1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your AOGLLATI Nightstand with Charging Station and LED Lights. Please read this manual thoroughly before assembly and use to ensure proper function and safety.
Image 1.1: Two AOGLLATI Nightstands, showcasing their design with illuminated open shelves and charging capabilities.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage to the product:
- Ensure all components are securely fastened during assembly.
- Do not exceed the maximum weight capacity for the tabletop (44 lbs) or open storage/drawers (22 lbs each).
- Keep liquids away from the charging station to prevent electrical hazards.
- Do not attempt to modify the electrical components or wiring.
- Place the nightstand on a stable, level surface to prevent tipping.
- Keep small parts away from children during assembly.
3. Package Contents
Verify that all parts are present before beginning assembly. The package should contain:
- Nightstand components (engineered wood panels, drawers, hardware)
- LED light strip with controller
- Integrated charging station (2 AC outlets, 2 USB ports, 4.9ft power cord)
- Assembly Guide
- Installation Tool (e.g., Allen wrench, screwdriver)
4. Setup & Assembly
Assembly typically takes approximately 30 minutes. Follow the step-by-step instructions provided in the included Assembly Guide. Ensure you have adequate space and a clean work area.
- Unpack all components and verify against the parts list in the Assembly Guide.
- Identify and separate all labeled pieces and hardware.
- Assemble the main frame of the nightstand according to the diagrams.
- Install the drawer slides and assemble the drawers.
- Integrate the LED light strip into the designated open shelf area.
- Secure the charging station into its pre-drilled slot on the tabletop.
- Attach the drawer handles.
- Place the nightstand in its desired location, ensuring it is stable.
Image 4.1: Product dimensions, useful for planning placement and understanding component sizes during assembly.
5. Operating Instructions
5.1. LED Lights
The integrated LED light strip offers multi-variable RGB colors and adjustable brightness. It can be controlled via a physical key controller or a dedicated mobile application.
- Key Control: Use the inline key controller to cycle through colors, adjust brightness, and turn the lights on/off.
- APP Control: Download the specified mobile application (refer to the Assembly Guide for app name/QR code). Connect the LED lights via Bluetooth to your device. The app allows for a wider range of color customization, brightness adjustments, and dynamic modes.
Image 5.1: LED light control options, including the physical key controller and the mobile application interface.
5.2. Charging Station
The nightstand features a built-in charging station with 2 AC power outlets and 2 USB ports, powered by a 4.9ft cord.
- Power Connection: Plug the nightstand's power cord into a standard 125V/12A wall outlet.
- On/Off Switch: Use the red switch on the charging station to activate or deactivate power to the outlets and USB ports.
- AC Outlets: Connect devices requiring standard AC power (125V/12A).
- USB Ports: Connect devices for charging via USB (5V/2A).
Image 5.2: Detailed view of the charging station, highlighting the power outlets, USB ports, and the on/off switch.
6. Maintenance
To maintain the appearance and longevity of your nightstand:
- Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Spills: Promptly wipe up any spills to prevent damage to the engineered wood.
- Electrical Components: Ensure the charging station is unplugged before cleaning around electrical components.
- Hardware: Periodically check and tighten any loose screws or fasteners.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED lights do not turn on. | Power cord not plugged in, charging station switch off, loose LED connection, app not connected. | Ensure the nightstand is plugged into a live outlet. Turn on the charging station switch. Check LED strip connections. Reconnect the app via Bluetooth. |
| Charging station not providing power. | Power cord not plugged in, charging station switch off, wall outlet not active. | Verify the nightstand's power cord is securely plugged into a functional wall outlet. Ensure the red on/off switch on the charging station is in the "on" position. Test the wall outlet with another device. |
| Drawers are stiff or do not slide smoothly. | Improper assembly of drawer slides, debris in tracks, uneven surface. | Review assembly instructions for drawer slide installation. Clear any obstructions from the tracks. Ensure the nightstand is on a level surface. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AOGLLATI |
| Model Number | B0BW34CYNF |
| Product Dimensions (D x W x H) | 13.8" x 15.7" x 23.6" |
| Material | Engineered Wood |
| Color | Black |
| Item Weight | 26.5 Pounds (per unit) |
| Max Tabletop Load Capacity | 44 lbs |
| Max Drawer/Shelf Load Capacity | 22 lbs (each) |
| Charging Station | 2 AC Outlets (125V/12A), 2 USB Ports (5V/2A) |
| Power Cord Length | 4.9 feet |
| LED Lights | Multi-variable RGB, Key & APP Control |
| Included Components | Assembly Guide, Installation Tool |
| Care Instructions | Wipe with Damp Cloth |
9. Customer Support
For any questions, concerns, or assistance with your AOGLLATI Nightstand, please contact our customer service team. We are available to help you.
Contact Information: Refer to your purchase documentation or the AOGLLATI official website for the most current contact details.