AWESAFE Android 13 Car Radio User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AWESAFE Android 13 Car Radio. Please read this manual thoroughly before using the product to ensure proper function and to prevent damage. Keep this manual for future reference.

Safety Information

• Professional Installation Recommended: Due to the complexity of car electrical systems, professional installation is highly recommended. Incorrect installation can lead to vehicle damage or malfunction.
• Power Disconnection: Always disconnect the vehicle's battery before beginning any installation or maintenance to prevent electrical shorts and damage.
• Wiring: Ensure all wiring connections are secure and properly insulated to avoid short circuits. Refer to the wiring diagram provided with your product.
• Driving Safety: Do not operate the device in a way that distracts you from driving. Always prioritize road safety.
• Temperature: Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
• Cleaning: Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

Package Contents

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact customer support.

Image: Components included in the AWESAFE Android 13 Car Radio package.

• AWESAFE Android 13 Car Radio Main Unit
• SIM Card Slot (for 4G connectivity)
• GPS Antenna
• Main Connection Cable
• 4G Antenna Module
• USB Cable
• Installation Screwdriver

Compatibility

This AWESAFE Android 13 Car Radio is specifically designed for the following BMW models and years:

• BMW 5 Series: E60, E61, E63, E64 (2004-2008)
• BMW 3 Series: E90, E91, E92 (2004-2008)

Important: Compatibility depends on your vehicle's original multimedia system. This unit is compatible with vehicles equipped with the CCC System (10-pin LVDS connector). It is NOT compatible with the CIC System (4-pin LVDS connector).

Image: Visual guide to distinguish between CCC (10-pin LVDS) and CIC (4-pin LVDS) systems for compatibility.

Please verify your vehicle's original system type by checking the LVDS plug at the back of your original display unit before installation.

Setup and Installation

Installation requires careful attention to detail. It is recommended to seek professional assistance if you are not familiar with car audio system installations.

Pre-Installation Checks:

• Ensure the vehicle's battery is disconnected.
• Confirm your vehicle has the compatible CCC system.
• Gather all necessary tools (screwdriver, trim removal tools, etc.).

Installation Steps:

1. Remove Original Display: Carefully remove the original car radio display and trim panels to access the wiring and mounting points.
2. Connect Wiring: Connect the main power harness, LVDS cable, GPS antenna, 4G antenna, and USB cables to the new AWESAFE unit and the vehicle's existing wiring. Ensure all connections are secure.
3. Mount New Unit: Securely mount the AWESAFE Android 13 Car Radio into the dashboard opening.
4. Test Functionality: Before reassembling the dashboard, reconnect the battery and perform initial tests to ensure the unit powers on, audio works, and basic functions are accessible.
5. Reassemble: Carefully reassemble all trim panels and components.

Initial System Configuration:

After installation, some settings may need adjustment. The following image illustrates common initial setup steps:

Image: Initial configuration steps for the AWESAFE Android 13 Car Radio.

1. Step 1: Vehicle Information Settings
   • Access "Car Info" on the main screen.
   • Navigate to "Factory Head Unit Parameter Setting".
   • Select "Original menu Resolution adjustment (automatic)" or "Adaptive Resolution".
2. Step 2: Rear Camera Type (if applicable)
   • From "Car Info", go to "General Setting".
   • Select "Rear Camera Type" and choose the appropriate format for your camera. This step can be ignored if no camera is installed.
3. Step 3: AUX Input Selection
   • On the main screen, select "Multimedia".
   • Choose "External devices".
   • Select "AUX" to enable audio input from the original car system.

Note: Some BMW models may require AUX activation via vehicle coding (e.g., with a diagnostic tool) if not already present.

Operating Instructions

Your AWESAFE Android 13 Car Radio offers a wide range of features for an enhanced driving experience.

Switching Between Original and Android Systems

The unit allows seamless switching between the original BMW iDrive system and the Android interface. This ensures that all original vehicle functions are retained.

Image: Seamless switching between the original car system and the Android system.

The unit also supports original car features such as speakers, CD player, and iDrive control.

Image: Retention of original car features.

CarPlay and Android Auto

Connect your smartphone wirelessly or via USB to access CarPlay or Android Auto. This allows for navigation, calls, messages, and music streaming directly from your phone's interface on the car radio screen.

Image: CarPlay interface in use.

Image: Android Auto interface in use.

To set up wireless CarPlay/Android Auto, ensure your phone's Bluetooth is on and paired with the car radio. Some configurations may require setting the Wi-Fi Hotspot band to 2.4GHz in the unit's network settings for stable wireless connection.

Bluetooth Connectivity

Pair your smartphone via Bluetooth for hands-free calling and audio streaming. Access your phonebook, dial numbers, and play music directly from your device.

Image: Bluetooth hands-free calling feature.

GPS Navigation

The integrated GPS module provides accurate navigation. You can use pre-installed maps or download your preferred navigation apps from the Google Play Store when connected to the internet.

Image: GPS navigation in action.

Wi-Fi and 4G Connectivity

Connect to Wi-Fi hotspots or insert a 4G SIM card (if supported by your model) for internet access. This enables online navigation, streaming services, app downloads, and real-time updates.

Image: Wi-Fi and 4G connectivity for online features.

Digital Sound Processor (DSP)

Utilize the built-in DSP to customize your audio experience. Adjust equalizer settings (Flat, Pop, Rock, Jazz, Classic, User) and sound field to optimize sound quality for your vehicle's acoustics.

Image: DSP settings for audio customization.

Maintenance

• Screen Cleaning: Use a soft, lint-free cloth to gently wipe the touchscreen. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals.
• Software Updates: Periodically check for software updates to ensure optimal performance and access to new features. Updates can usually be found in the system settings or on the manufacturer's website.
• Environmental Conditions: Protect the unit from extreme heat, cold, and direct moisture.
• Cable Connections: Occasionally check that all cables are securely connected, especially after driving on rough terrain.

Troubleshooting

If you encounter issues with your AWESAFE Android 13 Car Radio, refer to the following common solutions:

If these solutions do not resolve the issue, please contact AWESAFE customer support for further assistance.

Specifications

Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or visit the official AWESAFE website. If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your product, please contact AWESAFE customer support.

AWESAFE Customer Support: Refer to your purchase invoice or the AWESAFE official website for contact details.

Online Resources: Additional support, FAQs, and software updates may be available on the AWESAFE brand store or product page.