Introduction
The Winzwon Car LED Lights are designed to enhance your vehicle's interior ambiance with customizable lighting. Featuring APP control, a wide range of colors, and music synchronization modes, these USB-powered light strips offer a dynamic and personalized driving experience. This manual provides essential information for setup, operation, and maintenance of your Winzwon Car LED Lights.
What's in the Box
- LED Light Strips (2 Pack)
- USB Cable
Setup and Installation
The Winzwon Car LED Lights are flexible and designed for easy installation within your vehicle's interior gaps. Follow these steps for optimal setup:
- Prepare the Surface: Before installation, ensure the surface where the LED strips will be placed is clean and dry. This helps the adhesive maintain its stickiness.
- Position the Strips: Carefully decide the desired placement for each LED strip. The extra-long cable allows for versatile positioning throughout the car interior.
- Apply the Strips: Gently peel the adhesive backing and press the LED strip firmly onto the clean surface. Avoid tearing the light strip multiple times, as this can reduce the adhesive's effectiveness.
- Connect Power: Connect the USB cable to a compatible USB port in your car. Ensure the USB port and adapter are clean and undamaged before use.
Image: Illustration of how to install the four LED light strips within a car's interior, highlighting the cable routing and placement under seats and dashboard.
Operating Instructions
Your Winzwon Car LED Lights are controlled via a dedicated mobile application, eliminating the need for a physical remote control.
APP Control
Download the official Winzwon app from your smartphone's app store. Once installed, open the app and ensure your phone's Bluetooth is enabled to connect to the LED lights.
Image: The mobile application interface for controlling the car LED lights, showing color selection and various modes.
Image: Demonstrates the APP control feature, with a smartphone controlling the car's interior lighting and music synchronization.
Color and DIY Modes
The app allows you to select from a variety of preset colors. Additionally, you can utilize the DIY mode to create and save your own unique color styles, offering extensive customization.
Image: Visual representation of the 16 million vibrant colors available for customization within the car interior.
Music Control Mode
The built-in high-sensitivity microphone enables the lights to flash and change colors in rhythm with your music. Activate the music mode through the app to create a dynamic and immersive audio-visual experience.
Image: Depiction of the music control mode, where the car's interior lights synchronize with the rhythm of the music.
Video: Demonstration of the Winzwon Car Accessories APP Controlled LED Lights, showcasing color changes and music synchronization.
Maintenance
To ensure the longevity and optimal performance of your Winzwon Car LED Lights, follow these maintenance guidelines:
- Cleaning: Gently wipe the LED strips with a soft, dry cloth to remove dust or debris. Avoid using harsh chemicals or abrasive cleaners, which can damage the lights or their adhesive.
- USB Port Care: Keep the USB port and adapter clean and free from obstructions. Periodically check for any signs of damage to the USB cable or adapter.
- Handling: While the strips are flexible, avoid excessive bending or sharp folds that could damage the internal wiring.
- Temperature: Avoid exposing the lights to extreme temperatures for prolonged periods, as this may affect their performance and lifespan.
Troubleshooting
If you encounter issues with your Winzwon Car LED Lights, refer to the following common troubleshooting steps:
- Lights Not Turning On:
- Ensure the USB cable is securely connected to a functioning USB port in your vehicle.
- Verify that the vehicle's power is on and the USB port is receiving power.
- Check the USB cable and adapter for any visible damage.
- App Connectivity Issues:
- Make sure your smartphone's Bluetooth is enabled.
- Restart the Winzwon app.
- If issues persist, try reinstalling the app.
- Ensure no other devices are interfering with the Bluetooth connection.
- Lights Not Responding to App/Music:
- Check the app settings to ensure the correct mode (e.g., Music Mode) is selected.
- Verify that the microphone is not obstructed if using music sync.
- Try disconnecting and reconnecting the USB power to reset the lights.
Specifications
| Feature | Detail |
|---|---|
| Brand | Winzwon |
| Model | SH-E8 |
| Color | RGB |
| Form Factor | Strip |
| Auto Part Position | Inner |
| Included Components | Led light strip |
| Connectivity Technology | USB |
| Special Feature | Waterproof |
| Material | Plastic |
| Water Resistance Level | Waterproof |
| Remote Control Included? | No |
| Number of Pieces | 2 |
| Automotive Fit Type | Universal Fit |
| Item Weight | 1.03 pounds |
| Package Dimensions | 10.83 x 7.87 x 3.19 inches |
Warranty and Support
Specific warranty details are not provided in this manual. For warranty information, technical support, or any product-related inquiries, please contact Winzwon customer service directly through their official website or the retailer where the product was purchased.
