HUIZHEN D10 Plus

HUIZHEN Replacement Parts Kit for Dreametech D10 Plus Robot Vacuum Cleaner (RLS3D)

Model: D10 Plus (RLS3D)

Brand: HUIZHEN

Introduction

This instruction manual provides detailed guidance for the installation and maintenance of the HUIZHEN Replacement Parts Kit for the Dreametech D10 Plus Robot Vacuum Cleaner (Model RLS3D). Regular replacement of these components ensures optimal performance and extends the lifespan of your robot vacuum.

Important Compatibility Note: This kit is specifically designed for the Dreametech D10 Plus (RLS3D) model. It is not compatible with the Dreametech D10s Plus (RLS6AD) or Dreametech D10 Plus Gen2 models. Please verify your robot vacuum model before installation.

Image showing compatibility with Dreametech D10 Plus robot vacuum.
This image illustrates the compatibility of the replacement parts kit with the Dreametech D10 Plus robot vacuum cleaner. It highlights that the kit is designed for the D10 Plus model and not other variants.
Comparison image showing Dreametech D10 Plus compatibility versus D10 Plus Gen2 incompatibility.
This image visually distinguishes between the compatible Dreametech D10 Plus and the incompatible Dreametech D10 Plus Gen2, emphasizing the specific model for which these accessories are intended.

Package Contents

The HUIZHEN Replacement Parts Kit includes the following components:

  • 2 x Main Roller Brushes
  • 4 x Side Brushes (White, 3-Arm Spin)
  • 4 x HEPA Filters
  • 4 x Microfiber Mop Pads
  • 4 x Dust Bags (4L capacity)
An overhead view of all 18 replacement parts included in the kit: two main roller brushes, four side brushes, four HEPA filters, four mop pads, and four dust bags.
This image displays all 18 components of the HUIZHEN Replacement Parts Kit, including main roller brushes, side brushes, HEPA filters, mop pads, and dust bags, laid out for clear identification.

Installation Guide

1. Main Roller Brush Installation

  1. Turn off the robot vacuum and place it upside down on a clean, flat surface.
  2. Locate the brush guard cover, usually secured by clips or screws. Open or remove it.
  3. Remove the old main roller brush.
  4. Insert the new main roller brush into its designated slot, ensuring the ends align with the brush bearings.
  5. Close or re-secure the brush guard cover.
Diagram illustrating the structure of the main roller brush, highlighting its ABS material, soft nylon bristles, and V-shaped design for effective cleaning.
This diagram details the construction of the main roller brush, emphasizing its durable ABS material and soft nylon bristles designed for efficient dust collection without damaging floors.

2. Side Brush Installation

  1. Turn off the robot vacuum and place it upside down.
  2. Locate the side brushes. They are typically held in place by a screw or a snap-on mechanism.
  3. Remove the old side brush. If secured by a screw, use a screwdriver to loosen it.
  4. Align the new side brush with the corresponding slot and press it firmly or secure it with the screw.

Tip: If side brushes are bent or curled from shipping, please soak them in warm water for a few minutes to recover their shape. This will not affect the quality or performance.

Diagram showing the features of the side brush, including soft nylon bristles, a slot design for easy replacement, and small bristles to prevent tangling.
This diagram highlights the key features of the side brush, such as its soft nylon bristles for gentle cleaning, an easy-to-use slot design for replacement, and small bristles to minimize hair tangling.

3. HEPA Filter Installation

  1. Open the dustbin compartment of your robot vacuum.
  2. Remove the dustbin.
  3. Locate the old HEPA filter within the dustbin and remove it.
  4. Insert the new HEPA filter into the designated slot in the dustbin, ensuring a snug fit.
  5. Reinsert the dustbin into the robot vacuum and close the compartment.
Image showing a HEPA filter with arrows indicating airflow, demonstrating its function in filtering airborne particles.
This image illustrates the HEPA filter's function, showing arrows representing airflow through the filter, which effectively captures fine particles like dust, pollen, and mold.
Comparison of HUIZHEN HEPA filters with sealed edges versus other filters without sealing edges, highlighting the benefit of sealed edges in preventing dust ingress.
This comparison image demonstrates the advantage of HUIZHEN HEPA filters with sealed edges, which prevent dust from bypassing the filter through gaps, compared to filters without this sealing.

4. Mop Pad Installation

  1. Locate the mop pad attachment on the underside of the robot vacuum.
  2. Remove the used mop pad.
  3. Attach the new microfiber mop pad to the mop pad holder, ensuring it is securely fastened.
Image displaying the dimensions of the mop pad and highlighting its microfiber material, quality fabrics, and excellent sewing.
This image provides details about the mop pad, including its dimensions and key attributes such as microfiber material, quality fabric construction, and durable sewing.

5. Dust Bag Installation

  1. Open the auto-empty station's dust bag compartment.
  2. Carefully remove the full dust bag, ensuring the opening is sealed to prevent dust leakage.
  3. Insert a new HUIZHEN 4L dust bag into the compartment, aligning it correctly.
  4. Close the dust bag compartment securely.
Comparison image showing the size difference between original 2.5L dust bags and HUIZHEN upgraded 4.0L dust bags.
This image compares the dimensions and capacity of standard 2.5L dust bags with the larger 4.0L HUIZHEN upgraded dust bags, indicating increased storage capacity.

Maintenance and Replacement Schedule

To maintain optimal cleaning performance and extend the life of your Dreametech D10 Plus robot vacuum, it is recommended to replace consumable parts regularly. The replacement frequency may vary based on usage and environment (e.g., presence of pets, carpeted areas).

ComponentRecommended Replacement Frequency
Main Roller BrushEvery 6-12 months
Side BrushesEvery 3-6 months
HEPA FiltersEvery 3-6 months
Mop PadsEvery 1-3 months (or as needed, based on usage)
Dust BagsAs needed (when full, typically every 1-2 months)

Regularly inspect all components for wear and tear. Clean brushes and filters frequently between replacements to maintain efficiency.

Troubleshooting

  • Side brushes are bent: If side brushes appear bent or curled upon arrival, soak them in warm water for a few minutes. This will help them regain their original shape.
  • Reduced cleaning performance: Ensure all components (main brush, side brushes, HEPA filter, mop pad) are correctly installed and not excessively worn. Replace parts according to the recommended schedule.
  • Dust bag not fitting: Verify you have the correct dust bag for the Dreametech D10 Plus auto-empty station. HUIZHEN dust bags are designed for a 4L capacity. Ensure proper alignment during installation.
  • Parts do not fit: Double-check your robot vacuum model number. This kit is exclusively for Dreametech D10 Plus (RLS3D) and not compatible with D10s Plus (RLS6AD) or D10 Plus Gen2.

Specifications

  • Brand: HUIZHEN
  • Compatible Model: Dreametech D10 Plus (RLS3D)
  • Material: ABS materials, Soft nylon bristles, HEPA filter media, Microfiber fabric, 4-layer dust bag material
  • Package Quantity: 18 pieces
  • Included Components: 2 Main Roller Brushes, 4 Side Brushes, 4 HEPA Filters, 4 Mop Pads, 4 Dust Bags
  • Dust Bag Capacity: 4 Liters (HUIZHEN upgraded design)

Support

For further assistance or inquiries regarding your HUIZHEN Replacement Parts Kit, please contact your retailer or refer to the official Dreametech D10 Plus user manual for specific robot vacuum operation details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.