1. Introduction
Thank you for choosing the Letmy Solar Lantern DL-002. This outdoor solar lantern is designed to provide ambient lighting with a realistic flickering flame effect, enhancing the atmosphere of your garden, patio, or pathway. Featuring an efficient solar panel and durable construction, it offers an eco-friendly and convenient lighting solution.
Image 1.1: Two Letmy Solar Lanterns showcasing the flame effect.
2. Safety Information
- Ensure the lantern is installed in a location where it receives direct sunlight for optimal charging.
- Do not attempt to open or modify the lantern's internal components, as this may damage the product and void the warranty.
- Keep the solar panel clean from dust, dirt, and debris to maintain charging efficiency.
- This product is designed for outdoor use and is IP65 waterproof. However, avoid submerging it in water.
- Dispose of batteries according to local regulations.
3. Setup and Installation
The Letmy Solar Lantern offers versatile installation options. Before first use, ensure the ON/OFF switch is in the 'ON' position and allow the lantern to charge in direct sunlight for at least 6-8 hours.
3.1 Initial Activation and Charging
- Locate the ON/OFF switch, typically found near the solar panel. Switch it to the 'ON' position.
- Place the lantern in a location that receives ample direct sunlight throughout the day.
- Allow the lantern to charge for 4-6 hours during the day. The upgraded monocrystalline solar panel has a 20% conversion efficiency.
Image 3.1: Illustration of the solar panel's charging process and efficiency.
3.2 Mounting Options
The lantern can be installed in several ways to suit your outdoor decor:
- Tabletop Placement: Simply place the lantern on any flat surface, such as a patio table or steps.
- Hanging: Utilize the integrated hook to hang the lantern from a shepherd's hook, tree branch, or pergola.
- Wall Mount: The lantern can be attached to a wall using appropriate mounting hardware (not included) and its design.
Image 3.2: Examples of lantern placement in a garden, on a wall, and on a table.
4. Operating Instructions
Once fully charged and the switch is in the 'ON' position, the Letmy Solar Lantern operates automatically:
- Automatic On/Off: The lantern will automatically turn on at dusk and turn off at dawn.
- Illumination Duration: After a full charge (4-6 hours of direct sunlight), the lantern can illuminate for approximately 10-12 hours.
- Flickering Flame Effect: The integrated LED strips create a dynamic and realistic flickering flame, providing a warm and inviting ambiance.
Image 4.1: Day and night operation of the solar lantern.
5. Maintenance
To ensure the longevity and optimal performance of your Letmy Solar Lantern, follow these simple maintenance guidelines:
- Clean Solar Panel: Regularly wipe the solar panel with a soft, damp cloth to remove any accumulated dust, dirt, or debris. A clean panel ensures maximum sunlight absorption and charging efficiency.
- Inspect for Damage: Periodically check the lantern for any physical damage, especially after severe weather conditions.
- Weather Resistance: The lantern is constructed from high-quality ABS material and features an IP65 waterproof and corrosion-resistant design, allowing it to withstand various weather conditions including heat, wind, rain, snow, and frost.
Image 5.1: Lanterns shown in various weather conditions, highlighting durability.
6. Troubleshooting
If your solar lantern is not functioning as expected, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lantern does not turn on at night. |
|
|
| Short illumination time. |
|
|
| Flickering effect is weak or inconsistent. |
|
|
7. Specifications
- Model Number: DL-002
- Dimensions: 26 cm (Length) x 13 cm (Width) x 16.5 cm (Height)
- Weight: Approximately 650 g
- Material: ABS, Plastic
- Power Source: Solar-powered
- Light Source Type: LED
- Water Resistance Level: IP65 (Waterproof)
- Battery: Built-in 800mAh rechargeable battery (equivalent to 1 AAA type battery for power reference)
- Charging Time: 4-6 hours (direct sunlight)
- Illumination Time: 10-12 hours (after full charge)
- Mounting Type: Tabletop, Hanging (hook), Wall Mount
- Color: Black
Image 7.1: Detailed view of the lantern's dimensions and features.
8. Warranty and Support
Letmy provides a 100% satisfaction guarantee. If you are not satisfied with the product's performance, quality, or color within 12 months from the date of purchase, please contact our customer service for support. We are committed to providing excellent after-sales service.
For further assistance or inquiries, please visit the Letmy Store on Amazon.
