** This image shows the unfinished dresser being painted, highlighting the DIY aspect of the product.

Operating Instructions

The VINGLI dresser features full extension silent slide rails, allowing drawers to open smoothly and fully for easy access to contents. To open a drawer, gently pull the knob or handle. To close, push the drawer firmly until it is fully seated.

Image detailing the user-friendly design of the VINGLI dresser, including spacious top and drawer capacities. — **Figure 5: User-Friendly Design.** This image highlights the spacious top for items like lamps and books, and illustrates the storage capacity of the utility drawers (for sewing kits, fabric shavers) and larger drawers (20-25 folded shirts, 10-16 folded jeans).

Close-up images of the VINGLI dresser's crafted details: chamfered top, wooden handles, solid rubber wood, mending wedges, and full extension slides. — **Figure 6: Crafted Details.** This image provides close-up views of the dresser's features, including the top panel chamfer design, wooden round handles, solid rubber wood finish, mending wedges for stability, and full extension drawer slides.

Maintenance

Cleaning: Wipe the dresser with a dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners that could damage the wood finish.
Finishing: If you choose to paint or stain your dresser, ensure the surface is clean and lightly sanded before applying your chosen finish. Follow the instructions of your paint/stain product.

Troubleshooting

Drawers not sliding smoothly: Ensure that the drawer slides are correctly installed and aligned. Check for any obstructions in the tracks.
Wobbly dresser: Verify that all screws and fasteners are tightened securely. Ensure the dresser is placed on a level surface. Re-check assembly steps for any missed connections.
Parts do not align: Double-check the instruction manual and assembly video to ensure each piece is oriented correctly before fastening. Do not overtighten screws, as this can damage the wood.

Specifications

Feature	Detail
Brand	VINGLI
Model Name	Dresser
Product Dimensions	17.7"D x 31.5"W x 49.2"H
Number of Drawers	6
Material	99% Rubberwood, 1% Engineered Wood
Furniture Finish	Unfinished
Color	Nature
Item Weight	83.6 Pounds
Assembly Required	Yes
Product Care Instructions	Paint before Assembly, Wipe with Dry Cloth

Warranty & Support

VINGLI offers a Worry-Free Lifetime Quality Warranty for its nature wood DIY series furniture. We are committed to providing professional customer service before and after your purchase. Our team typically responds to inquiries within 24 hours.

For further assistance or to explore more VINGLI products, please visit the VINGLI Store on Amazon.

VINGLI D0RWBSN