Belaco Dehumidifier User Manual

Introduction

Thank you for purchasing the Belaco Dehumidifier. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new dehumidifier. Please read this manual thoroughly before using the appliance and keep it for future reference.

The Belaco Dehumidifier is designed to effectively remove excess moisture from the air, helping to prevent mould, dampness, and musty odours in various indoor environments such as bedrooms, kitchens, caravans, offices, garages, basements, bathrooms, and wardrobes. It features a 1000ml water tank, quiet operation (20-40dB), 7 changeable night light colours, and a sleep mode function.

Safety Instructions

To ensure safe operation, always adhere to the following safety precautions:

• Do not block the air inlet or outlet.
• Ensure the dehumidifier is placed on a stable, level surface.
• Do not immerse the unit, power cord, or plug in water or other liquids.
• Unplug the unit before cleaning or performing any maintenance.
• Keep out of reach of children and pets.
• Do not operate the unit if the power cord or plug is damaged.
• Use only the power adapter supplied with the unit.
• Do not use in extremely hot or cold environments.

Product Overview

Familiarize yourself with the components and features of your Belaco Dehumidifier.

Image Description: A black Belaco dehumidifier with a clear water tank at the bottom, showing water collected inside. The top features a grille and control buttons.

Image Description: The Belaco dehumidifier shown with its dimensions: 25cm height, 15.2cm width, and 13.5cm depth.

Key Features:

• 1000ml Water Tank: Detachable tank for easy emptying.
• Effective Dehumidification: Reduces humidity to 45%RH, ideal for eliminating musty smells and drying damp areas.
• 7 Changeable Night Lights: Customizable ambient lighting.
• Sleep Mode: Ensures quiet operation for peaceful nights.
• Semiconductor Technology: Advanced cooling system for efficient operation.
• Portable & Stylish: Lightweight design with a black matte finish.
• Ultra-Quiet Operation: 20-40dB Peltier technology for minimal noise.

Setup

1. Unpacking: Carefully remove the dehumidifier from its packaging. Retain the packaging for future storage or transport.
2. Placement: Place the dehumidifier on a firm, level surface. Ensure there is at least 20 cm (8 inches) of space around the unit for proper air circulation. Avoid placing it near heat sources or in direct sunlight.
3. Power Connection: Insert the power adapter into the DC input port on the back of the dehumidifier. Plug the other end into a suitable electrical outlet (AC 100-240V, 50/60Hz).

Image Description: The Belaco dehumidifier placed on a wooden surface in a bedroom, demonstrating its compact size and suitability for small spaces.

Image Description: The Belaco dehumidifier positioned on a wooden table in a living room, highlighting its stylish design that blends with home decor.

Operating Instructions

Power On/Off:

• Press the Power Button (⏻) on the top of the unit to turn the dehumidifier on or off. The indicator light will illuminate when the unit is operating.

Light Mode:

• Press the Light Button (💡) to cycle through the 7 available LED light colours. Press again to turn the light off.

Sleep Mode:

• Press the Sleep Mode Button (🌛) to activate sleep mode, which reduces the fan speed and light intensity for quieter operation. Press again to exit sleep mode.

Image Description: The Belaco dehumidifier with graphical representations of its features: dehumidification, silent operation, 7 LED light options, and sleep mode.

Image Description: A graphic illustrating the low noise levels of the Belaco dehumidifier (20-40dB), comparing it to sounds like falling leaves and sleep.

Automatic Shut-off:

The dehumidifier will automatically shut off when the water tank is full. The indicator light will change to red, and the unit will stop operating. This prevents overflow.

Maintenance

Emptying the Water Tank:

When the water tank is full, the dehumidifier will stop operating. Follow these steps to empty the tank:

1. Turn off the dehumidifier and unplug it from the power outlet.
2. Carefully pull out the water tank from the back of the unit.
3. Remove the water tank cover.
4. Pour out the collected water.
5. Replace the water tank cover and slide the tank back into the dehumidifier until it clicks into place.
6. Plug the unit back in and turn it on to resume operation.

Image Description: A step-by-step visual guide showing how to remove, empty, and reinsert the water tank of the Belaco dehumidifier.

Cleaning the Unit:

• Wipe the exterior of the dehumidifier with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Clean the air inlet and outlet grilles regularly with a soft brush or vacuum cleaner to prevent dust buildup.
• The water tank should be cleaned periodically with mild detergent and water to prevent mould or mildew growth. Rinse thoroughly before reinserting.

Troubleshooting

If the problem persists after trying the above solutions, please contact Belaco customer support.

Specifications

• Model: Electric dehumidifier
• Water Tank Capacity: 1000 ml
• Dimensions (L x W x H): 13.5 x 15.2 x 25 cm
• Weight: 1.32 kg
• Noise Level: 20-40 dB
• Technology: Semiconductor (Peltier)
• Recommended Room Size: Small spaces (bedroom, wardrobe, caravan, living room, office, garage)
• Special Features: 7-colour LED mood lighting, Sleep mode, Automatic shut-off when tank is full.

Warranty and Support

Belaco products are designed and manufactured to the highest quality standards. For any issues or inquiries regarding your dehumidifier, please contact Belaco customer support through the retailer where you purchased the product or visit the official Belaco website for contact information.

Please retain your proof of purchase for warranty claims.

For more information and support, you may visit the Belaco Store on Amazon.